[Radiance-general] sudo recontrib
urtza.uriarte at upc.edu
urtza.uriarte at upc.edu
Tue Mar 22 01:46:01 PDT 2016
Dear Greg,
That are the output of getinfo:
photocells.vmx:
#?RADIANCE
oconv material.rad sc-vi3Mphase.rad window.rad
rcontrib -f /usr/share/radiance/klems_int.cal -b
kbin(-sqrt(.5),sqrt(.5),0,0,0,1) -bn Nkbins -m windowglow -I+ -ab 2 -ad
1000 -lw 2e-5 -y 552
SOFTWARE= RADIANCE 5.0a (NREL build 5.0.a.2) lastmod Fri Apr 24 15:04:00
MDT 2015 by googs on lu040t-001
CAPDATE= 2016:03:21 10:54:51
GMT= 2016:03:21 09:54:51
NCOMP=3
NROWS=552
NCOLS=145
FORMAT=ascii
southest.dmx:
#?RADIANCE
oconv material.rad sc-vi3Mphase.rad sky_overcast.rad
rcontrib -c 1000 -e MF:4 -f reinhart.cal -b rbin -bn Nrbins -m sky_glow
SOFTWARE= RADIANCE 5.0a (NREL build 5.0.a.2) lastmod Fri Apr 24 15:04:00
MDT 2015 by googs on lu040t-001
CAPDATE= 2016:03:22 09:22:32
GMT= 2016:03:22 08:22:32
NCOMP=3
NCOLS=2306
FORMAT=ascii
Barcelona.smx:
#?RADIANCE
gendaymtx -m 4 Barcelona.wea
LATLONG= 41.28000000 2.07000000
NROWS=2306
NCOLS=8760
NCOMP=3
FORMAT=ascii
(In the southest.dmx I add NROWS=145 with test editor after. I have
launched with that data but it scripts the same error)
And If I am understanding well, the output of dctimestep is this script (It
does not script nothing more):
fatal - unexpected EOF reading Barcelona.smx
Thank you very much in advance.
Best regards,
Urtza.
Greg Ward <gregoryjward at gmail.com> escribió:
> Can you send the output of "getinfo" on your matrix files, i.e.:
> getinfo photocells.vmx southest.dmx Barcelona.smx
>
> Also, send the output of dctimestep executed with no arguments. (It
> should produce a usage message.)
>
> Thanks,
> -Greg
>
>
>> FROM: urtza.uriarte at upc.edu
>>
>> SUBJECT: Re: [Radiance-general] sudo recontrib
>>
>> DATE: March 21, 2016 6:32:24 AM PDT
>>
>>
>
>>
Yes, I have in View Matrix NROWS=552 and NCOLS=145 (I think that you have
6 sensor points, so 6x145).
Does it make sense? I think they are 145 Klems patches.
Best regards,
Urtza.
Humberto Antunes <hs.antunes at campus.fct.unl.pt> escribió:
> I have read more carefully you e-mail, do you have 552 sensor points? if
> yes your number of rows in the view matrix is 552 and not 145, try to
> change NROWS=552 in you view matrix.
> Best regards
> Humberto A.
>
>
> 2016-03-21 12:38 GMT+00:00 <urtza.uriarte at upc.edu>:
>
>> _Dear Humberto,
>>
>> Yes, I am trying without "-n 8760" option, as follow:
>>
>> dctimestep photocells.vmx Film3M_145x1297_9142012_t.xml southest.dmx
>> Barcelona.smx
>> fatal - unexpected EOF reading Barcelona.smx
>>
>> I do not know. Thank you,
>> Urtza.
>>
>> Humberto Antunes <hs.antunes at campus.fct.unl.pt> escribió:_
>>
>>> _Hi Urtza,_ _ _
>>> _Are you running dctimestep with the "-n" option? If yes try
>>> to run it without it. use:_
>>> _ _
>>> _dctimestep view.mtx daylight.mtx transmision.xml sky.mtx_
>>> _ _
>>> _For me this solved the problem, no need for the "-n 8760"
>>> option._
>>> _ _
>>> _Hope it helps._
>>> _ _
>>> _Best regards_
>>> _Humberto A._
>>>
>>>
>>> _2016-03-21 11:16 GMT+00:00 <urtza.uriarte at upc.edu>:_
>>>
>>>> __Dear Andy and Greg,
>>>>
>>>> (I am trying to follow Humberto's issue, as well)
>>>> I have added to View Matrix sensor points number (I notice that in
>>>> Daylight Matrix I have not had NROWS data and I have added
>>>> NROWS=145). To sum up I have; Sky Matrix, 2306x8760; Daylight Matrix,
>>>> 145x2306; and View Matrix, 552x145. I launched dctimestep and it
>>>> scripts the same error (fatal - unexpected EOF reading Barcelona.smx).
