[Radiance-general] OSX, Rad3R7P2, pmap 4.3.1

[Kirk Thibault]

So I recompiled pmap 4.3.1 on Mac OSX 10.4.5 with Radiance 3R7P2.   
When I ran one of the "eggsamples" :-) included with pmap (the "ring"  
example) I get the following output:

**********
[Kirk-Thibaults-Computer:~/Desktop/eggsamples/ring] kirkt% ./render.sh
Integrating flux from source s (60000 partitions)...
PREPASS on source s (60000 partitions)...
1 emitted, 0 global, 0 caustic, 0.01% after 0.000u 0.000s 0.000r  
hours on Kirk-Thibaults-Computer.local
MAIN PASS on source s (60000 partitions)...
1833515 emitted, 1264 global, 614 caustic, 17.99% after 0.003u 0.000s  
0.003r hours on Kirk-Thibaults-Computer.local
3280870 emitted, 2082 global, 616 caustic, 32.19% after 0.006u 0.000s  
0.006r hours on Kirk-Thibaults-Computer.local
4270840 emitted, 12930 global, 118889 caustic, 41.90% after 0.008u  
0.000s 0.008r hours on Kirk-Thibaults-Computer.local
5232619 emitted, 25509 global, 245706 caustic, 51.34% after 0.011u  
0.000s 0.011r hours on Kirk-Thibaults-Computer.local
6127496 emitted, 41824 global, 429003 caustic, 60.11% after 0.014u  
0.000s 0.014r hours on Kirk-Thibaults-Computer.local
7365147 emitted, 46838 global, 501094 caustic, 72.26% after 0.017u  
0.000s 0.017r hours on Kirk-Thibaults-Computer.local
9160226 emitted, 46838 global, 501094 caustic, 89.87% after 0.019u  
0.000s 0.019r hours on Kirk-Thibaults-Computer.local

Building global photon heap...
Precomputing irradiance for 11709 global photons...
Rebuilding global photon heap...

Building caustic photon heap...
Saving ring.gpm (11709 photons)...
Saving ring.cpm (501094 photons)...
rpict: fatal - command line error at '-app'
rpict: 0 rays, 0.00% after 0.000u 0.000s 0.000r hours on Kirk- 
Thibaults-Computer.local
rpict: fatal - command line error at '-app'
rpict: 0 rays, 0.00% after 0.000u 0.000s 0.000r hours on Kirk- 
Thibaults-Computer.local
rpict: fatal - command line error at '-app'
rpict: 0 rays, 0.00% after 0.000u 0.000s 0.000r hours on Kirk- 
Thibaults-Computer.local
************

It appears that mkpmap runs, but rpict is not happy.  I also ran the  
example script in the pmap "test" folder and got a similar fatal  
failure, this time at the "-apd" option on the rpict command line.

So, what seems to be the problem?  is pmap not playing nice with  
Radiance upon recompile?  Any other OSX users compile pmap?  I am on  
PowerPC architecture, not Intel.

Hmmm.


Thanks folks!

kirk