src/hd/rhdobj.h

/* RCSid: $Id: rhdobj.h,v 3.6 2003/02/22 02:07:24 greg Exp $ */
/*
 * Header file for object display routines for rholo drivers.
 */
#ifndef _RAD_RHDOBJ_H_
#define _RAD_RHDOBJ_H_

#ifdef __cplusplus
extern "C" {
#endif

                                /* additional user commands */
#define DO_LOAD         0               /* load octree object */
#define DO_UNLOAD       1               /* unload (free) octree object */
#define DO_XFORM        2               /* set/print object transform */
#define DO_MOVE         3               /* add to object transform */
#define DO_UNMOVE       4               /* undo last transform change */
#define DO_DUP          5               /* duplicate object */
#define DO_SHOW         6               /* show object (low quality) */
#define DO_LIGHT        7               /* illuminate object (high quality) */
#define DO_HIDE         8               /* hide object */
#define DO_OBJECT       9               /* print object statistics */

#define DO_NCMDS        10              /* number of object display commands */

                                        /* commands entered on stdin only */
#define DO_INIT         {"load","clear","xform","move","unmove","dup",\
                                "show","light","hide","object"}

/*******************************************************************
 * The following routines are available for calling from the driver:

int
(*dobj_lightsamp)(c, p, v)      : apply next sample for local light sources
COLR    c;                      : pixel color (RGBE)
FVECT   p;                      : world intersection point
FVECT   v;                      : ray direction vector

If the pointer to the function dobj_lightsamp is non-NULL, then the
dev_value() driver routine should call this rather than use a
given sample in its own data structures.  This pointer is set
in the dobj_lighting() function described below, which may be
called indirectly by the dobj_command() function.


int
dobj_command(cmd, args)         : check/run object display command
char    *cmd, *args;            : command name and argument string

Check to see if this is an object display command, and return -1 if
it isn't.  If it is a valid command that results in some visible
change, return non-zero, otherwise return 0.  Error messages should
be printed with error(COMMAND,err).


double
dobj_trace(nm, rorg, rdir)      : check for ray intersection with objects
char    nm[];                   : object name (modified)
FVECT   rorg, rdir;             : ray origin and direction

Check to see if the given ray intersects the given object,
returning the distance the ray traveled if it did, or FHUGE if it didn't.
If nm contains "*", then all visible objects are checked and the name
of the intersected object is returned, or "" if none.  If nm is NULL,
then all visible objects are checked, but the name is not returned.


int
dobj_render()                   : render visible objects to OpenGL

Renders all display objects using OpenGL, assuming desired view has
been set.  This routine also assumes that the tone-mapping library
is being used to set exposure, and it queries this information to
adjust light sources as necessary for illuminated objects.  Returns
the number of objects rendered.


void
dobj_cleanup()                  : clean up data structures

Frees all allocated data structures and objects.


++++ The following routines are usually called through dobj_command() ++++


int
dobj_load(oct, nam)             : create/load an octree object
char    *oct, *nam;             : octree and object name

Load an octree for rendering as a local object, giving it the indicated name.
Returns 1 on success, 0 on failure (with COMMAND error message).


int
dobj_unload(nam)                : free the named object
char    *nam;                   : object name

Free all memory associated with the named object.
Returns 1 on success, 0 on failure (with COMMAND error message).


int
dobj_xform(nam, add, ac, av)    : set/add transform for nam
char    *nam;                   : object name
int     add;                    : add to transform or create new one?
int     ac;                     : transform argument count
char    *av[];                  : transform arguments

Set or add to the transform for the named object.
Returns 1 on success, 0 on failure (with COMMAND error message).


int
dobj_unmove()                   : undo last transform change

Undo the last transform change.
Returns 1 on success, 0 on failure (with COMMAND error message).


int
dobj_dup(oldnm, nam)            : duplicate object oldnm as nam
char    *oldnm, *nam;

Duplicate the named object and give the copy a new name.
Returns 1 on success, 0 on failure (with COMMAND error message).


int
dobj_lighting(nam, cn)          : set up lighting for display object
char    *nam;                   : object name
int     cn;                     : new drawing code

Set the lighting of the named object to DO_SHOW, DO_HIDE or DO_LIGHT.
Change lighting of all objects if nam is "*".
Returns 1 on success, 0 on failure (with COMMAND error message).


int
dobj_putstats(nam, fp)          : print object statistics
char    *nam;                   : object name
FILE    *fp;                    : output file

Print current position, size and transform for the named object,
or all objects if nam is "*".
Returns 1 on success, 0 on failure (with COMMAND error message).


 ******************************************************************/


extern double   dobj_trace();

extern char     rhdcmd[DO_NCMDS][8];

