[Radiance-general] Composing multiple radiance images
Giovanni Betti
gbetti at fosterandpartners.com
Wed Apr 18 07:43:30 PDT 2012
Thanks a lot both Lars and Jack,
I thought it was something rather simple I was missing!
Using the unfiltered raw images just did the trick;
Thanks,
G
-----Original Message-----
From: Jack de Valpine [mailto:jedev at visarc.com]
Sent: 18 April 2012 14:12
To: Radiance general discussion
Subject: Re: [Radiance-general] Composing multiple radiance images
Hi Giovanni,
As Lars has pointed out, rad typically ends an image with a call to
pfilt, which WILL adjust the exposure either implicitly per image
(likely the source of your variations) or explicitly by
specifying what pfilt should do in your rif file.
-Jack
--
# Jack de Valpine
# president
#
# visarc incorporated
# http://www.visarc.com
#
# channeling technology for superior design and construction
On 4/18/2012 6:19 AM, Lars O. Grobe wrote:
> Hi Giovanni!
>> I am not performing any filtering but maybe there is something
happening
>> behind the scenes...
>> I simply set up a job generating 9 images using rad and then a simple
>> pcompos line to tile them together
>>
>> pcompos -a 3 test00*.pic> composite.pic
>>
>> is this offering more insights?
> rad will typically call pfilt
>
> 1) to filter down resolution (at any quality setting not equal to LOW)
> to achieve antialiasing as well as
> 2) to apply a useful exposure (at any quality setting).
>
> If you want to assemble the filtered images, you should set a common
> exposure value to all of them. See the manpage of rad, where the
> EXPOSURE variable is explained as well as how to find a suitable
value.
>
> You can also simply keep the unfiltered images as generated by rpict.
> You could then assemble the raw images and filter the complete,
> assembled mosaic. Tell rad to keep the unfiltered images by specifying
> a name pattern using the RAWFILE variable. Again, the details are
> explained in the manpage of rad.
>
> If you want to read numerical values from filtered images, usually the
> -o option are of help. This gives you access to the original pixel
> values by reversing the exposure mapping performed by e.g. pfilt. See
> e.g. the manpage of pvalue.
>
> Cheers, Lars.
>
> _______________________________________________
> Radiance-general mailing list
> Radiance-general at radiance-online.org
> http://www.radiance-online.org/mailman/listinfo/radiance-general
_______________________________________________
Radiance-general mailing list
Radiance-general at radiance-online.org
http://www.radiance-online.org/mailman/listinfo/radiance-general
More information about the Radiance-general
mailing list