1 |
#!/bin/csh -f |
2 |
# RCSid: $Id: glaze.csh,v 2.5 2004/08/25 19:13:30 greg Exp $ |
3 |
# |
4 |
# Complex glazing model (goes with glaze1.cal and glaze2.cal) |
5 |
# |
6 |
# Oct. 2002 Greg Ward |
7 |
# Aug. 2004 GW (added -f option to read glazings from file) |
8 |
# Funding for this development generously provided by Visarc, Inc. |
9 |
# (http://www.visarc.com) |
10 |
# |
11 |
|
12 |
################################################################# |
13 |
# |
14 |
# The general assumption is that one surface is uncoated, and |
15 |
# reflectances and transmittances are computed from this fact. |
16 |
# If the user tries to enter two coated surfaces on the same |
17 |
# pane, the script complains and exits. |
18 |
# |
19 |
# Supported surface types: |
20 |
# |
21 |
set sn_arr=("clear glass" "VE1-2M low-E coating" "PVB laminated" "V-175 white frit" "V-933 warm gray frit") |
22 |
# Glass-side hemispherical reflectances for each surface type: |
23 |
set rg_r_arr=(0.074 0.065 .11 0.33 0.15) |
24 |
set rg_g_arr=(0.077 0.058 .11 0.33 0.15) |
25 |
set rg_b_arr=(0.079 0.067 .11 0.33 0.15) |
26 |
# Coating-side hemispherical reflectance for each surface type: |
27 |
set rc_r_arr=(0.074 0.042 .11 0.59 0.21) |
28 |
set rc_g_arr=(0.077 0.049 .11 0.59 0.21) |
29 |
set rc_b_arr=(0.079 0.043 .11 0.59 0.21) |
30 |
# Hemispherical (normal) transmittance for each surface type: |
31 |
set tn_r_arr=(0.862 0.756 0.63 0.21 0.09) |
32 |
set tn_g_arr=(0.890 0.808 0.63 0.21 0.09) |
33 |
set tn_b_arr=(0.886 0.744 0.63 0.21 0.09) |
34 |
# Boolean whether coatings can have partial coverage: |
35 |
set part_arr=(0 0 0 1 1) |
36 |
|
37 |
set gfiles=() |
38 |
while ($#argv > 0) |
39 |
set header="Surface Tr Tg Tb Rcr Rcg Rcb Rgr Rgg Rgb Part" |
40 |
if ($#argv < 2 || "$argv[1]" != '-f') then |
41 |
echo "Usage: $0 [-f glazing.dat ..]" |
42 |
exit 1 |
43 |
endif |
44 |
shift argv |
45 |
set gf="$argv[1]" |
46 |
shift argv |
47 |
set gfiles=($gfiles:q $gf:q) |
48 |
if ("`sed -n 1p $gf:q`" != "$header") then |
49 |
echo "Bad header in $gf -- Expected: $header" |
50 |
exit 1 |
51 |
endif |
52 |
echo "Adding glazing types from file $gf :" |
53 |
set nl=`wc -l < $gf:q` |
54 |
@ i=2 |
55 |
while ($i <= $nl) |
56 |
set ln=(`sed -n ${i}p $gf:q`) |
57 |
if ($#ln != 11) then |
58 |
echo "Expected 11 words in line: $ln" |
59 |
exit 1 |
60 |
endif |
61 |
echo $ln[1] |
62 |
set sn_arr=($sn_arr:q $ln[1]) |
63 |
set tn_r_arr=($tn_r_arr $ln[2]) |
64 |
set tn_g_arr=($tn_g_arr $ln[3]) |
65 |
set tn_b_arr=($tn_b_arr $ln[4]) |
66 |
set rc_r_arr=($rc_r_arr $ln[5]) |
67 |
set rc_g_arr=($rc_g_arr $ln[6]) |
