[Radiance-openstudio] OpenStudio on OSX 10.8

[Khalid]

I did not see any results, the simulation did not stop. I did made a change
on the weather file and reduce it to day days, to see whether it will stop
or not.
I will send you any result that I will get.

Thanks again

-----Original Message-----
From: Guglielmetti, Robert [mailto:Robert.Guglielmetti at nrel.gov] 
Sent: Tuesday, November 13, 2012 8:32 PM
To: Discussion of Radiance with OpenStudio
Subject: Re: [Radiance-openstudio] OpenStudio on OSX 10.8

Ok, then after the annual daylighting sim, you should have seen some
messages about the lighting, and then the glare analysis, and finally the
EnergyPlus messages.

I'm happy to work with you offline on this, if you want to send me any
results or screenshots directly (I assume you've noticed that the list
server rejects posts with attachments?).
 

Rob Guglielmetti
National Renewable Energy Laboratory (NREL) Commercial Buildings Research
Group
15013 Denver West Parkway MS:RSF202
Golden, CO 80401
303.275.4319
robert.guglielmetti at nrel.gov






On 11/13/12 10:15 AM, "Khalid" <khalid.ud at gmail.com> wrote:

>Thanks Rob,
>I Have one space and one illuminance map
>
>-----Original Message-----
>From: Guglielmetti, Robert [mailto:Robert.Guglielmetti at nrel.gov]
>Sent: Tuesday, November 13, 2012 8:08 PM
>To: Discussion of Radiance with OpenStudio
>Subject: Re: [Radiance-openstudio] OpenStudio on OSX 10.8
>
>OK, that's a good thing. How many spaces and illuminance maps do you 
>have in the model? Currently the program computes each map serially, 
>i.e. one at a time, so you'll have to wait for it to finish all the 
>maps before it's fully done. After that, it will do a dimming analysis 
>and create a lighting load schedule for EnergyPlus, which is then 
>automatically run as well. It can take some time on a large model with 
>lots of spaces. But it does sound like things are working for you. When 
>it's all done you should see a "finished"
>message and hopefully zero errors (there are usually warnings even on 
>successful runs), and then you can open the eplusout.sql file in 
>ResultsViewer to review the daylighting.
>
>Keep us posted!
>
>- Rob
>
>P.S. We are rewriting the daylighting script to compute all the points 
>in the model at one time, rather than space-by-space; this speeds up 
>the calculation times on large models significantly, and should be 
>available in the next iteration release which is due out early next 
>week.
>
>- Rob
> 
>
>Rob Guglielmetti
>National Renewable Energy Laboratory (NREL) Commercial Buildings 
>Research Group
>15013 Denver West Parkway MS:RSF202
>Golden, CO 80401
>303.275.4319
>robert.guglielmetti at nrel.gov
>
>
>
>
>
>
>On 11/13/12 9:55 AM, "Khalid" <khalid.ud at gmail.com> wrote:
>
>>Thanks
>>The simulation does not stop. It continue running after reaching  31 
>>December.
>>
>>-----Original Message-----
>>From: Guglielmetti, Robert [mailto:Robert.Guglielmetti at nrel.gov]
>>Sent: Tuesday, November 13, 2012 7:36 PM
>>To: Discussion of Radiance with OpenStudio
>>Subject: Re: [Radiance-openstudio] OpenStudio on OSX 10.8
>>
>>Thanks Chris! Yes, Khalid, the text output seems to indicate that the 
>>annual simulation is running; does it not continue on through to 
>>December?
>>
>>Rob Guglielmetti
>>National Renewable Energy Laboratory (NREL) Commercial Buildings 
>>Research Group
>>15013 Denver West Parkway MS:RSF202
>>Golden, CO 80401
>>303.275.4319
>>robert.guglielmetti at nrel.gov
>>
>>
>>
>>On 11/13/12 6:52 AM, "Christopher Rush"
>><Christopher.Rush at arup.com<mailto:Christopher.Rush at arup.com>> wrote:
>>
>>I'm not sure about OpenStudio specifically, but it looks like you're 
>>running an annual simulation. The last line seems to represent 
>>timestep
>>1
>>(January)
>>8 at 11:00:00 AM. Wouldn't you expect it to keep going until it gets 
>>to
>>12
>>31 23:00:00 for December 31?
>>
>>
>>From: Khalid [mailto:khalid.ud at gmail.com]
>>Sent: Tuesday, November 13, 2012 7:55 AM
>>To: 'Discussion of Radiance with OpenStudio'
>>Subject: Re: [Radiance-openstudio] OpenStudio on OSX 10.8
>>
>>Thanks Martin
>>
>>I did use Openstudio 0.9.4 . then it seem that radiance has start to 
>>work.
>>However, it does not stop And keep running as shown in this link:
>>https://www.dropbox.com/s/pqr6e9k7icn9ikf/RadFile.txt
>>
>>
>>I do appreciate if anybody can help in such problem
>>
>>Thanks
>>
>>
>>____________________________________________________________
>>Electronic mail messages entering and leaving Arup  business systems 
>>are scanned for acceptability of content and viruses
>>
>>_______________________________________________
>>Radiance-openstudio mailing list
>>Radiance-openstudio at radiance-online.org
>>http://www.radiance-online.org/mailman/listinfo/radiance-openstudio
>>-----
>>No virus found in this message.
>>Checked by AVG - www.avg.com
>>Version: 2013.0.2793 / Virus Database: 2624/5890 - Release Date:
>>11/12/12
>>
>>
>>_______________________________________________
>>Radiance-openstudio mailing list
>>Radiance-openstudio at radiance-online.org
>>http://www.radiance-online.org/mailman/listinfo/radiance-openstudio
>
>
>_______________________________________________
>Radiance-openstudio mailing list
>Radiance-openstudio at radiance-online.org
>http://www.radiance-online.org/mailman/listinfo/radiance-openstudio
>-----
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 2013.0.2793 / Virus Database: 2624/5890 - Release Date: 
>11/12/12
>
>
>_______________________________________________
>Radiance-openstudio mailing list
>Radiance-openstudio at radiance-online.org
>http://www.radiance-online.org/mailman/listinfo/radiance-openstudio


_______________________________________________
Radiance-openstudio mailing list
Radiance-openstudio at radiance-online.org
http://www.radiance-online.org/mailman/listinfo/radiance-openstudio
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.2793 / Virus Database: 2624/5890 - Release Date: 11/12/12