[Radiance-general] Radiance in virtual Win 10

Mon Oct 30 18:17:17 PDT 2017

Hi Rob and Martin,

Honeybee[+] doesn't currently deal with photon mapping. Version 5.0.a.12
should work fine with Honeybee[+].

Mostapha

On Mon, Oct 30, 2017 at 3:30 PM, Guglielmetti, Robert <
Robert.Guglielmetti at nrel.gov> wrote:

> Unless Honeybee et al. tools are using the photon map stuff, there isn’t
> much difference between 5.0.a.12 and 5.1.0 that would absolutely require
> the latter. Mostapha, what’s the verdict there? I can try to expedite a
> 5.1.1 if you really need that version...
>
> - Rob
>
>
> On 10/30/17, 1:16 PM, "Martin Klingler" <martin at lichttechnik.co.at> wrote:
>
> >Well that is a step. I just tested it, and I do not have the same error -
> >that is fine.
> >
> >But - I try to setup a virtual machine with Rhino/Grasshopper/Honeybee[+]
> >and for that the latest version 5.1.0 is necessary. If Mostapha is
> >reading this -
> > is that true?
> >
> >Looks like I have to find another solution.
> >
> >Thank you very much in any case
> >Martin
> >------------------------------------
> >Lichttechnik Martin Klingler
> >Spraidt 7
> >5271 Moosbach
> >AUSTRIA
> >Tel ++43-7724-443833
> >Fax ++43-7724-443838
> >email martin at lichttechnik.co.at
> >
> >Original Message
> >
> >Subject:
> >Re: [Radiance-general] Radiance in virtual Win 10
> >Sent:
> >Montag, 30. Oktober 2017 17:34
> >From:
> >Guglielmetti, Robert (radiance-general at radiance-online.org)
> >Yeah, that sounds like a broader problem. =/ We have had some issues of
> >late, getting all the executables to work properly on Windows. Changes to
> >Qt versions and compilers have fixed some problems and introduced others.
> >We are working on it as we can, but for now your best bet is to use the
> >previous installer release (5.0.a.12), which you can grab here:
> >https://github.com/NREL/Radiance/releases/tag/5.0.a.12
> ><https://na01.safelinks.protection.outlook.com/?url=
> https%3A%2F%2Fgithub.c
> >om%2FNREL%2FRadiance%2Freleases%2Ftag%2F5.0.a.12&
> data=02%7C01%7Crobert.gug
> >lielmetti%40nrel.gov%7C036b126a5c88496687e608d51fc9
> fa9d%7Ca0f29d7e28cd4f54
> >84427885aee7c080%7C0%7C0%7C636449874712339144&sdata=
> wBLrLkuQIzLiJAq0mauVf%
> >2BJsT5PdlmEB5p5KNLdlD%2FM%3D&reserved=0>
> >
> >
> >On 10/30/17, 12:57 AM, "Martin Klingler" <martin at lichttechnik.co.at>
> >wrote:
> >
> >>I did not check systematically. But I get it for rpict, rtrace, ies2rad,
> >>obj2rad, genclock, gendaylit, total, rlam, icalc, rcontrib, getinfo ... I
> >>have the
> >> feeling I will get it for all.
> >>
> >>Martin
> >>------------------------------------
> >>Lichttechnik Martin Klingler
> >>Spraidt 7
> >>5271 Moosbach
> >>AUSTRIA
> >>Tel ++43-7724-443833
> >>Fax ++43-7724-443838
> >>email martin at lichttechnik.co.at
> >>
> >>Original Message
> >>
> >>Subject:
> >>Re: [Radiance-general] Radiance in virtual Win 10
> >>Sent:
> >>Montag, 30. Oktober 2017 02:21
> >>From:
> >>Guglielmetti, Robert (R
> >><mailto:Robert.Guglielmetti at nrel.gov>obert.Guglie
> >><mailto:Robert.Guglielmetti at nrel.gov>lmetti at nrel.gov
> >><mailto:Robert.Guglielmetti at nrel.gov>)
> >>Are you getting this error for all the Radiance executables you try, or
> >>just one or more specific ones?
> >>
> >>- Rob
> >>
> >>On 10/29/17, 1:29 AM, "Martin Klingler" <martin at lichttechnik.co.at>
> >>wrote:
> >>
> >>>Hi radiance community,
> >>>
> >>>I just tried to install radiance (NREL binaries 5.1.0) in a clean
> >>>windows
> >>>10 64 bit virtual machine (Fusion 8.5.8). When I start a program from
> >>>the
> >>>command
> >>> line I get the error "The application was unable to start correctly
> >>>0xc000007b".
> >>>
> >>>Does anybody have an idea what is going wrong here? There are a lot of
> >>>hints on the net concerning this error. But I did not find the right one
> >>>yet.
> >>>
> >>>Many thanks and best regards
> >>>Martin
> >>>------------------------------------
> >>>Lichttechnik Martin Klingler
> >>>Spraidt 7
> >>>5271 Moosbach
> >>>AUSTRIA
> >>>Tel ++43-7724-443833
> >>>Fax ++43-7724-443838
> >>>email martin at lichttechnik.co.at
> >>
> >>
> >
> >_______________________________________________
> >Radiance-general mailing list
> >Radiance-general at radiance-online.org
> >https://www.radiance-online.org/mailman/listinfo/radiance-general
> ><https://na01.safelinks.protection.outlook.com/?url=
> https%3A%2F%2Fwww.radi
> >ance-online.org%2Fmailman%2Flistinfo%2Fradiance-general&
> data=02%7C01%7Crob
> >ert.guglielmetti%40nrel.gov%7C036b126a5c88496687e608d51fc9
> fa9d%7Ca0f29d7e2
> >8cd4f5484427885aee7c080%7C0%7C0%7C636449874712339144&
> sdata=ikmi54c0EWaFOcv
> >2BGTT%2FyRB4yI1eL9eRlPAfBW1vpE%3D&reserved=0>
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.radiance-online.org/pipermail/radiance-general/attachments/20171030/dbe6e339/attachment.html>