[Radiance-general] pcond, luminance or visible radiation?

[minchaca]

Hi, and thank you for your reply!!

If I select the output of gendaylit -O 2 (lm/m^2/sr) then I generate the
picture using rpict, convert to human visual response using pcond
-h and then to bmp using ra_bmp then I get a picture that is visually more
brighter than if I select the output of gendaylit -O 0 (default) and then
multiply by 179.

I confirm, when I use -O 2 (output lm/m^2/sr) then I don't multiply by 179,
only when I select the default output (W/m^2/sr).

I don't have problem with the results of the values, but with the generated
picture, using the default of the parameter -O the picture looks less
brighter
(even after *179).

I wonder which of the two pictures is the right one, as it doesn't seem to
have anything to do with the results of the values, but with the way how
the image
is created...I guess...


I really apprecieate your help!

:)


2013/8/5 Christopher Rush <Christopher.Rush at arup.com>

>  Can you clarify the exact process when you say the picture looks less
> bright? The picture out of pcond is just visually less bright? If you’re
> looking at values prior to using pcond, your process to get values out of
> your image is probably based on the assumption that the scene is set up
> using defaults (visible W/m^2/sr). If you convert to lumens in your scene
> description from gendaylit, then you have to be careful that you’re not
> again converting to lumens (with a 179 multiplier) after your calculation.
> ****
>
> ** **
>
> *From:* minchaca [mailto:miinchaca at gmail.com]
> *Sent:* Monday, August 05, 2013 8:13 AM
> *To:* radiance-general at radiance-online.org
> *Subject:* [Radiance-general] pcond, luminance or visible radiation?****
>
> ** **
>
> Hi all, I'd appreciate your help on the following question:****
>
>
> I'm creating a radiance scene using gendaylit to generate the sky, since I
> have data of the diffuse horizontal and direct normal irradiance (W/m^2)
> I'm using the -W option and then -O 2 to obtain the output in lm/m^2/sr
> (luminance). Then I'm using rpict to generate the picture, and pcond -h to
> convert it to a human visual response.
>
> But I realized that if I use the default value of -O in gendaylit (output
> in radiance of the visible radiation W/m^2/sr) the picture looks less
> bright.
>
> So I don't know which one is the right one to use in this case.
>
> I tried to find out if the default input when using pcond would be
> luminance rather than visible radiation, but couldn't find an answer for
> that, or maybe there is another command other than pcond, that takes the
> input in luminance values, then that would be the one I should use. ****
>
> Or maybe there is an additional step that I'm missing...  ** **
>
>
> I wonder if somebody can give me a hint about this, and/or where to
> look..  :)
>
> Thanks in advance!!
>
> Ch.****
>
> ____________________________________________________________
> Electronic mail messages entering and leaving Arup  business
> systems are scanned for acceptability of content and viruses
>
> _______________________________________________
> Radiance-general mailing list
> Radiance-general at radiance-online.org
> http://www.radiance-online.org/mailman/listinfo/radiance-general
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.radiance-online.org/pipermail/radiance-general/attachments/20130805/d99d0d31/attachment.html>