[Radiance-general] 3 phase method

[Greg Ward]

Welcome!

As there are different versions of this tutorial floating around, we need to know the exact command sequence you used and what operating systems (OS X, Windows, Linux, etc.) you are using to answer your question.

Also, it would be nice to know your name, as many of us do not read Japanese.

Best,
-Greg

> From: 杉原慧 <pkh0128 at eis.hokudai.ac.jp>
> Subject: [Radiance-general] 3 phase method
> Date: November 14, 2015 9:07:53 AM HST
> 
> Dear all
> 
> I'm new in 3 phase method. I have some problems during the procedure in the manual.
> I already got the good result in Example 1 and Example 2. the we are trying our model generated by GIS data.
> the final result by "rcalc -e '$1=$1;$2=$2;$3=$3' is as follows
> 
> 0 0 0 0
> 0 0 0 0
> 0 2015 3 0
> 0 2015 18 0
> 0 0 0 0
> 0 0 0 0
> 0 0 0 0
> 0 0 0 0
> 0 0 0 0
> 0.4684572 0.4684572 0.4684572 0
> 1.089234 1.089234 1.089234 0
> 1.797346 1.797346 1.797346 0
> 2.416459 2.416459 2.416459 0
> 0.231454 0.231454 0.231454 0
> 0.4810487 0.4810487 0.4810487 0
> 
> the last 6 rows would be the result of calculation.
> Do you know what it means the former 9 rows. Or do we have any mistake during the procedure?
> 
> Also, we use the following text as pts file. we believe the last three colums are the orientation of sensor.
> Is it OK? In the case of OK, Our above results have some error, because we have large window on the east side.
> Does someone knows what we should do?
> 
> -3.2387 0.2699 1 0 0 -1
> -3.2387 0.2699 1 0 0 1
> -3.2387 0.2699 1 0 1 0
> -3.2387 0.2699 1 1 0 0
> -3.2387 0.2699 1 -1 0 0
> -3.2387 0.2699 1 0 -1 0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.radiance-online.org/pipermail/radiance-general/attachments/20151114/7c35a162/attachment.html>