1 |
/* Copyright (c) 1994,2006 *Fraunhofer Institut for Solar Energy Systems |
2 |
* Heidenhofstr. 2, D-79110 Freiburg, Germany |
3 |
* *Agence de l'Environnement et de la Maitrise de l'Energie |
4 |
* Centre de Valbonne, 500 route des Lucioles, 06565 Sophia Antipolis Cedex, France |
5 |
* *BOUYGUES |
6 |
* 1 Avenue Eugene Freyssinet, Saint-Quentin-Yvelines, France |
7 |
* print colored output if activated in command line (-C). Based on model from A. Diakite, TU-Berlin. Implemented by J. Wienold, August 26 2018 |
8 |
*/ |
9 |
|
10 |
#define _USE_MATH_DEFINES |
11 |
#include <stdio.h> |
12 |
#include <string.h> |
13 |
#include <math.h> |
14 |
#include <stdlib.h> |
15 |
|
16 |
#include "color.h" |
17 |
#include "sun.h" |
18 |
#include "paths.h" |
19 |
|
20 |
#define DOT(v1,v2) (v1[0]*v2[0]+v1[1]*v2[1]+v1[2]*v2[2]) |
21 |
|
22 |
double normsc(); |
23 |
|
24 |
/*static char *rcsid="$Header: /cvs/radiance/ray/src/gen/gendaylit.c,v 2.18 2019/11/07 23:15:06 greg Exp $";*/ |
25 |
|
26 |
float coeff_perez[] = { |
27 |
1.3525,-0.2576,-0.2690,-1.4366,-0.7670,0.0007,1.2734,-0.1233,2.8000,0.6004,1.2375,1.000,1.8734,0.6297, |
28 |
0.9738,0.2809,0.0356,-0.1246,-0.5718,0.9938,-1.2219,-0.7730,1.4148,1.1016,-0.2054,0.0367,-3.9128,0.9156, |
29 |
6.9750,0.1774,6.4477,-0.1239,-1.5798,-0.5081,-1.7812,0.1080,0.2624,0.0672,-0.2190,-0.4285,-1.1000,-0.2515, |
30 |
0.8952,0.0156,0.2782,-0.1812,-4.5000,1.1766,24.7219,-13.0812,-37.7000,34.8438,-5.0000,1.5218,3.9229, |
31 |
-2.6204,-0.0156,0.1597,0.4199,-0.5562,-0.5484,-0.6654,-0.2672,0.7117,0.7234,-0.6219,-5.6812,2.6297, |
32 |
33.3389,-18.3000,-62.2500,52.0781,-3.5000,0.0016,1.1477,0.1062,0.4659,-0.3296,-0.0876,-0.0329,-0.6000, |
33 |
-0.3566,-2.5000,2.3250,0.2937,0.0496,-5.6812,1.8415,21.0000,-4.7656,-21.5906,7.2492,-3.5000,-0.1554, |
34 |
1.4062,0.3988,0.0032,0.0766,-0.0656,-0.1294,-1.0156,-0.3670,1.0078,1.4051,0.2875,-0.5328,-3.8500,3.3750, |
35 |
14.0000,-0.9999,-7.1406,7.5469,-3.4000,-0.1078,-1.0750,1.5702,-0.0672,0.4016,0.3017,-0.4844,-1.0000, |
36 |
0.0211,0.5025,-0.5119,-0.3000,0.1922,0.7023,-1.6317,19.0000,-5.0000,1.2438,-1.9094,-4.0000,0.0250,0.3844, |
37 |
0.2656,1.0468,-0.3788,-2.4517,1.4656,-1.0500,0.0289,0.4260,0.3590,-0.3250,0.1156,0.7781,0.0025,31.0625, |
38 |
-14.5000,-46.1148,55.3750,-7.2312,0.4050,13.3500,0.6234,1.5000,-0.6426,1.8564,0.5636}; |
39 |
|
40 |
|
41 |
float defangle_theta[] = { |
42 |
84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, 84, |
43 |
84, 84, 84, 84, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, 72, |
44 |
72, 72, 72, 72, 72, 72, 72, 72, 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, 60, |
45 |
60, 60, 60, 60, 60, 60, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, |
46 |
48, 48, 48, 48, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 36, 24, 24, 24, 24, |
47 |