68 |
set rc_b_arr=($rc_b_arr $ln[7]) |
69 |
set rg_r_arr=($rg_r_arr $ln[8]) |
70 |
set rg_g_arr=($rg_g_arr $ln[9]) |
71 |
set rg_b_arr=($rg_b_arr $ln[10]) |
72 |
set part_arr=($part_arr $ln[11]) |
73 |
@ i++ |
74 |
end |
75 |
end |
76 |
if (! $#gfiles) unset gfiles |
77 |
|
78 |
################################################################# |
79 |
# |
80 |
# Get user input |
81 |
# |
82 |
echo -n "Enter the number of panes in the system: " |
83 |
set np="$<" |
84 |
if ($np != 1 && $np != 2) then |
85 |
echo "Must be 1 or 2 pane system" |
86 |
exit 1 |
87 |
endif |
88 |
echo "" |
89 |
echo "Window normal faces interior" |
90 |
echo "" |
91 |
if ($np == 1) then |
92 |
echo " | |" |
93 |
echo " | |" |
94 |
echo " | |" |
95 |
echo " | |-->" |
96 |
echo " | |" |
97 |
echo " | |" |
98 |
echo " | |" |
99 |
echo " s1 s2" |
100 |
else |
101 |
echo " | | | |" |
102 |
echo " | | | |" |
103 |
echo " | | | |" |
104 |
echo " | | | |-->" |
105 |
echo " | | | |" |
106 |
echo " | | | |" |
107 |
echo " | | | |" |
108 |
echo " s1 s2 s3 s4" |
109 |
endif |
110 |
echo "" |
111 |
echo "Supported surface types are:" |
112 |
set i=1 |
113 |
while ($i <= $#sn_arr) |
114 |
echo " " $i - $sn_arr[$i] |
115 |
@ i++ |
116 |
end |
117 |
echo "" |
118 |
echo -n "What is the type of s1? " |
119 |
set s1t="$<" |
120 |
echo -n "What is the type of s2? " |
121 |
set s2t="$<" |
122 |
if ($s1t != 1 && $s2t != 1) then |
123 |
echo "One surface of each pane must be $sn_arr[1]" |
124 |
exit 1 |
125 |
endif |
126 |
if ($part_arr[$s1t]) then |
127 |
echo -n "Enter fraction coverage for s1 (0-1): " |
128 |
set s1c="$<" |
129 |
endif |
130 |
if ($part_arr[$s2t]) then |
131 |
echo -n "Enter fraction coverage for s2 (0-1): " |
132 |
set s2c="$<" |
133 |
endif |
134 |
if ($np == 2) then |
135 |
echo -n "What is the type of s3? " |
136 |
set s3t="$<" |
137 |
echo -n "What is the type of s4? " |
138 |
set s4t="$<" |
139 |
if ($s3t != 1 && $s4t != 1) then |
140 |
echo "One surface of each pane must be $sn_arr[1]" |
141 |
exit 1 |
142 |
endif |
143 |
if ($part_arr[$s3t]) then |
144 |
echo -n "Enter fraction coverage for s3 (0-1): " |
145 |
set s3c="$<" |
146 |
endif |
147 |
if ($part_arr[$s4t]) then |
148 |
echo -n "Enter fraction coverage for s4 (0-1): " |
149 |
set s4c="$<" |
150 |
endif |
151 |
endif |
152 |
|
153 |
################################################################# |
154 |
# |
155 |
# Begin material comments |
156 |
# |
157 |
echo "" |
158 |
echo "############################################" |
159 |
echo "# Glazing produced by Radiance glaze script" |
160 |
