[Radiance-general] wrong results in daysim

[Tim Metcalfe]

Dear Alejandro,
It has been my experience that when creating interior partitions and pillars in Ecotect the intersecting planes can make some of your outside walls disappear. Making your model incomplete the fact that you are getting 100% in a closed box leads me to believe you are having a modeling issue and not a daysim issue. Check your visualize screen and make sure all your planes  are present

Regards,

Tim Metcalfe
Kalwall Corporation
Daylight Modeling Group
1111 Candia Road
Manchester, N.H. 03105
1(800)258-9777 X4483
P  Please consider your environmental responsibility before printing this e-mail


________________________________
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://radiance-online.org/pipermail/radiance-general/attachments/20100323/6bf2b332/attachment.html