>>>>
>>>> In case, I review the Sky Matrix with "wc" and I get almost the
>>>> number that Greg suggested:
>>>>
>>>> wc Barcelona.smx
>>>>
>>>> 20202874 60601692 213155298 Barcelona.smx
>>>>
>>>> I do not know what is the problem with Sky Matrix (although it seems
>>>> a little estrange 2306x8760 data are in rows).
>>>> Thank you in advance,
>>>> Urtza.
>>>>
>>>> "Gregory J. Ward" <gregoryjward at gmail.com> escribió:__
>>>>
>>>>> __Following this up on the general mailing list...__
>>>>> __ __
>>>>> __The problem was the one Andy pointed out earlier,
>>>>> where the newer version of dctimestep doesn't want the "-n" option
>>>>> when the sky matrix has a header.__
>>>>> __ __
>>>>> __Regarding the new question (appearing below),
>>>>> using rmtxop in this way is indeed the simplest means to convert RGB
>>>>> irradiance to illuminance in lux.__
>>>>> __ __
>>>>> __Cheers,__
>>>>> __-Greg__
>>>>>
>>>>>
>>>>>> __FROM: Humberto Antunes <hs.antunes at campus.fct.unl.pt>__
>>>>>> __SUBJECT: Re: dctimesteps__
>>>>>> __DATE: March 20, 2016 6:04:36 PM PDT__
>>>>>> __ __
>>>>>
>>>>>> __I tried to run the command like that and it worked just fine, i
>>>>>> got the same results as you did.__
>>>>>> __ __
>>>>>> __I was running the dctimestep command with the
>>>>>> -n 8760 option, but this is not needed because the sky matrix
>>>>>> already contains that info in the header, running it like you
>>>>>> solved the issue.__
>>>>>> __ __
>>>>>> __Now there is just one thing remaining, to
>>>>>> convert the RGB values from illum.dat file to illuminance values
>>>>>> can i use the command below or is there a better way?__
>>>>>> __ __
>>>>>> __rmtxop -c 47.435 119.93 11.635
>>>>>> results/illum.dat> results/illum_final.dat__
>>>>>> __ __
>>>>>> __Note:__
>>>>>> __179*0.265=47.436__
>>>>>> __179*0.670=119.93__
>>>>>> __179*0.065=11.635__
>>>>>> __ __
>>>>>> __Best regards__
>>>>>> __Humberto A.__
>>>>>>
>>>>>>
>>>>>> __2016-03-21 0:01 GMT+00:00 Gregory J.
>>>>>> Ward <gregoryjward at gmail.com>:__
>>>>>>
>>>>>>> __Thanks, Humberto. I ran the following command:__
>>>>>>> __ __
>>>>>>> __dctimestep photocells.vmx singleclear.xml
>>>>>>> south.dmx lisboa.smx > illum.dat__
>>>>>>> __ __
>>>>>>> __without complaint. I am attaching the
>>>>>>> result.__
>>>>>>> __ __
>>>>>>> __Are you sure you have a recent
>>>>>>> installation of dctimestep? What do you see when you run
>>>>>>> dctimestep with no arguments? You should get:__
>>>>>>> __ __
>>>>>>> __Usage: dctimestep
>>>>>>> [-n nsteps][-o ospec][-i{f|d|h}][-o{f|d}] DCspec [skyf]__
>>>>>>> __ or: dctimestep [-n nsteps][-o
>>>>>>> ospec][-i{f|d|h}][-o{f|d}] Vspec Tbsdf Dmat.dat [skyf]__
>>>>>>>
>>>>>>> __ __
>>>>>>> __Cheers,__
>>>>>>> __-Greg__
>>>>>>> __ __
>>>>>>> __ __
>>>>>
>>>>>> __FROM: Greg Ward <gward at lmi.net>__
>>>>>>
>>>>>> __SUBJECT: Re: [Radiance-general] sudo recontrib__
>>>>>>
>>>>>> __DATE: March 20, 2016 2:47:23 PM PDT__
>>>>>>
>>>>>> __ __
>>>>>
>>>>>> __Hi Humberto,__
>>>>>> __ __
>>>>>> __Actually, your header and ASCII data look OK.