echo '# $Revision$ $Date$' |
161 |
if ($?gfiles) then |
162 |
echo "# Loaded: $gfiles:q" |
163 |
echo "# `date`" |
164 |
endif |
165 |
echo "# Material surface normal points to interior" |
166 |
echo "# Number of panes in system: $np" |
167 |
|
168 |
if ($np == 2) goto glaze2 |
169 |
################################################################# |
170 |
# |
171 |
# Compute single glazing |
172 |
# |
173 |
set sc=1 |
174 |
echo "# Exterior surface s1 type: $sn_arr[$s1t]" |
175 |
if ($?s1c) then |
176 |
echo "# s1 coating coverage: $s1c" |
177 |
set sc=$s1c |
178 |
endif |
179 |
echo "# Interior surface s2 type: $sn_arr[$s2t]" |
180 |
if ($?s2c) then |
181 |
echo "# s2 coating coverage: $s2c" |
182 |
set sc=$s2c |
183 |
endif |
184 |
if ($s1t != 1) then |
185 |
set ct=$s1t |
186 |
echo -n "# Exterior normal hemispherical reflectance: " |
187 |
ev ".265*($sc*$rc_r_arr[$ct]+(1-$sc)*$rc_r_arr[1])+.670*($sc*$rc_g_arr[$ct]+(1-$sc)*$rc_g_arr[1])+.065*($sc*$rc_b_arr[$ct]+(1-$sc)*$rc_b_arr[1])" |
188 |
echo -n "# Interior normal hemispherical reflectance: " |
189 |
ev ".265*($sc*$rg_r_arr[$ct]+(1-$sc)*$rg_r_arr[1])+.670*($sc*$rg_g_arr[$ct]+(1-$sc)*$rg_g_arr[1])+.065*($sc*$rg_b_arr[$ct]+(1-$sc)*$rg_b_arr[1])" |
190 |
else |
191 |
set ct=$s2t |
192 |
echo -n "# Exterior normal hemispherical reflectance: " |
193 |
ev ".265*($sc*$rg_r_arr[$ct]+(1-$sc)*$rg_r_arr[1])+.670*($sc*$rg_g_arr[$ct]+(1-$sc)*$rg_g_arr[1])+.065*($sc*$rg_b_arr[$ct]+(1-$sc)*$rg_b_arr[1])" |
194 |
echo -n "# Interior normal hemispherical reflectance: " |
195 |
ev ".265*($sc*$rc_r_arr[$ct]+(1-$sc)*$rc_r_arr[1])+.670*($sc*$rc_g_arr[$ct]+(1-$sc)*$rc_g_arr[1])+.065*($sc*$rc_b_arr[$ct]+(1-$sc)*$rc_b_arr[1])" |
196 |
endif |
197 |
echo -n "# Normal hemispherical transmittance: " |
198 |
ev ".265*($sc*$tn_r_arr[$ct]+(1-$sc)*$tn_r_arr[1])+.670*($sc*$tn_g_arr[$ct]+(1-$sc)*$tn_g_arr[1])+.065*($sc*$tn_b_arr[$ct]+(1-$sc)*$tn_b_arr[1])" |
199 |
echo "#" |
200 |
echo "void BRTDfunc glaze1_unnamed" |
201 |
if ($part_arr[$s1t] || $part_arr[$s2t]) then |
202 |
### Frit glazing |
203 |
echo "10" |
204 |
echo " sr_frit_r sr_frit_g sr_frit_b" |
205 |
echo " st_frit_r st_frit_g st_frit_b" |
206 |
echo " 0 0 0" |
207 |
echo " glaze1.cal" |
208 |
echo "0" |
209 |
echo "11" |
210 |
if ($s2t == 1) then |
211 |
ev "$s1c*($rg_r_arr[$s1t]-$rg_r_arr[1])" \ |
212 |
"$s1c*($rg_g_arr[$s1t]-$rg_g_arr[1])" \ |
213 |
"$s1c*($rg_b_arr[$s1t]-$rg_b_arr[1])" |
214 |
ev "$s1c*$rc_r_arr[$s1t]" "$s1c*$rc_g_arr[$s1t]" "$s1c*$rc_b_arr[$s1t]" |
215 |
ev "$s1c*$tn_r_arr[$s1t]" "$s1c*$tn_g_arr[$s1t]" "$s1c*$tn_b_arr[$s1t]" |
216 |
echo " 1 $s1c" |
