| 1 |
#!/bin/csh -f |
| 2 |
# RCSid: $Id: glaze.csh,v 2.3 2004/08/14 19:36:38 greg Exp $ |
| 3 |
# |
| 4 |
# Complex glazing model (goes with glaze1.cal and glaze2.cal) |
| 5 |
# |
| 6 |
# Oct. 2002 Greg Ward |
| 7 |
# Aug. 2004 GW (added -f option to read glazings from file) |
| 8 |
# Funding for this development generously provided by Visarc, Inc. |
| 9 |
# (http://www.visarc.com) |
| 10 |
# |
| 11 |
|
| 12 |
################################################################# |
| 13 |
# |
| 14 |
# Supported surface types: |
| 15 |
# |
| 16 |
set sn_arr=("clear glass" "VE1-2M low-E coating" "PVB laminated" "V-175 white frit" "V-933 warm gray frit") |
| 17 |
# Glass-side hemispherical reflectances for each surface type: |
| 18 |
set rg_r_arr=(0.074 0.065 .11 0.33 0.15) |
| 19 |
set rg_g_arr=(0.077 0.058 .11 0.33 0.15) |
| 20 |
set rg_b_arr=(0.079 0.067 .11 0.33 0.15) |
| 21 |
# Coating-side hemispherical reflectance for each surface type: |
| 22 |
set rc_r_arr=(0.074 0.042 .11 0.59 0.21) |
| 23 |
set rc_g_arr=(0.077 0.049 .11 0.59 0.21) |
| 24 |
set rc_b_arr=(0.079 0.043 .11 0.59 0.21) |
| 25 |
# Hemispherical (normal) transmittance for each surface type: |
| 26 |
set tn_r_arr=(0.862 0.756 0.63 0.21 0.09) |
| 27 |
set tn_g_arr=(0.890 0.808 0.63 0.21 0.09) |
| 28 |
set tn_b_arr=(0.886 0.744 0.63 0.21 0.09) |
| 29 |
# Boolean whether coatings can have partial coverage: |
| 30 |
set part_arr=(0 0 0 1 1) |
| 31 |
|
| 32 |
while ($#argv > 0) |
| 33 |
set header="Surface Tr Tg Tb Rcr Rcg Rcb Rgr Rgg Rgb Part" |
| 34 |
if ($#argv < 2 || "$argv[1]" != '-f') then |
| 35 |
echo "Usage: $0 [-f glazing.dat ..]" |
| 36 |
exit 1 |
| 37 |
endif |
| 38 |
shift argv |
| 39 |
set gf="$argv[1]" |
| 40 |
shift argv |
| 41 |
if ("`sed -n 1p $gf:q`" != "$header") then |
| 42 |
echo "Bad header in $gf -- Expected: $header" |
| 43 |
exit 1 |
| 44 |
endif |
| 45 |
echo "Adding glazing types from file $gf :" |
| 46 |
set nl=`wc -l < $gf:q` |
| 47 |
@ i=2 |
| 48 |
while ($i <= $nl) |
| 49 |
set ln=(`sed -n ${i}p $gf:q`) |
| 50 |
if ($#ln != 11) then |
| 51 |
echo "Expected 11 words in line: $ln" |
| 52 |
exit 1 |
| 53 |
endif |
| 54 |
echo $ln[1] |
| 55 |
set sn_arr=($sn_arr:q $ln[1]) |
| 56 |
set tn_r_arr=($tn_r_arr $ln[2]) |
| 57 |
set tn_g_arr=($tn_g_arr $ln[3]) |