>>>>>> Although some tools would put all the columns together in one
>>>>>> humungous line with 8760x3, white space has no meaning here and
>>>>>> gendaymtx output has a newline for each column entry with an extra
>>>>>> empty line between rows.__
>>>>>> __ __
>>>>>> __If you run the "wc" command on your file, you
>>>>>> should get something like:__
>>>>>> __ __
>>>>>> __20202873 60601692 xxxxxxxxxxx lisboa.smx__
>>>>>> __ __
>>>>>> __I don't know what xxxxxxx will be, but some
>>>>>> large number corresponding to the number of bytes in your file.
>>>>>> The first two values may not be exactly this, but should be
>>>>>> reasonably close. Otherwise, your file really is missing some data
>>>>>> at the end.__
>>>>>> __ __
>>>>>> __If your numbers agree roughly with the above,
>>>>>> please send me a gzip'ped copies of your lisboa.wea and the output
>>>>>> (*.smx) file in a private e-mail and I will see if I can figure out
>>>>>> what is going on.__
>>>>>> __ __
>>>>>> __Cheers,__
>>>>>> __-Greg__
>>>>>>
>>>>>>> __FROM: Humberto Antunes <hs.antunes at campus.fct.unl.pt>__
>>>>>>>
>>>>>>> __SUBJECT: Re: [Radiance-general] sudo
recontrib__
>>>>>>>
>>>>>>> __DATE: March 20, 2016 2:30:23 PM PDT__
>>>>>>>
>>>>>>> __ __
>>>>>>
>>>>>>> __Hi Urtza and Andy,__ __ __
>>>>>>> __I am having the same issue as you do Urtza, I
>>>>>>> have already checked the headers of my view matrix, daylight
>>>>>>> matrix and sky matrix, and that doesn't seem to be the problem, my
>>>>>>> view matrix is a 6X145, the daylight matrix a 145X2306, and
>>>>>>> finally, the sky matrix is a 2306X8760, and this info is on the
>>>>>>> headers of each.__
>>>>>>> __ __
>>>>>>> __I think the problem is in the sky matrix file
>>>>>>> itself, it's not being properly written.__
>>>>>>> __ __
>>>>>>> __Mine looks like this:__
>>>>>>> __#?RADIANCE__
>>>>>>> __gendaymtx -m 4 weather/lisboa.wea__
>>>>>>> __LATLONG= 38.73000000 -9.15000000__
>>>>>>> __NROWS=2306__
>>>>>>> __NCOLS=8760__
>>>>>>> __NCOMP=3__
>>>>>>> __FORMAT=ascii__
>>>>>>> __ __
>>>>>>> __0 0 0__
>>>>>>> __0 0 0__
>>>>>>> __0 0 0__
>>>>>>> __0 0 0__
>>>>>>> __0 0 0__
>>>>>>> __0 0 0__
>>>>>>> __0 0 0__
>>>>>>> __0.477 0.477 0.477__
>>>>>>> __1.85 1.85 1.85__
>>>>>>> __4.85 4.85 4.85__
>>>>>>> __11.6 11.6 11.6__
>>>>>>> __10.5 10.5 10.5__
>>>>>>>
>>>>>>> __...__
>>>>>>> __ __
>>>>>>> __ __
>>>>>>> __So it doesn't have the number of columns it
>>>>>>> should, i think that each row has the RGB value for one patch of
>>>>>>> one time step and it should have the RGB values for all time steps
>>>>>>> of one patch, is that it?__
>>>>>>> __ __
>>>>>>> __Best regards__
>>>>>>> __Humberto A.__
>>>>
>>>>
>>>> _ _
>>>>
>>>> _________________________________________________
>>>> Radiance-general mailing list
>>>> Radiance-general at radiance-online.org
>>>> http://www.radiance-online.org/mailman/listinfo/radiance-general_
>>>> _
>>
>>
>>
>>
>> ________________________________________________
>> Radiance-general mailing list
>> Radiance-general at radiance-online.org
>> http://www.radiance-online.org/mailman/listinfo/radiance-general_
>>
_______________________________________________
Radiance-general mailing list
Radiance-general at radiance-online.org
http://www.radiance-online.org/mailman/listinfo/radiance-general
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.radiance-online.org/pipermail/radiance-general/attachments/20160322/c44d6b3c/attachment-0001.html>
More information about the Radiance-general
mailing list