[Radiance-general] sudo recontrib

[urtza.uriarte at upc.edu]

  Dear Andy,

I have tried with; 

sudo chmod 664 GenericTranslucent20.dat
sudo chmod 664 rang.cal

  sudo chmod 644 GenericTranslucent20.dat
sudo chmod 644 rang.cal

   sudo chmod 600 GenericTranslucent20.dat
sudo chmod 600 rang.cal

sudo chmod 700 GenericTranslucent20.dat
sudo chmod 700 rang.cal

and the padlock continues anyway (The files there are in
/usr/local/bin/radiance/bin/ and  /usr/local/bin/radiance/lib/, as well).
I have tried with rcontrib and it scripts this anyway:
 
   rcontrib -f /usr/share/radiance/klems_int.cal -b
'kbin(-sqrt(.5),sqrt(.5),0,0,0,1)' -bn Nkbins -m windowglow -I+ -ab 2 -ad
512 -lw 2e-5 sc-vi3M_vmx.oct < sc-vi3M.pts > photocells1.vmx

    rcontrib: fatal - cannot find data file "GenericTranslucent20.dat"

I do not know what happen but I will continue finding an error (that
padlock is very strange). 
Thank you very much.
Best regards,
Urtza.
     

    


urtza.uriarte at upc.edu escribió:

> Dear Andy,
> Thank you very much for your instructions.
> I will try with them.
> Best regards,
> Urtza.
>
> Andy McNeil <mcneil.andrew at gmail.com> escribió:
>
>> Urtza,        Here's some more information on file ownership and
>> permissions for linux:
>>     http://linuxcommand.org/lc3_lts0090.php
>>     Andy
>>
>>
>>     On Tue, Mar 15, 2016 at 11:23 AM, Andy McNeil
>> <mcneil.andrew at gmail.com> wrote:
>>
>>> Urtza,               
>>>        You should open up permissions on those two files like so:
>>>            
>>>         sudo chmod 664 GenericTranslucent20.dat
>>>         sudo chmod 664 rang.cal
>>>          
>>>         This changes permissions to allow owner and group read/write
>>> and everyone read.
>>>         (you need to be in the directory or give the full path to the
>>> file).
>>>          
>>>         Andy
>>>
>>>
>>>                         On Tue, Mar 15, 2016 at 9:19 AM,
>>> <urtza.uriarte at upc.edu> wrote:
>>>
>>>> _Dear Lars,
>>>>
>>>> Thank you very much for your reply. 
>>>>
>>>> I tried with Five-Phase method earlier and all command worked.
>>>> However, now I exported the model from Rhino and I have some
>>>> materials that they need two specific files. I do not why they do not
>>>> run without sudo, placing where there are others, as well (They keep
>>>> always the padlock, I copy there from DIVA's files. They are not from
>>>> radiance package previously installed). I use oconv, rtrace and rpict
>>>> with sudo and they work without problem. Nervertheless, if using sudo
>>>> is not good I remove those materials and I could use rcontrib without
>>>> sudo. 
>>>>
>>>> Thank you for your suggestions. I read Axel Jacob's tutorials but
>>>> rereading will be fine.
>>>> Best regards for you,
>>>> Urtza.
>>>>
>>>> "Lars O. Grobe" <grobe at gmx.net> escribió:_
>>>>
>>>>> _Dear Urtza,
>>>>>
>>>>> two comments on your installation - this should be solved before you
>>>>> even start using a complicated combination of commands such as the
>>>>> three-phase method.
>>>>>
>>>>> First, with a correct configuration of your system you will not need
>>>>> to run rcontrib as super-user (sudo). Your regular user account just
>>>>> needs read-access to the .dat and .cal files in this case, so why
>>>>> would you not grant the proper permissions?
>>>>>
>>>>> Second, as rcontrib is not found, what makes you think it is
>>>>> installed? Did you install Radiance from sources, did the build
>>>>> complete without errors, and did you include the directory
>>>>> containing the binaries in your PATH environment variable? Does any
>>>>> other Radiance command work for you?
>>>>>
>>>>> I would recommend having a look at Axel Jacob's set of tutorials
>>>>> first, including the unix-introduction. Otherwise you risk messing
>>>>> up a lot of your models with work-arounds, and even risk the
>>>>> integrity of your system by using sudo where it should definitively
>>>>> not be applied.
>>>>>
>>>>> Cheers, Lars._
>>>>>  
>>>>>
>>>>>> _ _
>>>>
>>>>               _Dear experts,
>>>>
>>>> I am trying with Three-Phase Method for Simulating Complex
>>>> Fenestration, following A McNeil tutorial.
>>>>
>>>> I am using Ubuntu 14 OS. I need use sudo command because I have
>>>> GenericTranslucent20.dat material and rang.cal that they are locked
>>>> anyway. However, when I have launched sudo rcontrib, it scripts that:
>>>>  _
>>>>
>>>> _sudo rcontrib -f /usr/share/radiance/klems_int.cal -b
>>>> 'kbin(-sqrt(.5),sqrt(.5),0,0,0,1)' -bn Nkbins -m windowglow -I+ -ab 2
>>>> -ad 512 -lw 2e-5 sc-vi3M_vmx.oct < sc-vi3M.pts > photocells.vmx_
>>>>
>>>> _sudo: rcontrib: command not found
>>>>
>>>> Could someone say what the problem is? Thank you in advance.
>>>> Best regards,
>>>> Urtza._
>>>>
>>>>
>>>>  
>>>>
>>>> ________________________________________________
>>>> Radiance-general mailing list
>>>> Radiance-general at radiance-online.org
>>>> http://www.radiance-online.org/mailman/listinfo/radiance-general_
>>>>  
>
>
>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.radiance-online.org/pipermail/radiance-general/attachments/20160316/e088d9dc/attachment.html>