[Radiance-general] Glaze.csh header and input format

[Jack de Valpine]

Hi Siritip,

Every element in the file should be separated by one tab only, do not 
use spaces. At the end of your last line (eg the "b" glazing) you should 
have a carriage return.

I just tested this and it should work fine.

-Jack

siritip at umich.edu wrote:
> Hi Jack,
>
>   Thank you so much for a prompt reply. Yes, I was using the header 
> that you posted in the thread. I checked the file in vi and it seems 
> to be ok. Here's what it looks like. (I use the data from glaze.csh in 
> this case.)
>
> Surface   Tr   Tg   Tb   Rcr   Rcg   Rcb   Rgr   Rgg   Rgb   Part
> a   0.862   .89   .886   .074   .077   .079   .074   .077   .079   0
> b   0.756   0.808   0.744   0.042   0.049   0.043   0.065   0.058   
> 0.067   0
>     I'm not sure if there is something wrong in the glazing input 
> lines. (I'm a novice in both Unix and Radiance :)
>
> Thank you very much.
> Siritip
>
>
> On 2/14/07, Jack de Valpine <jedev at visarc.com> wrote:
> Hi Siritip,
>
> If this is the header file that I posted awhile ago, I think it is ok,
> however you may need to add an end-of-line to the file.
>
> -Jack
>
> siritip at umich.edu wrote:
>> Dear Radiance Community,
>>
>>   I'm interested in simulating the glazing and I've checked previous
>> posts on modeling the glazing.
>>
>>   I was trying to use the glaze.csh with a separate glazing input file
>> and as I read from the thread, it seems that glaze.csh is very
>> sensitive to a spacing of the input header file. I used the header
>> that was posted from the thread but it still prompted me with 'bad
>> header'. So, I'm not sure whether it's the header or my input lines
>> that didn't work.
>>
>>   I was wondering if someone could share a file with correct spacing
>> of header along with sample input lines that would make glaze.csh run
>> without error? Thank you very much in advance.
>>
>> Siritip Harn.
>>
>> Ph.D. Pre-Candidate
>> Taubman College of Architecture and Urban Planning
>> University of Michigan
>>
>> siritip at umich.edu
>>
>>
>>
>>
>> _______________________________________________
>> Radiance-general mailing list
>> Radiance-general at radiance-online.org
>> http://www.radiance-online.org/mailman/listinfo/radiance-general
>>
>>
>
> -- 
> # Jack de Valpine
> # president
> #
> # visarc incorporated
> # http://www.visarc.com
> #
> # channeling technology for superior design and construction
>
>
>
> _______________________________________________
> Radiance-general mailing list
> Radiance-general at radiance-online.org
> http://www.radiance-online.org/mailman/listinfo/radiance-general
>
>
>
> _______________________________________________
> Radiance-general mailing list
> Radiance-general at radiance-online.org
> http://www.radiance-online.org/mailman/listinfo/radiance-general
>
>

-- 
# Jack de Valpine
# president
#
# visarc incorporated
# http://www.visarc.com
#
# channeling technology for superior design and construction