217 |
else |
218 |
ev "$s2c*$rc_r_arr[$s2t]" "$s2c*$rc_g_arr[$s2t]" "$s2c*$rc_b_arr[$s2t]" |
219 |
ev "$s2c*($rg_r_arr[$s2t]-$rg_r_arr[1])" \ |
220 |
"$s2c*($rg_g_arr[$s2t]-$rg_g_arr[1])" \ |
221 |
"$s2c*($rg_b_arr[$s2t]-$rg_b_arr[1])" |
222 |
ev "$s2c*$tn_r_arr[$s2t]" "$s2c*$tn_g_arr[$s2t]" "$s2c*$tn_b_arr[$s2t]" |
223 |
echo " -1 $s2c" |
224 |
endif |
225 |
else |
226 |
### Low-E glazing |
227 |
echo "10" |
228 |
echo " sr_lowE_r sr_lowE_g sr_lowE_b" |
229 |
echo " st_lowE_r st_lowE_g st_lowE_b" |
230 |
echo " 0 0 0" |
231 |
echo " glaze1.cal" |
232 |
echo "0" |
233 |
echo "19" |
234 |
echo " 0 0 0" |
235 |
echo " 0 0 0" |
236 |
echo " 0 0 0" |
237 |
if ($s2t == 1) then |
238 |
echo " 1" |
239 |
set st=$s1t |
240 |
else |
241 |
echo " -1" |
242 |
set st=$s2t |
243 |
endif |
244 |
echo " $rg_r_arr[$st] $rg_g_arr[$st] $rg_b_arr[$st]" |
245 |
echo " $rc_r_arr[$st] $rc_g_arr[$st] $rc_b_arr[$st]" |
246 |
echo " $tn_r_arr[$st] $tn_g_arr[$st] $tn_b_arr[$st]" |
247 |
endif |
248 |
echo "" |
249 |
exit 0 |
250 |
|
251 |
glaze2: |
252 |
################################################################# |
253 |
# |
254 |
# Compute double glazing |
255 |
# |
256 |
if ($s2t != 1) then |
257 |
set s2r_rgb=($rc_r_arr[$s2t] $rc_g_arr[$s2t] $rc_b_arr[$s2t]) |
258 |
set s1r_rgb=($rg_r_arr[$s2t] $rg_g_arr[$s2t] $rg_b_arr[$s2t]) |
259 |
set s12t_rgb=($tn_r_arr[$s2t] $tn_g_arr[$s2t] $tn_b_arr[$s2t]) |
260 |
else |
261 |
set s2r_rgb=($rg_r_arr[$s1t] $rg_g_arr[$s1t] $rg_b_arr[$s1t]) |
262 |
set s1r_rgb=($rc_r_arr[$s1t] $rc_g_arr[$s1t] $rc_b_arr[$s1t]) |
263 |
set s12t_rgb=($tn_r_arr[$s1t] $tn_g_arr[$s1t] $tn_b_arr[$s1t]) |
264 |
endif |
265 |
if ($s4t != 1) then |
266 |
set s4r_rgb=($rc_r_arr[$s4t] $rc_g_arr[$s4t] $rc_b_arr[$s4t]) |
267 |
set s3r_rgb=($rg_r_arr[$s4t] $rg_g_arr[$s4t] $rg_b_arr[$s4t]) |
268 |
set s34t_rgb=($tn_r_arr[$s4t] $tn_g_arr[$s4t] $tn_b_arr[$s4t]) |
269 |
else |
270 |
set s4r_rgb=($rg_r_arr[$s3t] $rg_g_arr[$s3t] $rg_b_arr[$s3t]) |
271 |
set s3r_rgb=($rc_r_arr[$s3t] $rc_g_arr[$s3t] $rc_b_arr[$s3t]) |
272 |
set s34t_rgb=($tn_r_arr[$s3t] $tn_g_arr[$s3t] $tn_b_arr[$s3t]) |
273 |
endif |
274 |
set s12c=1 |
275 |
echo "# Exterior surface s1 type: $sn_arr[$s1t]" |
276 |
if ($?s1c) then |
277 |
echo "# s1 coating coverage: $s1c" |
278 |
set s12c=$s1c |
279 |
endif |
280 |
echo "# Inner surface s2 type: $sn_arr[$s2t]" |
281 |
if ($?s2c) then |
282 |
echo "# s2 coating coverage: $s2c" |
283 |
set s12c=$s2c |
284 |
endif |
285 |
set s34c=1 |
286 |
echo "# Inner surface s3 type: $sn_arr[$s3t]" |
287 |
if ($?s3c) then |
288 |
echo "# s3 coating coverage: $s3c" |
