[Radiance-general] Radiance on bootable CDROM using Linux

[Terrance Mc Minn]

Gurnett wrote
>i explored ur radiance on bootable CDROM , everthing was fine except, mouse
was not working , could u help me on how to configure mouse. Gurneet

To configure the mouse with X windows, you need to determine the manner in
which the mouse is connected to the computer. See also pages 53 and 59 of
the study guide:
i) USB mouse, use the /dev/input/mice
ii) The PS/2 mouse has a small round 6- pin DIN connector. Use /dev/psaux
iii) A serial mouse has a 9 or 25 pin connector and can be connected on com
port 1. Use /dev/ttyS0
iv) A serial mouse has either a 9 or 25 pin connector and can be connected
on com port 2. Use /dev/ttyS1

Hint: If the rest of your X configuration is working, you can modify the
setup via xreset's 'Complex - text mode' scripts from the console. See from
page 65 onwards in the study guide.

Regards 

Terry Mc Minn 
Faculty of Built Environment, Art and Design 
Curtin University of Technology 
GPO Box U 1987 
Perth 6845 
Western Australia 
Email: T.Mcminn@curtin.edu.au 
CRICOS Provider Code: 00301J