[Radiance-general] rpict command for photon mapping

[Greg Ward]

Hi Katsuya,

With the -t 60 option, you should at least get a "0% done" message after initialization.  Is that message even showing up?  You might not see reports every 60 seconds if the scanline writes take longer than that, but you should at least get the initialization output.  If you are not seeing that, then something else must be wrong with your command, or the photon map(s) are not loading correctly.  I don't know how to verify this, other than regenerating the maps and trying again.

What happens when you run the same command without the photon maps?  What happens when you run with the photon maps and -ab -1?

Does anyone else have experience/suggestions to offer?

Cheers,
-Greg

> From: Katsuya Obara <katsuya.obara at arup.com>
> Date: October 27, 2016 6:26:41 PM PDT
> 
> Hi Greg,
>  
> Thank you for your reply.
> Below is the command I tried to run for rpict.
> rpict -t 60 -ap global.pmap 50 -ap caustic 200 -ab 1 -vf view.vf model.oct
>  
> Following your advice, I changed the command to add output redirection as below.
> rpict -t 60 -ap global.pmap 50 -ap caustic 200 -ab 1 -vf view.vf model.oct >test.result
>  
> It seems that I could run command but it does not report any progress. Are there any specific format I should specify for output file?
>  
> Thank you!
> Regards,
> Katsuya
>  
> From: Greg Ward [mailto:gregoryjward at gmail.com] 
> To: Radiance general discussion
>  
> Can you offer any details about what process is starting all the (unsuccessful?) rpict commands?  It seems that there is no output redirection, so this is not even a command you would normally run.  What is running it for you?
>  
> Best,
> -Greg
> 
> 
> From: Katsuya Obara <katsuya.obara at arup.com>
> Date: October 27, 2016 1:29:58 AM PDT
>  
> Hi all,
>  
> I am trying to create rendering image using photon map.
> Following the photon map extension user manual, I could run mkpmap command.
> But when I try to run rpict command, it seems that they keep trying to run the command and failing as following image.
> Can anyone advise me what is causing this problem and how to solve it.
> Thank you very much for your help!
>  
>  
> Katsuya
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.radiance-online.org/pipermail/radiance-general/attachments/20161028/4fca4314/attachment.html>