[Radiance-general] lightpipes/ports

[Jan Wienold]

Hi Erico,

you should use RADIANCE 3.7, Patchlevel 2, which we have put also onto 
the same page. I just checked it and I could compile it without any 
problems on my linux machine.

Jan

Erico Rosa wrote:

> Hi Jan,
>
>  
>
> Thanks for the pointer. I've downloaded the pmap 4.3 version and tried 
> to compile/install (after performing a fresh installation of radiance 
> 3.7), but the pmap installation is unsuccessful, with the following 
> error messages being generated by 'makeall install' during the
>
> compilation:
>
>  
>
> ../lib/libpmap.a(pmapmat.o)(.text+0xf64): In function 
> `anisoSpecPhotonScatter':
>
> : undefined reference to `getacoords'
>
> ../lib/libpmap.a(pmapmat.o)(.text+0x1afb): In function 
> `dielectricPhotonScatter' :
>
> : undefined reference to `mylog'
>
> ../lib/libpmap.a(pmapmat.o)(.text+0x1b26): In function 
> `dielectricPhotonScatter' :
>
> : undefined reference to `mylog'
>
> ../lib/libpmap.a(pmapmat.o)(.text+0x1b51): In function 
> `dielectricPhotonScatter' :
>
> : undefined reference to `mylog'
>
> ../lib/libpmap.a(pmapmat.o)(.text+0x1db1): In function 
> `dielectricPhotonScatter' :
>
> : undefined reference to `mylog'
>
> ../lib/libpmap.a(pmapmat.o)(.text+0x1dd9): In function 
> `dielectricPhotonScatter' :
>
> : undefined reference to `mylog'
>
> ../lib/libpmap.a(pmapmat.o)(.text+0x1e01): more undefined references 
> to `mylog' follow
>
> collect2: ld returned 1 exit status
>
> make: *** [mkpmap] Error 1
>
> make: Target `install' not remade because of errors. ~/rad3R7/ray/src
>
>  
>
> Do you have any idea of what might be causing this?
>
>  
>
> Thanks in advance,
>
>  
>
> Erico
>
> -----Original Message-----
> From: Jan Wienold [mailto:jan.wienold at ise.fraunhofer.de]
> Sent: Saturday, January 14, 2006 1:30 AM
> To: Radiance general discussion
> Subject: Re: [Radiance-general] lightpipes/ports
>
>  
>
> Hi Erico,
>
> you probably should use the current version of photon-mapping(4.3), 
> which is for the RADIANCE 3.7. Roland made this new version some weeks 
> ago.
> I'm not sure, if this helps in your special case, but I never had such 
> problems with using photon-ports and I used it several times without 
> any problems (I always used the 3.28 version for RADIANCE 3.5).
>
> We are actually reorganizing our web-pages and unfortunately the 
> English (web)version is not available and the German version shows a 
> bug in direct linking. That's the reason, why I haven't posted it to 
> the community yet.
>
> Anyhow, it is already on a Web-page for downloading.
> You can get it on:
> http://www.ise.fraunhofer.de/german/fields/field6/mb4/index.html then 
> follow link on "Lichtsimulation", then "RADIANCE", then "p-map"
>
> Good luck!
>
> Jan
>
>
> Erico Rosa wrote:
>
> I'm running a simulation on hollow mirror lightpipes and I've 
> installed the photon map compiled by Carsten Bauer (at 
> http://www.cb-d.de/pmap/pmap.html) for Radiance 3.6. I also downloaded 
> the examples from Roland Schregle <mailto:ganjatron at gmx.net>'s webpage 
> (http://www.ise.fhg.de/alt-aber-aktiv/radiance/photon-map/download.html) 
> to run a "test drive". The Photon Map runs all scripts without any 
> problems until I use the examples with "ports". It falls into what 
> seems a loop where the progress reports give me an exorbitant 30,000% 
> (it's still running...). Will it stop eventually?
>
>  
>
> Does anybody have worked with the ports option and bumped into this 
> abnormal behaviour?
>
>  
>
> Erico
>
> erosa at gsd.harvard.edu <mailto:erosa at gsd.harvard.edu>
>
>  
>
> 
>
>
>
>------------------------------------------------------------------------
>
>
> 
>
>_______________________________________________
>
>Radiance-general mailing list
>
>Radiance-general at radiance-online.org <mailto:Radiance-general at radiance-online.org>
>
>http://www.radiance-online.org/mailman/listinfo/radiance-general
>
>  
>
>
>
>-- 
>
>Dipl.-Ing. Jan Wienold
>
>Project Manager
>
>Fraunhofer-Institut für Solare Energiesysteme
>
>Thermal Systems and Buildings, Lighting and Daylighting
>
>Heidenhofstr. 2, 79110 Freiburg, Germany
>
>Phone: +49(0)761 4588 5133 Fax:+49(0)761 4588 9133
>
>jan.wienold at ise.fraunhofer.de <mailto:jan.wienold at ise.fraunhofer.de>
>
>http://www.ise.fraunhofer.de
>
> 
>
>In office: 
>
>Mo,Tue: 9:00-18:00
>
>We-Fr:  8:30-14:00
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Radiance-general mailing list
>Radiance-general at radiance-online.org
>http://www.radiance-online.org/mailman/listinfo/radiance-general
>  
>

-- 
Dipl.-Ing. Jan Wienold
Project Manager
Fraunhofer-Institut für Solare Energiesysteme
Thermal Systems and Buildings, Lighting and Daylighting
Heidenhofstr. 2, 79110 Freiburg, Germany
Phone: +49(0)761 4588 5133 Fax:+49(0)761 4588 9133
jan.wienold at ise.fraunhofer.de
http://www.ise.fraunhofer.de

In office: 
Mo,Tue: 9:00-18:00
We-Fr:  8:30-14:00

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://radiance-online.org/pipermail/radiance-general/attachments/20060115/0e5aa2b2/attachment-0001.htm