[Radiance-general] modifying TMY2 weather file in BIN format
Bourgeois, Denis
Denis.Bourgeois at nrc-cnrc.gc.ca
Sat May 27 13:15:32 CEST 2006
Venkata,
As DAYSIM weather files are based on Energy Plus weather files, you could just convert Energy Plus files directly into DOE-2/eQuest bin files using the eQ_WthProc executable from the DOE-2 web site:
http://doe2.com/index_Wth.html
Hope this helps,
Denis Bourgeois, Ph.D.
Boursier post-doctoral CRSNG / NSERC Visiting Fellow
Institut de recherche en construction / Institute for Research in Construction
Conseil national de recherches Canada / National Research Council Canada
denis.bourgeois at nrc-cnrc.gc.ca
-----Original Message-----
From: radiance-general-bounces at radiance-online.org on behalf of Ramana Koti
Sent: Sat 2006-05-27 01:59
To: Radiance general discussion
Subject: [Radiance-general] modifying TMY2 weather file in BIN format
Hello all,
I need to modify the direct normal and total horizontal solar values in the
BIN format TMY2 weather file used by DOE-2/eQUEST to ensure both DAYSIM and
DOE-2 provide the same exterior horizontal illuminance. Any pointers on how
this can be done or an alternative approach will be appreciated.
Regards,
Ramana.
--
Venkata Ramana Koti
MS in Building Design (Energy/Climate)
School of Architecture and Landscape Architecture
College of Design
Arizona State University, Tempe AZ 85287
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://radiance-online.org/pipermail/radiance-general/attachments/20060527/74f57e63/attachment.htm
More information about the Radiance-general
mailing list