[Radiance-general] Radiance installation on Mac OS X 10.5.6

[Greg Ward]

Hi David,

I suspect there is a problem with the rmake command you picked up with  
the OS X binaries.  Try removing "rmake" from your install location  
and rerunning "makeall install" to see if that fixes things.

-Greg

> From: David Appelfeld <d.appelfeld at gmail.com>
> Date: October 31, 2009 3:01:08 PM PDT
>
> Hi All,
>
> thank you Mark and Rob, it helps and I got further but I am still  
> not successful and after few hours with that I decided to write  
> another post.
>
> What I did so far.
>
> Install Xcode and downloaded radiance-HEAD.tgz, and  
> rad3R9supp.tar.gz. Then unpack them inside ray folder according to  
> the instructions on  http://www.radiance-online.org/software/ .
> Then place ray folder to usr/local/lib/ray and run sudo ./makeall  
> install.
>
> It started to install, but it ended again with message "There were  
> some errors."
>
> Here is part of the text from terminal with errors:
> ....
> lipo: can't open input file: /var/tmp//cc7tPgdL.out (No such file or  
> directory)
> make: *** [rpict] Error 1
> cc -I../common -L../lib -O2 -arch ppc -arch i386 -DBSD -DNOSTEREO - 
> Dfreebsd -I/usr/X11R6/include -L/usr/X11R6/lib -isysroot /Developer/ 
> SDKs/MacOSX10.4u.sdk -o ./rvu rvmain.o rview.o rv2.o rv3.o  
> devtable.o devcomm.o editline.o x11.o x11twind.o colortab.o ../lib/ 
> libradiance.a -lrtrad -lm -lX11
> ld: library not found for -lcrt1.10.5.o
> collect2: ld returned 1 exit status
> ld: library not found for -lcrt1.10.5.o
> collect2: ld returned 1 exit status
> lipo: can't open input file: /var/tmp//cczmztgf.out (No such file or  
> directory)
> make: *** [rvu] Error 1
> cc -I../common -L../lib -O2 -arch ppc -arch i386 -DBSD -DNOSTEREO - 
> Dfreebsd -I/usr/X11R6/include -L/usr/X11R6/lib -isysroot /Developer/ 
> SDKs/MacOSX10.4u.sdk -o ./lookamb lookamb.o ambio.o -lrtrad -lm
> ld: library not found for -lcrt1.10.5.o
> ld:collect2:  library notld returned 1 exit status
>  found for -lcrt1.10.5.o
> collect2: ld returned 1 exit status
> lipo: can't open input file: /var/tmp//ccXciAPr.out (No such file or  
> directory)
> make: *** [lookamb] Error 1
> ....
>
> I guess it is something with wrong path or environment, I am not sure.
> I also did as Mark suggested:
>
> >All you should need to do is set up your environment. If you are
> >using the bash shell (check with "env | grep SHELL") then add the
> >following lines to your ~/.bashrc file:
> >
> >export PATH=.:/usr/local/bin:${PATH}
> >export LD_LIBRARY_PATH=/usr/local/lib:${LD_LIBRARY_PATH}
> >export MANPATH=/usr/local/man:${MANPATH}
>
> >And then re-source that file with "source ~/.bashrc" and you
> >should be good to go. That's an effective installation path, as
> >far as I know.
>
>
> I wrote that to the end of file "bashrc" at /etc/bashrc. I was not  
> sure how to re-source that file so I just write "source ~/.bashrc"  
> to the beginning of file "profile" at /etc/profile, but this  
> probably dost not work.
>
>
> Thank you again
>
> David
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://radiance-online.org/pipermail/radiance-general/attachments/20091031/1cbe0b81/attachment.htm