[Radiance-general] One (or more) window behind another
Greg Ward
gregoryjward at gmail.com
Sat Jan 22 02:46:59 CET 2005
Hi Malcolm,
In general, you can arrange your input surfaces for mkillum any way you
think will benefit your calculation. You don't have to worry about
what happens when one window sees another, but if you want to know what
happens in such cases, check out section 13.1.3 in "Rendering with
Radiance" starting on page 572.
If you still have questions, maybe you could be a little more specific
about your concerns.
-Greg
> From: "Malcolm Macpherson" <mm at waterslade.com>
> Date: January 21, 2005 9:12:39 AM PST
>
Hi,
I am calculating Average Daylight Factors by sampling the illuminance
on a grid within the room.
I frequently come across situations where there are two completely
separate layers of glazing serving a room. One example is for a room
looking into an atrium with a glazed roof. There is one layer of
glazing in the window in the room, and a second in the roof. I am not
sure how best to treat this. Normally I would use mkillum on the room
glazing, and allow daylight to penetrate through the atrium roof. Does
anyone know if there is possibly a 2 stage procedure so that the atrium
roof is treated as a secondary source as well as the room window?
Another example, this time with 3 layers of separate glazing, is
where there is a corridor between the room in the above example and the
glazed atrium, and the corridor has windows looking into the atrium.
I would be glad of anyone's thoughts on this.
Malcolm
More information about the Radiance-general
mailing list