24, 24, 24, 24, 24, 24, 24, 24, 12, 12, 12, 12, 12, 12, 0}; |
48 |
|
49 |
float defangle_phi[] = { |
50 |
0, 12, 24, 36, 48, 60, 72, 84, 96, 108, 120, 132, 144, 156, 168, 180, 192, 204, 216, 228, 240, 252, 264, |
51 |
276, 288, 300, 312, 324, 336, 348, 0, 12, 24, 36, 48, 60, 72, 84, 96, 108, 120, 132, 144, 156, 168, 180, |
52 |
192, 204, 216, 228, 240, 252, 264, 276, 288, 300, 312, 324, 336, 348, 0, 15, 30, 45, 60, 75, 90, 105, |
53 |
120, 135, 150, 165, 180, 195, 210, 225, 240, 255, 270, 285, 300, 315, 330, 345, 0, 15, 30, 45, 60, 75, |
54 |
90, 105, 120, 135, 150, 165, 180, 195, 210, 225, 240, 255, 270, 285, 300, 315, 330, 345, 0, 20, 40, 60, |
55 |
80, 100, 120, 140, 160, 180, 200, 220, 240, 260, 280, 300, 320, 340, 0, 30, 60, 90, 120, 150, 180, 210, |
56 |
240, 270, 300, 330, 0, 60, 120, 180, 240, 300, 0}; |
57 |
/* default values for Berlin */ |
58 |
float locus[] = { |
59 |
-4.843e9,2.5568e6,0.24282e3,0.23258,-4.843e9,2.5568e6,0.24282e3,0.23258,-1.2848,1.7519,-0.093786}; |
60 |
|
61 |
|
62 |
|
63 |
/* Perez sky parametrization: epsilon and delta calculations from the direct and diffuse irradiances */ |
64 |
double sky_brightness(); |
65 |
double sky_clearness(); |
66 |
|
67 |
/* calculation of the direct and diffuse components from the Perez parametrization */ |
68 |
double diffuse_irradiance_from_sky_brightness(); |
69 |
double direct_irradiance_from_sky_clearness(); |
70 |
|
71 |
/* Perez global horizontal, diffuse horizontal and direct normal luminous efficacy models : */ |
72 |
/* input w(cm)=2cm, solar zenith angle(degrees); output efficacy(lm/W) */ |
73 |
|
74 |
double glob_h_effi_PEREZ(); |
75 |
double glob_h_diffuse_effi_PEREZ(); |
76 |
double direct_n_effi_PEREZ(); |
77 |
|
78 |
/*likelihood check of the epsilon, delta, direct and diffuse components*/ |
79 |
void check_parametrization(); |
80 |
void check_irradiances(); |
81 |
void check_illuminances(); |
82 |
void illu_to_irra_index(); |
83 |
void print_error_sky(); |
84 |
|
85 |
double calc_rel_lum_perez(double dzeta,double gamma,double Z,double epsilon,double Delta,float coeff_perez[]); |
86 |
void coeff_lum_perez(double Z, double epsilon, double Delta, float coeff_perez[]); |
87 |
double radians(double degres); |
88 |
double degres(double radians); |
89 |
void theta_phi_to_dzeta_gamma(double theta,double phi,double *dzeta,double *gamma, double Z); |
90 |
double integ_lv(float *lv,float *theta); |
91 |
|
92 |
void printdefaults(); |
93 |
void check_sun_position(); |
94 |
void computesky(); |
95 |
void printhead(int ac, char** av); |
96 |
void usage_error(char* msg); |
97 |
void printsky(); |
98 |
|
99 |
FILE * frlibopen(char* fname); |
100 |
|
101 |
/* astronomy and geometry*/ |
102 |
double get_eccentricity(); |
103 |
double air_mass(); |
104 |
|
105 |
double solar_sunset(int month, int day); |