289 |
set s34c=$s3c |
290 |
endif |
291 |
echo "# Interior surface s4 type: $sn_arr[$s4t]" |
292 |
if ($?s4c) then |
293 |
echo "# s4 coating coverage: $s4c" |
294 |
set s34c=$s4c |
295 |
endif |
296 |
# Approximate reflectance and transmittance for comment using gray values |
297 |
set rglass=`ev ".265*$rg_r_arr[1]+.670*$rg_g_arr[1]+.065*$rg_b_arr[1]"` |
298 |
set tglass=`ev ".265*$tn_r_arr[1]+.670*$tn_g_arr[1]+.065*$tn_b_arr[1]"` |
299 |
set s1r_gry=`ev "$s12c*(.265*$s1r_rgb[1]+.670*$s1r_rgb[2]+.065*$s1r_rgb[3])+(1-$s12c)*$rglass"` |
300 |
set s2r_gry=`ev "$s12c*(.265*$s2r_rgb[1]+.670*$s2r_rgb[2]+.065*$s2r_rgb[3])+(1-$s12c)*$rglass"` |
301 |
set s12t_gry=`ev "$s12c*(.265*$s12t_rgb[1]+.670*$s12t_rgb[2]+.065*$s12t_rgb[3])+(1-$s12c)*$tglass"` |
302 |
set s3r_gry=`ev "$s34c*(.265*$s3r_rgb[1]+.670*$s3r_rgb[2]+.065*$s3r_rgb[3])+(1-$s34c)*$rglass"` |
303 |
set s4r_gry=`ev "$s34c*(.265*$s4r_rgb[1]+.670*$s4r_rgb[2]+.065*$s4r_rgb[3])+(1-$s34c)*$rglass"` |
304 |
set s34t_gry=`ev "$s34c*(.265*$s34t_rgb[1]+.670*$s34t_rgb[2]+.065*$s34t_rgb[3])+(1-$s34c)*$tglass"` |
305 |
echo -n "# Exterior normal hemispherical reflectance: " |
306 |
ev "$s1r_gry + $s12t_gry^2*$s3r_gry" |
307 |
echo -n "# Interior normal hemispherical reflectance: " |
308 |
ev "$s4r_gry + $s34t_gry^2*$s2r_gry" |
309 |
echo -n "# Normal hemispherical transmittance: " |
310 |
ev "$s12t_gry*$s34t_gry" |
311 |
echo "#" |
312 |
echo "void BRTDfunc glaze2_unnamed" |
313 |
|
314 |
if ($part_arr[$s3t] || $part_arr[$s4t]) then |
315 |
### Front pane has frit |
316 |
if ($part_arr[$s1t] || $part_arr[$s2t]) then |
317 |
echo "Only one pane can have frit" |
318 |
exit 1 |
319 |
endif |
320 |
if ($?s3c) then |
321 |
set sc=$s3c |
322 |
set s3g=`ev "1-$s3c"` |
323 |
else |
324 |
set s3c=0 |
325 |
set s3g=1 |
326 |
endif |
327 |
if ($?s4c) then |
328 |
set sc=$s4c |
329 |
set s4g=`ev "1-$s4c"` |
330 |
else |
331 |
set s4c=0 |
332 |
set s4g=1 |
333 |
endif |
334 |
echo "10" |
335 |
echo "if(Rdot,cr($s4g*rclr,$s3g*$s4g*tclr,fr($s2r_rgb[1])),cr(fr($s1r_rgb[1]),ft($s12t_rgb[1]),$s3g*rclr))" |
336 |
echo "if(Rdot,cr($s4g*rclr,$s3g*$s4g*tclr,fr($s2r_rgb[2])),cr(fr($s1r_rgb[2]),ft($s12t_rgb[2]),$s3g*rclr))" |
337 |
echo "if(Rdot,cr($s4g*rclr,$s3g*$s4g*tclr,fr($s2r_rgb[3])),cr(fr($s1r_rgb[3]),ft($s12t_rgb[3]),$s3g*rclr))" |
338 |
echo "$s3g*$s4g*ft($s12t_rgb[1])*tclr" |
339 |
echo "$s3g*$s4g*ft($s12t_rgb[2])*tclr" |
340 |
echo "$s3g*$s4g*ft($s12t_rgb[3])*tclr" |
341 |
echo " 0 0 0" |
342 |
echo " glaze2.cal" |
343 |
echo "0" |
344 |
echo "9" |
345 |
ev "$sc*$s4r_rgb[1]-$s3c*$rg_r_arr[1]" \ |
346 |