extern int      (*dobj_lightsamp)();    /* pointer to function to get lights */

#ifdef __cplusplus
}
#endif
#endif /* _RAD_RHDOBJ_H_ */

Revision:	3.7
Committed:	Mon Jul 14 22:24:00 2003 UTC (20 years, 9 months ago) by schorsch
Content type:	text/plain
Branch:	MAIN
Changes since 3.6:	+13 -1 lines
Log Message:	Instrumented headers against multiple inclusion and for use from C++. Moved includes in headers out of "C" scope.
#	User	Rev	Content
1	schorsch	3.7	/* RCSid: $Id: rhdobj.h,v 3.6 2003/02/22 02:07:24 greg Exp $ */
2	gwlarson	3.1	/*
3			* Header file for object display routines for rholo drivers.
4			*/
5	schorsch	3.7	#ifndef _RAD_RHDOBJ_H_
6			#define _RAD_RHDOBJ_H_
7
8			#ifdef __cplusplus
9			extern "C" {
10			#endif
11	gwlarson	3.1
12			/* additional user commands */
13			#define DO_LOAD 0 /* load octree object */
14			#define DO_UNLOAD 1 /* unload (free) octree object */
15			#define DO_XFORM 2 /* set/print object transform */
16			#define DO_MOVE 3 /* add to object transform */
17			#define DO_UNMOVE 4 /* undo last transform change */
18			#define DO_DUP 5 /* duplicate object */
19			#define DO_SHOW 6 /* show object (low quality) */
20			#define DO_LIGHT 7 /* illuminate object (high quality) */
21			#define DO_HIDE 8 /* hide object */
22			#define DO_OBJECT 9 /* print object statistics */
23
24			#define DO_NCMDS 10 /* number of object display commands */
25
26			/* commands entered on stdin only */
27	gwlarson	3.3	#define DO_INIT {"load","clear","xform","move","unmove","dup",\
28	gwlarson	3.1	"show","light","hide","object"}
29
30			/*******************************************************************
31			* The following routines are available for calling from the driver:
32
33			int
34			(*dobj_lightsamp)(c, p, v) : apply next sample for local light sources
35			COLR c; : pixel color (RGBE)
36			FVECT p; : world intersection point
37			FVECT v; : ray direction vector
38
39			If the pointer to the function dobj_lightsamp is non-NULL, then the
40			dev_value() driver routine should call this rather than use a
41			given sample in its own data structures. This pointer is set
42			in the dobj_lighting() function described below, which may be
43			called indirectly by the dobj_command() function.
44
45
46			int
47			dobj_command(cmd, args) : check/run object display command
48			char cmd, args; : command name and argument string
49
50	gwlarson	3.5	Check to see if this is an object display command, and return -1 if
51			it isn't. If it is a valid command that results in some visible
52			change, return non-zero, otherwise return 0. Error messages should
53	gwlarson	3.1	be printed with error(COMMAND,err).
54
55
56			double
57	gwlarson	3.2	dobj_trace(nm, rorg, rdir) : check for ray intersection with objects
58			char nm[]; : object name (modified)
59	gwlarson	3.1	FVECT rorg, rdir; : ray origin and direction
60
61	gwlarson	3.2	Check to see if the given ray intersects the given object,
62	gwlarson	3.1	returning the distance the ray traveled if it did, or FHUGE if it didn't.
63	gwlarson	3.2	If nm contains "*", then all visible objects are checked and the name
64			of the intersected object is returned, or "" if none. If nm is NULL,
65			then all visible objects are checked, but the name is not returned.
66	gwlarson	3.1
67
68	gwlarson	3.4	int
69	gwlarson	3.1	dobj_render() : render visible objects to OpenGL
70
71			Renders all display objects using OpenGL, assuming desired view has
72			been set. This routine also assumes that the tone-mapping library
73			is being used to set exposure, and it queries this information to
74	gwlarson	3.4	adjust light sources as necessary for illuminated objects. Returns
75			the number of objects rendered.
76	gwlarson	3.1
77
78			void
79			dobj_cleanup() : clean up data structures
80
81			Frees all allocated data structures and objects.
82
83
84			++++ The following routines are usually called through dobj_command() ++++
85
86
87			int
88			dobj_load(oct, nam) : create/load an octree object
89			char oct, nam; : octree and object name
90
91			Load an octree for rendering as a local object, giving it the indicated name.
92			Returns 1 on success, 0 on failure (with COMMAND error message).
93
94
95			int
96			dobj_unload(nam) : free the named object
97			char *nam; : object name
98
99			Free all memory associated with the named object.
100			Returns 1 on success, 0 on failure (with COMMAND error message).
101
102
103			int
104			dobj_xform(nam, add, ac, av) : set/add transform for nam
105			char *nam; : object name
106			int add; : add to transform or create new one?
107			int ac; : transform argument count
108			char *av[]; : transform arguments
109
110			Set or add to the transform for the named object.
111			Returns 1 on success, 0 on failure (with COMMAND error message).
112
113
114			int
115			dobj_unmove() : undo last transform change
116
117			Undo the last transform change.
118			Returns 1 on success, 0 on failure (with COMMAND error message).
119
120
121			int
122			dobj_dup(oldnm, nam) : duplicate object oldnm as nam
123			char oldnm, nam;
124
125			Duplicate the named object and give the copy a new name.
126			Returns 1 on success, 0 on failure (with COMMAND error message).
127
128
129			int
130			dobj_lighting(nam, cn) : set up lighting for display object
131			char *nam; : object name
132			int cn; : new drawing code
133
134			Set the lighting of the named object to DO_SHOW, DO_HIDE or DO_LIGHT.
135			Change lighting of all objects if nam is "*".
136			Returns 1 on success, 0 on failure (with COMMAND error message).
137
138
139			int
140			dobj_putstats(nam, fp) : print object statistics
141			char *nam; : object name
142			FILE *fp; : output file
143
144			Print current position, size and transform for the named object,
145			or all objects if nam is "*".
146			Returns 1 on success, 0 on failure (with COMMAND error message).
147
148
149			******************************************************************/
150
151
152			extern double dobj_trace();
153
154			extern char rhdcmd[DO_NCMDS][8];
155
156			extern int (dobj_lightsamp)(); / pointer to function to get lights */
157	schorsch	3.7
158			#ifdef __cplusplus
159			}
160			#endif
161			#endif /* _RAD_RHDOBJ_H_ */
162