106 |
double solar_sunrise(int month, int day); |
107 |
|
108 |
const double AU = 149597890E3; |
109 |
const double solar_constant_e = 1367; /* solar constant W/m^2 */ |
110 |
const double solar_constant_l = 127500; /* solar constant lux */ |
111 |
|
112 |
const double half_sun_angle = 0.2665; |
113 |
const double half_direct_angle = 2.85; |
114 |
|
115 |
const double skyclearinf = 1.0; /* limitations for the variation of the Perez parameters */ |
116 |
const double skyclearsup = 12.01; |
117 |
const double skybriginf = 0.01; |
118 |
const double skybrigsup = 0.6; |
119 |
|
120 |
|
121 |
|
122 |
/* required values */ |
123 |
int year = 0; /* year (optional) */ |
124 |
int month, day; /* date */ |
125 |
double hour; /* time */ |
126 |
int tsolar; /* 0=standard, 1=solar */ |
127 |
double altitude, azimuth; /* or solar angles */ |
128 |
|
129 |
|
130 |
|
131 |
/* definition of the sky conditions through the Perez parametrization */ |
132 |
double skyclearness = 0; |
133 |
double skybrightness = 0; |
134 |
double solarradiance; |
135 |
double diffuseilluminance, directilluminance, diffuseirradiance, directirradiance, globalirradiance; |
136 |
double sunzenith, daynumber, atm_preci_water=2; |
137 |
|
138 |
/*double sunaltitude_border = 0;*/ |
139 |
double diffnormalization = 0; |
140 |
double dirnormalization = 0; |
141 |
double *c_perez; |
142 |
|
143 |
int output=0; /* define the unit of the output (sky luminance or radiance): */ |
144 |
/* visible watt=0, solar watt=1, lumen=2 */ |
145 |
int input=0; /* define the input for the calulation */ |
146 |
int color_output=0; |
147 |
int suppress_warnings=0; |
148 |
|
149 |
/* default values */ |
150 |
int cloudy = 0; /* 1=standard, 2=uniform */ |
151 |
int dosun = 1; |
152 |
double zenithbr = -1.0; |
153 |
double betaturbidity = 0.1; |
154 |
double gprefl = 0.2; |
155 |
int S_INTER=0; |
156 |
|
157 |
|
158 |
/* computed values */ |
159 |
double sundir[3]; |
160 |
double groundbr = 0; |
161 |
double F2; |
162 |
double solarbr = 0.0; |
163 |
int u_solar = 0; /* -1=irradiance, 1=radiance */ |
164 |
float timeinterval = 0; |
165 |
|
166 |
char *progname; |
167 |
char errmsg[128]; |
168 |
|
169 |
double st; |
170 |
|
171 |
|
172 |
int main(int argc, char** argv) |
173 |
{ |
174 |
int i; |
175 |
|
176 |
progname = argv[0]; |
177 |
if (argc == 2 && !strcmp(argv[1], "-defaults")) { |
178 |
printdefaults(); |
179 |
return 0; |
180 |
} |
181 |
if (argc < 4) |
182 |
usage_error("arg count"); |
183 |
if (!strcmp(argv[1], "-ang")) { |
184 |
altitude = atof(argv[2]) * (M_PI/180); |
185 |
azimuth = atof(argv[3]) * (M_PI/180); |
186 |
month = 0; |
187 |
} else { |
188 |
month = atoi(argv[1]); |
189 |
if (month < 1 || month > 12) |
190 |
usage_error("bad month"); |
191 |
day = atoi(argv[2]); |
192 |
if (day < 1 || day > 31) |
193 |