| 58 |
set tn_b_arr=($tn_b_arr $ln[4]) |
| 59 |
set rc_r_arr=($rc_r_arr $ln[5]) |
| 60 |
set rc_g_arr=($rc_g_arr $ln[6]) |
| 61 |
set rc_b_arr=($rc_b_arr $ln[7]) |
| 62 |
set rg_r_arr=($rc_r_arr $ln[8]) |
| 63 |
set rg_g_arr=($rc_g_arr $ln[9]) |
| 64 |
set rg_b_arr=($rc_b_arr $ln[10]) |
| 65 |
set part_arr=($part_arr $ln[11]) |
| 66 |
@ i++ |
| 67 |
end |
| 68 |
end |
| 69 |
|
| 70 |
################################################################# |
| 71 |
# |
| 72 |
# Get user input |
| 73 |
# |
| 74 |
echo -n "Enter the number of panes in the system: " |
| 75 |
set np="$<" |
| 76 |
if ($np != 1 && $np != 2) then |
| 77 |
echo "Must be 1 or 2 pane system" |
| 78 |
exit 1 |
| 79 |
endif |
| 80 |
echo "" |
| 81 |
echo "Window normal faces interior" |
| 82 |
echo "" |
| 83 |
if ($np == 1) then |
| 84 |
echo " | |" |
| 85 |
echo " | |" |
| 86 |
echo " | |" |
| 87 |
echo " | |-->" |
| 88 |
echo " | |" |
| 89 |
echo " | |" |
| 90 |
echo " | |" |
| 91 |
echo " s1 s2" |
| 92 |
else |
| 93 |
echo " | | | |" |
| 94 |
echo " | | | |" |
| 95 |
echo " | | | |" |
| 96 |
echo " | | | |-->" |
| 97 |
echo " | | | |" |
| 98 |
echo " | | | |" |
| 99 |
echo " | | | |" |
| 100 |
echo " s1 s2 s3 s4" |
| 101 |
endif |
| 102 |
echo "" |
| 103 |
echo "Supported surface types are:" |
| 104 |
set i=1 |
| 105 |
while ($i <= $#sn_arr) |
| 106 |
echo " " $i - $sn_arr[$i] |
| 107 |
@ i++ |
| 108 |
end |
| 109 |
echo "" |
| 110 |
echo -n "What is the type of s1? " |
| 111 |
set s1t="$<" |
| 112 |
echo -n "What is the type of s2? " |
| 113 |
set s2t="$<" |
| 114 |
if ($s1t != 1 && $s2t != 1) then |
| 115 |
echo "One surface of each pane must be $sn_arr[1]" |
| 116 |
exit 1 |
| 117 |
endif |
| 118 |
if ($part_arr[$s1t]) then |
| 119 |
echo -n "Enter fraction coverage for s1 (0-1): " |
| 120 |
set s1c="$<" |
| 121 |
endif |
| 122 |
if ($part_arr[$s2t]) then |
| 123 |
echo -n "Enter fraction coverage for s2 (0-1): " |
| 124 |
set s2c="$<" |
| 125 |
endif |
| 126 |
if ($np == 2) then |
| 127 |
echo -n "What is the type of s3? " |
| 128 |
set s3t="$<" |
| 129 |
echo -n "What is the type of s4? " |
| 130 |
set s4t="$<" |
| 131 |
if ($s3t != 1 && $s4t != 1) then |
| 132 |
echo "One surface of each pane must be $sn_arr[1]" |
| 133 |
exit 1 |
| 134 |
endif |