"$sc*$s4r_rgb[2]-$s3c*$rg_g_arr[1]" \ |
347 |
"$sc*$s4r_rgb[3]-$s3c*$rg_b_arr[1]" |
348 |
ev "$s12t_rgb[1]^2*($sc*$s3r_rgb[1]-$s4c*$rg_r_arr[1])" \ |
349 |
"$s12t_rgb[2]^2*($sc*$s3r_rgb[2]-$s4c*$rg_g_arr[1])" \ |
350 |
"$s12t_rgb[3]^2*($sc*$s3r_rgb[3]-$s4c*$rg_b_arr[1])" |
351 |
ev "$sc*$s12t_rgb[1]*$s34t_rgb[1]" \ |
352 |
"$sc*$s12t_rgb[2]*$s34t_rgb[2]" \ |
353 |
"$sc*$s12t_rgb[3]*$s34t_rgb[3]" |
354 |
else if ($part_arr[$s1t] || $part_arr[$s2t]) then |
355 |
### Back pane has frit |
356 |
if ($?s1c) then |
357 |
set sc=$s1c |
358 |
set s1g=`ev "1-$s1c"` |
359 |
else |
360 |
set s1c=0 |
361 |
set s1g=1 |
362 |
endif |
363 |
if ($?s2c) then |
364 |
set sc=$s2c |
365 |
set s2g=`ev "1-$s2c"` |
366 |
else |
367 |
set s2c=0 |
368 |
set s2g=1 |
369 |
endif |
370 |
echo "10" |
371 |
echo "if(Rdot,cr(fr($s4r_rgb[1]),ft($s34t_rgb[1]),$s2g*rclr),cr($s1g*rclr,$s1g*$s2g*tclr,fr($s3r_rgb[1])))" |
372 |
echo "if(Rdot,cr(fr($s4r_rgb[2]),ft($s34t_rgb[2]),$s2g*rclr),cr($s1g*rclr,$s1g*$s2g*tclr,fr($s3r_rgb[2])))" |
373 |
echo "if(Rdot,cr(fr($s4r_rgb[3]),ft($s34t_rgb[3]),$s2g*rclr),cr($s1g*rclr,$s1g*$s2g*tclr,fr($s3r_rgb[3])))" |
374 |
echo "$s1g*$s2g*ft($s34t_rgb[1])*tclr" |
375 |
echo "$s1g*$s2g*ft($s34t_rgb[2])*tclr" |
376 |
echo "$s1g*$s2g*ft($s34t_rgb[3])*tclr" |
377 |
echo " 0 0 0" |
378 |
echo " glaze2.cal" |
379 |
echo "0" |
380 |
echo "9" |
381 |
ev "$s34t_rgb[1]^2*($sc*$s2r_rgb[1]-$s1c*$rg_r_arr[1])" \ |
382 |
"$s34t_rgb[2]^2*($sc*$s2r_rgb[2]-$s1c*$rg_g_arr[1])" \ |
383 |
"$s34t_rgb[3]^2*($sc*$s2r_rgb[3]-$s1c*$rg_b_arr[1])" |
384 |
ev "$sc*$s1r_rgb[1]-$s2c*$rg_r_arr[1]" \ |
385 |
"$sc*$s1r_rgb[2]-$s2c*$rg_g_arr[1]" \ |
386 |
"$sc*$s1r_rgb[3]-$s2c*$rg_b_arr[1]" |
387 |
ev "$sc*$s34t_rgb[1]*$s12t_rgb[1]" \ |
388 |
"$sc*$s34t_rgb[2]*$s12t_rgb[2]" \ |
389 |
"$sc*$s34t_rgb[3]*$s12t_rgb[3]" |
390 |
else |
391 |
### Low-E and regular glazing only |
392 |
echo "10" |
393 |
echo "if(Rdot,cr(fr($s4r_rgb[1]),ft($s34t_rgb[1]),fr($s2r_rgb[1])),cr(fr($s1r_rgb[1]),ft($s12t_rgb[1]),fr($s3r_rgb[1])))" |
394 |
echo "if(Rdot,cr(fr($s4r_rgb[2]),ft($s34t_rgb[2]),fr($s2r_rgb[2])),cr(fr($s1r_rgb[2]),ft($s12t_rgb[2]),fr($s3r_rgb[2])))" |
395 |
echo "if(Rdot,cr(fr($s4r_rgb[3]),ft($s34t_rgb[3]),fr($s2r_rgb[3])),cr(fr($s1r_rgb[3]),ft($s12t_rgb[3]),fr($s3r_rgb[3])))" |
396 |
echo "ft($s34t_rgb[1])*ft($s12t_rgb[1])" |
397 |
echo "ft($s34t_rgb[2])*ft($s12t_rgb[2])" |
398 |
echo "ft($s34t_rgb[3])*ft($s12t_rgb[3])" |
399 |
echo " 0 0 0" |
400 |
echo " glaze2.cal" |
401 |
echo "0" |
402 |
echo "9" |
403 |
echo " 0 0 0" |
404 |
echo " 0 0 0" |
405 |
echo " 0 0 0" |
406 |
endif |
407 |
echo "" |
408 |
exit 0 |