usage_error("bad day"); |
194 |
hour = atof(argv[3]); |
195 |
if (hour < 0 || hour >= 24) |
196 |
usage_error("bad hour"); |
197 |
tsolar = argv[3][0] == '+'; |
198 |
} |
199 |
for (i = 4; i < argc; i++) |
200 |
if (argv[i][0] == '-' || argv[i][0] == '+') |
201 |
switch (argv[i][1]) { |
202 |
case 's': |
203 |
cloudy = 0; |
204 |
dosun = argv[i][0] == '+'; |
205 |
break; |
206 |
case 'y': |
207 |
year = atoi(argv[++i]); |
208 |
break; |
209 |
case 'R': |
210 |
u_solar = argv[i][1] == 'R' ? -1 : 1; |
211 |
solarbr = atof(argv[++i]); |
212 |
break; |
213 |
case 'c': |
214 |
cloudy = argv[i][0] == '+' ? 2 : 1; |
215 |
dosun = 0; |
216 |
break; |
217 |
case 'C': |
218 |
if (argv[i][2] == 'I' && argv[i][3] == 'E' ) { |
219 |
locus[0] = -4.607e9; |
220 |
locus[1] = 2.9678e6; |
221 |
locus[2] = 0.09911e3; |
222 |
locus[3] = 0.244063; |
223 |
locus[4] = -2.0064e9; |
224 |
locus[5] = 1.9018e6; |
225 |
locus[6] = 0.24748e3; |
226 |
locus[7] = 0.23704; |
227 |
locus[8] = -3.0; |
228 |
locus[9] = 2.87; |
229 |
locus[10] = -0.275; |
230 |
}else{ color_output = 1; |
231 |
} |
232 |
break; |
233 |
case 'l': |
234 |
locus[0] = atof(argv[++i]); |
235 |
locus[1] = atof(argv[++i]); |
236 |
locus[2] = atof(argv[++i]); |
237 |
locus[3] = atof(argv[++i]); |
238 |
locus[4] = locus[0]; |
239 |
locus[5] = locus[1]; |
240 |
locus[6] = locus[2]; |
241 |
locus[7] = locus[3]; |
242 |
locus[8] = atof(argv[++i]); |
243 |
locus[9] = atof(argv[++i]); |
244 |
locus[10] = atof(argv[++i]); |
245 |
break; |
246 |
|
247 |
case 't': |
248 |
betaturbidity = atof(argv[++i]); |
249 |
break; |
250 |
case 'w': |
251 |
suppress_warnings = 1; |
252 |
break; |
253 |
case 'b': |
254 |
zenithbr = atof(argv[++i]); |
255 |
break; |
256 |
case 'g': |
257 |
gprefl = atof(argv[++i]); |
258 |
break; |
259 |
case 'a': |
260 |
s_latitude = atof(argv[++i]) * (M_PI/180); |
261 |
break; |
262 |
case 'o': |
263 |
s_longitude = atof(argv[++i]) * (M_PI/180); |
264 |
break; |
265 |
case 'm': |
266 |
s_meridian = atof(argv[++i]) * (M_PI/180); |
267 |
break; |
268 |
|
269 |
case 'O': |
270 |
output = atof(argv[++i]); /*define the unit of the output of the program: |
271 |
sky and sun luminance/radiance |
272 |
(0==W visible, 1==W solar radiation, 2==lm) */ |
273 |
break; |
274 |
|
275 |
case 'P': |
276 |
input = 0; /* Perez parameters: epsilon, delta */ |
277 |
skyclearness = atof(argv[++i]); |
278 |
skybrightness = atof(argv[++i]); |
279 |
break; |
280 |
|
281 |
case 'W': /* direct normal Irradiance [W/m^2] */ |
282 |
input = 1; /* diffuse horizontal Irrad. [W/m^2] */ |
283 |
directirradiance = atof(argv[++i]); |
284 |
diffuseirradiance = atof(argv[++i]); |
285 |
break; |
286 |
|
287 |
case 'L': /* direct normal Illuminance [Lux] */ |
288 |
input = 2; /* diffuse horizontal Ill. [Lux] */ |
289 |
directilluminance = atof(argv[++i]); |