| 135 |
if ($part_arr[$s3t]) then |
| 136 |
echo -n "Enter fraction coverage for s3 (0-1): " |
| 137 |
set s3c="$<" |
| 138 |
endif |
| 139 |
if ($part_arr[$s4t]) then |
| 140 |
echo -n "Enter fraction coverage for s4 (0-1): " |
| 141 |
set s4c="$<" |
| 142 |
endif |
| 143 |
endif |
| 144 |
|
| 145 |
################################################################# |
| 146 |
# |
| 147 |
# Begin material comments |
| 148 |
# |
| 149 |
echo "" |
| 150 |
echo "############################################" |
| 151 |
echo "# Glazing produced by Radiance glaze script" |
| 152 |
echo "# `date`" |
| 153 |
echo "# Material surface normal points to interior" |
| 154 |
echo "# Number of panes in system: $np" |
| 155 |
|
| 156 |
if ($np == 2) goto glaze2 |
| 157 |
################################################################# |
| 158 |
# |
| 159 |
# Compute single glazing |
| 160 |
# |
| 161 |
set sc=1 |
| 162 |
echo "# Exterior surface s1 type: $sn_arr[$s1t]" |
| 163 |
if ($?s1c) then |
| 164 |
echo "# s1 coating coverage: $s1c" |
| 165 |
set sc=$s1c |
| 166 |
endif |
| 167 |
echo "# Interior surface s2 type: $sn_arr[$s2t]" |
| 168 |
if ($?s2c) then |
| 169 |
echo "# s2 coating coverage: $s2c" |
| 170 |
set sc=$s2c |
| 171 |
endif |
| 172 |
if ($s1t != 1) then |
| 173 |
set ct=$s1t |
| 174 |
echo -n "# Exterior normal hemispherical reflectance: " |
| 175 |
ev ".265*($sc*$rc_r_arr[$ct]+(1-$sc)*$rc_r_arr[1])+.670*($sc*$rc_g_arr[$ct]+(1-$sc)*$rc_g_arr[1])+.065*($sc*$rc_b_arr[$ct]+(1-$sc)*$rc_b_arr[1])" |
| 176 |
echo -n "# Interior normal hemispherical reflectance: " |
| 177 |
ev ".265*($sc*$rg_r_arr[$ct]+(1-$sc)*$rg_r_arr[1])+.670*($sc*$rg_g_arr[$ct]+(1-$sc)*$rg_g_arr[1])+.065*($sc*$rg_b_arr[$ct]+(1-$sc)*$rg_b_arr[1])" |
| 178 |
else |
| 179 |
set ct=$s2t |
| 180 |
echo -n "# Exterior normal hemispherical reflectance: " |
| 181 |
ev ".265*($sc*$rg_r_arr[$ct]+(1-$sc)*$rg_r_arr[1])+.670*($sc*$rg_g_arr[$ct]+(1-$sc)*$rg_g_arr[1])+.065*($sc*$rg_b_arr[$ct]+(1-$sc)*$rg_b_arr[1])" |
| 182 |
echo -n "# Interior normal hemispherical reflectance: " |
| 183 |
ev ".265*($sc*$rc_r_arr[$ct]+(1-$sc)*$rc_r_arr[1])+.670*($sc*$rc_g_arr[$ct]+(1-$sc)*$rc_g_arr[1])+.065*($sc*$rc_b_arr[$ct]+(1-$sc)*$rc_b_arr[1])" |
| 184 |
endif |
| 185 |
