[Radiance-general] 5-phase method model reflectance

[giulioandrea antonutto foi]

Off topic completely… 
your setting for dj and st are a bit odd. maybe interesting to know if there is a reason.
A jitter of 100% will lead to aiming failure? 
and also setting a specular threshold to 100% will mean no specular sampling?
unless there is a reason? new radiance settings meaning different things?
just a curiosity.
G.



On 17 Jun 2015, at 17:56, Eleonora Brembilla <E.Brembilla at lboro.ac.uk> wrote:

> At first I thought the reflectances assigned to the model would not matter for the part that is specific to the 5-phase, as the model is assigned a black material, but comparing the resulting matrices it looks like the Sun Coefficient Matrix (.dsc) changes with the original materials’ reflectances (and it’s the only matrix that change). And that is exactly the matrix that is taking most of the computational effort (about 4 hours I think - the same model with the 2-phase method takes 5 minutes, glazing is all simple clear glass).
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.radiance-online.org/pipermail/radiance-general/attachments/20150617/a31d7afd/attachment.html>