290 |
diffuseilluminance = atof(argv[++i]); |
291 |
break; |
292 |
|
293 |
case 'G': /* direct horizontal Irradiance [W/m^2] */ |
294 |
input = 3; /* diffuse horizontal Irrad. [W/m^2] */ |
295 |
directirradiance = atof(argv[++i]); |
296 |
diffuseirradiance = atof(argv[++i]); |
297 |
break; |
298 |
|
299 |
case 'E': /* Erbs model based on the */ |
300 |
input = 4; /* global-horizontal irradiance [W/m^2] */ |
301 |
globalirradiance = atof(argv[++i]); |
302 |
break; |
303 |
|
304 |
case 'i': |
305 |
timeinterval = atof(argv[++i]); |
306 |
break; |
307 |
|
308 |
|
309 |
default: |
310 |
sprintf(errmsg, "unknown option: %s", argv[i]); |
311 |
usage_error(errmsg); |
312 |
} |
313 |
else |
314 |
usage_error("bad option"); |
315 |
|
316 |
if (month && !tsolar && fabs(s_meridian-s_longitude) > 45*M_PI/180) |
317 |
fprintf(stderr,"%s: warning: %.1f hours btwn. standard meridian and longitude\n", |
318 |
progname, (s_longitude-s_meridian)*12/M_PI); |
319 |
|
320 |
|
321 |
/* dynamic memory allocation for the pointers */ |
322 |
if ( (c_perez = calloc(5, sizeof(double))) == NULL ) |
323 |
{ fprintf(stderr,"Out of memory error in function main"); return 1; } |
324 |
|
325 |
|
326 |
printhead(argc, argv); |
327 |
computesky(); |
328 |
printsky(); |
329 |
return 0; |
330 |
|
331 |
} |
332 |
|
333 |
|
334 |
|
335 |
|
336 |
|
337 |
void computesky() |
338 |
{ |
339 |
|
340 |
int j; |
341 |
|
342 |
float *lv_mod; /* 145 luminance values */ |
343 |
float *theta_o, *phi_o; |
344 |
double dzeta, gamma; |
345 |
double normfactor; |
346 |
double erbs_s0, erbs_kt; |
347 |
|
348 |
|
349 |
/* compute solar direction */ |
350 |
|
351 |
if (month) { /* from date and time */ |
352 |
double sd; |
353 |
|
354 |
st = hour; |
355 |
if (year) { /* Michalsky algorithm? */ |
356 |
double mjd = mjdate(year, month, day, hour); |
357 |
if (tsolar) |
358 |
sd = msdec(mjd, NULL); |
359 |
else |
360 |
sd = msdec(mjd, &st); |
361 |
} else { |
362 |
int jd = jdate(month, day); /* Julian date */ |
363 |
sd = sdec(jd); /* solar declination */ |
364 |
if (!tsolar) /* get solar time? */ |
365 |
st = hour + stadj(jd); |
366 |
} |
367 |
|
368 |
if(timeinterval) { |
369 |
|
370 |
if(timeinterval<0) { |
371 |
fprintf(stderr, "time interval negative\n"); |
372 |
exit(1); |
373 |
} |
374 |
|
375 |
if(fabs(solar_sunrise(month,day)-st)<=timeinterval/120) { |
376 |
st= (st+timeinterval/120+solar_sunrise(month,day))/2; |
377 |
if(suppress_warnings==0) |
378 |
{ fprintf(stderr, "Solar position corrected at time step %d %d %.3f\n",month,day,hour); } |
379 |
} |
380 |
|
381 |
if(fabs(solar_sunset(month,day)-st)<timeinterval/120) { |
382 |
st= (st-timeinterval/120+solar_sunset(month,day))/2; |
383 |
if(suppress_warnings==0) |
384 |
{ fprintf(stderr, "Solar position corrected at time step %d %d %.3f\n",month,day,hour); } |