echo -n "# Normal hemispherical transmittance: " |
| 186 |
ev ".265*($sc*$tn_r_arr[$ct]+(1-$sc)*$tn_r_arr[1])+.670*($sc*$tn_g_arr[$ct]+(1-$sc)*$tn_g_arr[1])+.065*($sc*$tn_b_arr[$ct]+(1-$sc)*$tn_b_arr[1])" |
| 187 |
echo "#" |
| 188 |
echo "void BRTDfunc glaze1_unnamed" |
| 189 |
if ($part_arr[$s1t] || $part_arr[$s2t]) then |
| 190 |
### Frit glazing |
| 191 |
echo "10" |
| 192 |
echo " sr_frit_r sr_frit_g sr_frit_b" |
| 193 |
echo " st_frit_r st_frit_g st_frit_b" |
| 194 |
echo " 0 0 0" |
| 195 |
echo " glaze1.cal" |
| 196 |
echo "0" |
| 197 |
echo "11" |
| 198 |
if ($s2t == 1) then |
| 199 |
ev "$s1c*($rg_r_arr[$s1t]-$rg_r_arr[1])" \ |
| 200 |
"$s1c*($rg_g_arr[$s1t]-$rg_g_arr[1])" \ |
| 201 |
"$s1c*($rg_b_arr[$s1t]-$rg_b_arr[1])" |
| 202 |
ev "$s1c*$rc_r_arr[$s1t]" "$s1c*$rc_g_arr[$s1t]" "$s1c*$rc_b_arr[$s1t]" |
| 203 |
ev "$s1c*$tn_r_arr[$s1t]" "$s1c*$tn_g_arr[$s1t]" "$s1c*$tn_b_arr[$s1t]" |
| 204 |
echo " 1 $s1c" |
| 205 |
else |
| 206 |
ev "$s2c*$rc_r_arr[$s2t]" "$s2c*$rc_g_arr[$s2t]" "$s2c*$rc_b_arr[$s2t]" |
| 207 |
ev "$s2c*($rg_r_arr[$s2t]-$rg_r_arr[1])" \ |
| 208 |
"$s2c*($rg_g_arr[$s2t]-$rg_g_arr[1])" \ |
| 209 |
"$s2c*($rg_b_arr[$s2t]-$rg_b_arr[1])" |
| 210 |
ev "$s2c*$tn_r_arr[$s2t]" "$s2c*$tn_g_arr[$s2t]" "$s2c*$tn_b_arr[$s2t]" |
| 211 |
echo " -1 $s2c" |
| 212 |
endif |
| 213 |
else |
| 214 |
### Low-E glazing |
| 215 |
echo "10" |
| 216 |
echo " sr_lowE_r sr_lowE_g sr_lowE_b" |
| 217 |
echo " st_lowE_r st_lowE_g st_lowE_b" |
| 218 |
echo " 0 0 0" |
| 219 |
echo " glaze1.cal" |
| 220 |
echo "0" |
| 221 |
echo "19" |
| 222 |
echo " 0 0 0" |
| 223 |
echo " 0 0 0" |
| 224 |
echo " 0 0 0" |
| 225 |
if ($s2t == 1) then |
| 226 |
echo " 1" |
| 227 |
set st=$s1t |
| 228 |
else |
| 229 |
echo " -1" |
| 230 |
set st=$s2t |
| 231 |
endif |
| 232 |
echo " $rg_r_arr[$st] $rg_g_arr[$st] $rg_b_arr[$st]" |
| 233 |
echo " $rc_r_arr[$st] $rc_g_arr[$st] $rc_b_arr[$st]" |
| 234 |
echo " $tn_r_arr[$st] $tn_g_arr[$st] $tn_b_arr[$st]" |
| 235 |
endif |
| 236 |
echo "" |
| 237 |
exit 0 |
| 238 |
|
| 239 |
glaze2: |
| 240 |
################################################################# |
| 241 |
# |
| 242 |
# Compute double glazing |
| 243 |
# |
| 244 |
if ($s2t != 1) then |
| 245 |
set s2r_rgb=($rc_r_arr[$s2t] $rc_g_arr[$s2t] $rc_b_arr[$s2t]) |
| 246 |
