[Radiance-general] rcontrib: warning - partial accumulaton in final record

[Guglielmetti, Robert]

It does, but you can still slip in default overrides in some of your setup files (which it does not look like you've done here). Your sky looks good, with the ground first and then the sky. Not sure what's going on.

On 8/5/16, 9:11 AM, "Germán Molina Larrain" <germolinal at gmail.com<mailto:germolinal at gmail.com>> wrote:

Hello Rob,

I thought RFLUXMTX managed all those options for us!  It looks like this... I am not sure how many rays are getting into it through the STDIN, though

The STDOUT looks like this:

#?RADIANCE
oconv -f ./Materials/materials.mat ./scene.rad ./Windows/windows.rad ./Skies/white_sky.rad
rcontrib -fo+ -ab 3 -ad 512 -lw 1e-3 -fda -c 10000 -bn 1 -b if(-Dx*0-Dy*0-Dz*1,0,-1) -m ground_glow -f reinhartb.cal -p MF=1,rNx=0,rNy=0,rNz=-1,Ux=0,Uy=1,Uz=0,RHS=+1 -bn Nrbins -b rbin -m sky_glow -y 145
SOFTWARE= NREL 5.0.a.11 (by googs 2016.05.24) based on RADIANCE 5.0 Official Release by G. Ward
CAPDATE= 2016:08:05 10:45:38
GMT= 2016:08:05 13:45:38
NCOMP=3
NROWS=145
NCOLS=146
FORMAT=ascii

2016-08-05 12:03 GMT-03:00 Guglielmetti, Robert <Robert.Guglielmetti at nrel.gov<mailto:Robert.Guglielmetti at nrel.gov>>:
What's the STDOUT look like from that rfluxmtx command? I hit this issue once, when I had a '-c (n)'  somewhere in my command pipeline and it wasn't consistent.

On 8/5/16, 8:48 AM, "Germán Molina Larrain" <germolinal at gmail.com<mailto:germolinal at gmail.com><mailto:germolinal at gmail.com<mailto:germolinal at gmail.com>>> wrote:

Hello everyone,

I have a question that I could not solve using Google, so I brought it to you guys. I have been playing a bit with RFLUXMTX with the purpose of implementing multi-phase methods for Tubular Daylight Devices,  but I am getting the error shown in the title of this e-mail.

"RCONTRIB: Warning - partial accumulation in final record"

I am using the command:

rfluxmtx -ab 3 -ad 512 -lw 1e-3 ./TDDs/4-TDD.top ./Skies/white_sky.rad ./Materials/materials.mat ./scene.rad ./Windows/windows.rad > ./DC/4-TDD-sky.mtx

The content of the files is specified below my signature.

Any idea what might be happening? I have seen that this happens "sometimes" (even for the same command)... is it a memory issue? user error? should this be in the developers list?

I AM USING NREL's x64 WINDOWS BINARIES

Thanks in advance to all!

Germán

================================================

where  4-TDD.top file is

#@rfluxmtx h=kf u=Y
void light lens_mat 0 0 3 1 1 1

 lens_mat     polygon    4370_4
0
0
72    1.45    1.3414213562373087    3.34
    1.49    1.373205080756887    3.34
    1.54    1.3    3.34
    1.59    1.39    3.34
...

and white_sky.rad is

#@rfluxmtx h=u u=Y
void glow ground_glow
0 0 4     1 1 1 0

ground_glow source ground
0 0 4     0 0 -1 180

#@rfluxmtx h=r1 u=Y
void glow sky_glow
0 0 4     1 1 1 0

sky_glow source sky
0 0 4     0 0 1 180



_______________________________________________
Radiance-general mailing list
Radiance-general at radiance-online.org<mailto:Radiance-general at radiance-online.org>
http://www.radiance-online.org/mailman/listinfo/radiance-general