385 |
} |
386 |
|
387 |
if((st<solar_sunrise(month,day)-timeinterval/120) || (st>solar_sunset(month,day)+timeinterval/120)) { |
388 |
if(suppress_warnings==0) |
389 |
{ fprintf(stderr, "Warning: sun position too low, printing error sky at %d %d %.3f\n",month,day,hour); } |
390 |
altitude = salt(sd, st); |
391 |
azimuth = sazi(sd, st); |
392 |
print_error_sky(); |
393 |
exit(0); |
394 |
} |
395 |
} |
396 |
else |
397 |
|
398 |
if(st<solar_sunrise(month,day) || st>solar_sunset(month,day)) { |
399 |
if(suppress_warnings==0) |
400 |
{ fprintf(stderr, "Warning: sun altitude below zero at time step %i %i %.2f, printing error sky\n",month,day,hour); } |
401 |
altitude = salt(sd, st); |
402 |
azimuth = sazi(sd, st); |
403 |
print_error_sky(); |
404 |
exit(0); |
405 |
} |
406 |
|
407 |
altitude = salt(sd, st); |
408 |
azimuth = sazi(sd, st); |
409 |
|
410 |
daynumber = (double)jdate(month, day); |
411 |
|
412 |
} |
413 |
|
414 |
|
415 |
|
416 |
|
417 |
|
418 |
if (!cloudy && altitude > 87.*M_PI/180.) { |
419 |
|
420 |
if (suppress_warnings==0) { |
421 |
fprintf(stderr, |
422 |
"%s: warning - sun too close to zenith, reducing altitude to 87 degrees\n", |
423 |
progname); |
424 |
} |
425 |
altitude = 87.*M_PI/180.; |
426 |
} |
427 |
|
428 |
|
429 |
|
430 |
sundir[0] = -sin(azimuth)*cos(altitude); |
431 |
sundir[1] = -cos(azimuth)*cos(altitude); |
432 |
sundir[2] = sin(altitude); |
433 |
|
434 |
|
435 |
/* calculation for the new functions */ |
436 |
sunzenith = 90 - altitude*180/M_PI; |
437 |
|
438 |
|
439 |
/* compute the inputs for the calculation of the light distribution over the sky*/ |
440 |
if (input==0) /* P */ |
441 |
{ |
442 |
check_parametrization(); |
443 |
diffuseirradiance = diffuse_irradiance_from_sky_brightness(); /*diffuse horizontal irradiance*/ |
444 |
directirradiance = direct_irradiance_from_sky_clearness(); |
445 |
check_irradiances(); |
446 |
|
447 |
if (output==0 || output==2) |
448 |
{ |
449 |
diffuseilluminance = diffuseirradiance*glob_h_diffuse_effi_PEREZ();/*diffuse horizontal illuminance*/ |
450 |
directilluminance = directirradiance*direct_n_effi_PEREZ(); |
451 |
check_illuminances(); |
452 |
} |
453 |
} |
454 |
|
455 |
|
456 |
else if (input==1) /* W */ |
457 |
{ |
458 |
check_irradiances(); |
459 |
skybrightness = sky_brightness(); |
460 |
skyclearness = sky_clearness(); |
461 |
|
462 |
check_parametrization(); |
463 |
|
464 |
if (output==0 || output==2) |
465 |
{ |
466 |
diffuseilluminance = diffuseirradiance*glob_h_diffuse_effi_PEREZ();/*diffuse horizontal illuminance*/ |
467 |
directilluminance = directirradiance*direct_n_effi_PEREZ(); |
468 |
check_illuminances(); |
469 |
} |
470 |
|
471 |
} |
472 |
|
473 |
|
474 |
else if (input==2) /* L */ |
475 |
{ |
476 |
check_illuminances(); |
477 |
illu_to_irra_index(); |
478 |