set s1r_rgb=($rg_r_arr[$s2t] $rg_g_arr[$s2t] $rg_b_arr[$s2t]) |
| 247 |
set s12t_rgb=($tn_r_arr[$s2t] $tn_g_arr[$s2t] $tn_b_arr[$s2t]) |
| 248 |
else |
| 249 |
set s2r_rgb=($rg_r_arr[$s1t] $rg_g_arr[$s1t] $rg_b_arr[$s1t]) |
| 250 |
set s1r_rgb=($rc_r_arr[$s1t] $rc_g_arr[$s1t] $rc_b_arr[$s1t]) |
| 251 |
set s12t_rgb=($tn_r_arr[$s1t] $tn_g_arr[$s1t] $tn_b_arr[$s1t]) |
| 252 |
endif |
| 253 |
if ($s4t != 1) then |
| 254 |
set s4r_rgb=($rc_r_arr[$s4t] $rc_g_arr[$s4t] $rc_b_arr[$s4t]) |
| 255 |
set s3r_rgb=($rg_r_arr[$s4t] $rg_g_arr[$s4t] $rg_b_arr[$s4t]) |
| 256 |
set s34t_rgb=($tn_r_arr[$s4t] $tn_g_arr[$s4t] $tn_b_arr[$s4t]) |
| 257 |
else |
| 258 |
set s4r_rgb=($rg_r_arr[$s3t] $rg_g_arr[$s3t] $rg_b_arr[$s3t]) |
| 259 |
set s3r_rgb=($rc_r_arr[$s3t] $rc_g_arr[$s3t] $rc_b_arr[$s3t]) |
| 260 |
set s34t_rgb=($tn_r_arr[$s3t] $tn_g_arr[$s3t] $tn_b_arr[$s3t]) |
| 261 |
endif |
| 262 |
set s12c=1 |
| 263 |
echo "# Exterior surface s1 type: $sn_arr[$s1t]" |
| 264 |
if ($?s1c) then |
| 265 |
echo "# s1 coating coverage: $s1c" |
| 266 |
set s12c=$s1c |
| 267 |
endif |
| 268 |
echo "# Inner surface s2 type: $sn_arr[$s2t]" |
| 269 |
if ($?s2c) then |
| 270 |
echo "# s2 coating coverage: $s2c" |
| 271 |
set s12c=$s2c |
| 272 |
endif |
| 273 |
set s34c=1 |
| 274 |
echo "# Inner surface s3 type: $sn_arr[$s3t]" |
| 275 |
if ($?s3c) then |
| 276 |
echo "# s3 coating coverage: $s3c" |
| 277 |
set s34c=$s3c |
| 278 |
endif |
| 279 |
echo "# Interior surface s4 type: $sn_arr[$s4t]" |
| 280 |
if ($?s4c) then |
| 281 |
echo "# s4 coating coverage: $s4c" |
| 282 |
set s34c=$s4c |
| 283 |
endif |
| 284 |
# Approximate reflectance and transmittance for comment using gray values |
| 285 |
set rglass=`ev ".265*$rg_r_arr[1]+.670*$rg_g_arr[1]+.065*$rg_b_arr[1]"` |
| 286 |
set tglass=`ev ".265*$tn_r_arr[1]+.670*$tn_g_arr[1]+.065*$tn_b_arr[1]"` |
| 287 |
set s1r_gry=`ev "$s12c*(.265*$s1r_rgb[1]+.670*$s1r_rgb[2]+.065*$s1r_rgb[3])+(1-$s12c)*$rglass"` |
| 288 |
set s2r_gry=`ev "$s12c*(.265*$s2r_rgb[1]+.670*$s2r_rgb[2]+.065*$s2r_rgb[3])+(1-$s12c)*$rglass"` |
| 289 |
set s12t_gry=`ev "$s12c*(.265*$s12t_rgb[1]+.670*$s12t_rgb[2]+.065*$s12t_rgb[3])+(1-$s12c)*$tglass"` |
| 290 |
set s3r_gry=`ev "$s34c*(.265*$s3r_rgb[1]+.670*$s3r_rgb[2]+.065*$s3r_rgb[3])+(1-$s34c)*$rglass"` |
| 291 |
set s4r_gry=`ev "$s34c*(.265*$s4r_rgb[1]+.670*$s4r_rgb[2]+.065*$s4r_rgb[3])+(1-$s34c)*$rglass"` |
| 292 |
set s34t_gry=`ev "$s34c*(.265*$s34t_rgb[1]+.670*$s34t_rgb[2]+.065*$s34t_rgb[3])+(1-$s34c)*$tglass"` |
| 293 |
echo -n "# Exterior normal hemispherical reflectance: " |
| 294 |
ev "$s1r_gry + $s12t_gry^2*$s3r_gry" |
| 295 |
echo -n "# Interior normal hemispherical reflectance: " |
| 296 |
ev "$s4r_gry + $s34t_gry^2*$s2r_gry" |
| 297 |
echo -n "# Normal hemispherical transmittance: " |
| 298 |
ev "$s12t_gry*$s34t_gry" |
| 299 |
echo "#" |
| 300 |
echo "void BRTDfunc glaze2_unnamed" |
| 301 |
|
| 302 |
if ($part_arr[$s3t] || $part_arr[$s4t]) then |
| 303 |
### Front pane has frit |
| 304 |
if ($part_arr[$s1t] || $part_arr[$s2t]) then |
| 305 |
echo "Only one pane can have frit" |
| 306 |
exit 1 |
| 307 |
endif |
| 308 |
if ($?s3c) then |
| 309 |
set sc=$s3c |
| 310 |
set s3g=`ev "1-$s3c"` |
| 311 |
else |
| 312 |
set s3c=0 |
| 313 |
set s3g=1 |
| 314 |
endif |
| 315 |
if ($?s4c) then |
| 316 |
set sc=$s4c |
| 317 |
set s4g=`ev "1-$s4c"` |
| 318 |
else |
| 319 |
set s4c=0 |
| 320 |
set s4g=1 |
| 321 |
endif |
| 322 |
echo "10" |
| 323 |
echo "if(Rdot,cr($s4g*rclr,$s3g*$s4g*tclr,fr($s2r_rgb[1])),cr(fr($s1r_rgb[1]),ft($s12t_rgb[1]),$s3g*rclr))" |
| 324 |
echo "if(Rdot,cr($s4g*rclr,$s3g*$s4g*tclr,fr($s2r_rgb[2])),cr(fr($s1r_rgb[2]),ft($s12t_rgb[2]),$s3g*rclr))" |
| 325 |
echo "if(Rdot,cr($s4g*rclr,$s3g*$s4g*tclr,fr($s2r_rgb[3])),cr(fr($s1r_rgb[3]),ft($s12t_rgb[3]),$s3g*rclr))" |
| 326 |
echo "$s3g*$s4g*ft($s12t_rgb[1])*tclr" |
| 327 |
echo "$s3g*$s4g*ft($s12t_rgb[2])*tclr" |
| 328 |
echo "$s3g*$s4g*ft($s12t_rgb[3])*tclr" |
| 329 |
echo " 0 0 0" |
| 330 |
echo " glaze2.cal" |
| 331 |
echo "0" |
| 332 |
echo "9" |
| 333 |
ev "$sc*$s4r_rgb[1]-$s3c*$rg_r_arr[1]" \ |
| 334 |
"$sc*$s4r_rgb[2]-$s3c*$rg_g_arr[1]" \ |
| 335 |
"$sc*$s4r_rgb[3]-$s3c*$rg_b_arr[1]" |
| 336 |
ev "$s12t_rgb[1]^2*($sc*$s3r_rgb[1]-$s4c*$rg_r_arr[1])" \ |
| 337 |
"$s12t_rgb[2]^2*($sc*$s3r_rgb[2]-$s4c*$rg_g_arr[1])" \ |
| 338 |
"$s12t_rgb[3]^2*($sc*$s3r_rgb[3]-$s4c*$rg_b_arr[1])" |
| 339 |
ev "$sc*$s12t_rgb[1]*$s34t_rgb[1]" \ |
| 340 |
"$sc*$s12t_rgb[2]*$s34t_rgb[2]" \ |
| 341 |
"$sc*$s12t_rgb[3]*$s34t_rgb[3]" |
| 342 |
else if ($part_arr[$s1t] || $part_arr[$s2t]) then |
| 343 |
### Back pane has frit |
| 344 |
if ($?s1c) then |
| 345 |
set sc=$s1c |
| 346 |
set s1g=`ev "1-$s1c"` |
| 347 |
else |
| 348 |
set s1c=0 |
| 349 |
set s1g=1 |
| 350 |
endif |
| 351 |
if ($?s2c) then |
| 352 |
set sc=$s2c |
| 353 |
set s2g=`ev "1-$s2c"` |
| 354 |
else |
| 355 |
set s2c=0 |
| 356 |
set s2g=1 |
| 357 |
endif |
| 358 |
echo "10" |
| 359 |
echo "if(Rdot,cr(fr($s4r_rgb[1]),ft($s34t_rgb[1]),$s2g*rclr),cr($s1g*rclr,$s1g*$s2g*tclr,fr($s3r_rgb[1])))" |
| 360 |
echo "if(Rdot,cr(fr($s4r_rgb[2]),ft($s34t_rgb[2]),$s2g*rclr),cr($s1g*rclr,$s1g*$s2g*tclr,fr($s3r_rgb[2])))" |
| 361 |
echo "if(Rdot,cr(fr($s4r_rgb[3]),ft($s34t_rgb[3]),$s2g*rclr),cr($s1g*rclr,$s1g*$s2g*tclr,fr($s3r_rgb[3])))" |
| 362 |
echo "$s1g*$s2g*ft($s34t_rgb[1])*tclr" |
| 363 |
echo "$s1g*$s2g*ft($s34t_rgb[2])*tclr" |
| 364 |
echo "$s1g*$s2g*ft($s34t_rgb[3])*tclr" |
| 365 |
echo " 0 0 0" |
| 366 |
echo " glaze2.cal" |
| 367 |
echo "0" |
| 368 |
echo "9" |
| 369 |
ev "$s34t_rgb[1]^2*($sc*$s2r_rgb[1]-$s1c*$rg_r_arr[1])" \ |
| 370 |
"$s34t_rgb[2]^2*($sc*$s2r_rgb[2]-$s1c*$rg_g_arr[1])" \ |
| 371 |
"$s34t_rgb[3]^2*($sc*$s2r_rgb[3]-$s1c*$rg_b_arr[1])" |
| 372 |
ev "$sc*$s1r_rgb[1]-$s2c*$rg_r_arr[1]" \ |
| 373 |
"$sc*$s1r_rgb[2]-$s2c*$rg_g_arr[1]" \ |
| 374 |
"$sc*$s1r_rgb[3]-$s2c*$rg_b_arr[1]" |
| 375 |
ev "$sc*$s34t_rgb[1]*$s12t_rgb[1]" \ |
| 376 |
"$sc*$s34t_rgb[2]*$s12t_rgb[2]" \ |
| 377 |
"$sc*$s34t_rgb[3]*$s12t_rgb[3]" |
| 378 |
else |
| 379 |
### Low-E and regular glazing only |
| 380 |
echo "10" |
| 381 |
echo "if(Rdot,cr(fr($s4r_rgb[1]),ft($s34t_rgb[1]),fr($s2r_rgb[1])),cr(fr($s1r_rgb[1]),ft($s12t_rgb[1]),fr($s3r_rgb[1])))" |
| 382 |
echo "if(Rdot,cr(fr($s4r_rgb[2]),ft($s34t_rgb[2]),fr($s2r_rgb[2])),cr(fr($s1r_rgb[2]),ft($s12t_rgb[2]),fr($s3r_rgb[2])))" |
| 383 |
echo "if(Rdot,cr(fr($s4r_rgb[3]),ft($s34t_rgb[3]),fr($s2r_rgb[3])),cr(fr($s1r_rgb[3]),ft($s12t_rgb[3]),fr($s3r_rgb[3])))" |
| 384 |
echo "ft($s34t_rgb[1])*ft($s12t_rgb[1])" |
| 385 |
echo "ft($s34t_rgb[2])*ft($s12t_rgb[2])" |
| 386 |
echo "ft($s34t_rgb[3])*ft($s12t_rgb[3])" |
| 387 |
echo " 0 0 0" |
| 388 |
echo " glaze2.cal" |
| 389 |
echo "0" |
| 390 |
echo "9" |
| 391 |
echo " 0 0 0" |
| 392 |
echo " 0 0 0" |
| 393 |
echo " 0 0 0" |
| 394 |
endif |
| 395 |
echo "" |
| 396 |
exit 0 |