check_parametrization(); |
479 |
} |
480 |
|
481 |
|
482 |
else if (input==3) /* G */ |
483 |
{ |
484 |
if (altitude<=0) |
485 |
{ |
486 |
if (suppress_warnings==0) |
487 |
fprintf(stderr, "Warning: sun altitude < 0, proceed with irradiance values of zero\n"); |
488 |
directirradiance = 0; |
489 |
diffuseirradiance = 0; |
490 |
} else { |
491 |
|
492 |
directirradiance=directirradiance/sin(altitude); |
493 |
} |
494 |
|
495 |
check_irradiances(); |
496 |
skybrightness = sky_brightness(); |
497 |
skyclearness = sky_clearness(); |
498 |
check_parametrization(); |
499 |
|
500 |
if (output==0 || output==2) |
501 |
{ |
502 |
diffuseilluminance = diffuseirradiance*glob_h_diffuse_effi_PEREZ();/*diffuse horizontal illuminance*/ |
503 |
directilluminance = directirradiance*direct_n_effi_PEREZ(); |
504 |
check_illuminances(); |
505 |
} |
506 |
|
507 |
} |
508 |
|
509 |
|
510 |
else if (input==4) /* E */ /* Implementation of the Erbs model. W.Sprenger (04/13) */ |
511 |
{ |
512 |
|
513 |
if (altitude<=0) |
514 |
{ |
515 |
if (suppress_warnings==0 && globalirradiance > 50) |
516 |
fprintf(stderr, "Warning: global irradiance higher than 50 W/m^2 while the sun altitude is lower than zero\n"); |
517 |
globalirradiance = 0; diffuseirradiance = 0; directirradiance = 0; |
518 |
|
519 |
} else { |
520 |
|
521 |
erbs_s0 = solar_constant_e*get_eccentricity()*sin(altitude); |
522 |
|
523 |
if (globalirradiance>erbs_s0) |
524 |
{ |
525 |
if (suppress_warnings==0) |
526 |
fprintf(stderr, "Warning: global irradiance is higher than the time-dependent solar constant s0\n"); |
527 |
globalirradiance=erbs_s0*0.999; |
528 |
} |
529 |
|
530 |
erbs_kt=globalirradiance/erbs_s0; |
531 |
|
532 |
if (erbs_kt<=0.22) diffuseirradiance=globalirradiance*(1-0.09*erbs_kt); |
533 |
else if (erbs_kt<=0.8) diffuseirradiance=globalirradiance*(0.9511-0.1604*erbs_kt+4.388*pow(erbs_kt,2)-16.638*pow(erbs_kt,3)+12.336*pow(erbs_kt,4)); |
534 |
else if (erbs_kt<1) diffuseirradiance=globalirradiance*(0.165); |
535 |
|
536 |
directirradiance=globalirradiance-diffuseirradiance; |
537 |
|
538 |
printf("# erbs_s0, erbs_kt, irr_dir_h, irr_diff: %.3f %.3f %.3f %.3f\n", erbs_s0, erbs_kt, directirradiance, diffuseirradiance); |
539 |
printf("# WARNING: the -E option is only recommended for a rough estimation!\n"); |
540 |
|
541 |
directirradiance=directirradiance/sin(altitude); |
542 |
|
543 |
} |
544 |
|
545 |
check_irradiances(); |
546 |
skybrightness = sky_brightness(); |
547 |
skyclearness = sky_clearness(); |
548 |
check_parametrization(); |
549 |
|
550 |
if (output==0 || output==2) |
551 |
{ |
552 |
diffuseilluminance = diffuseirradiance*glob_h_diffuse_effi_PEREZ();/*diffuse horizontal illuminance*/ |
553 |
directilluminance = directirradiance*direct_n_effi_PEREZ(); |
554 |
check_illuminances(); |
555 |
} |
556 |
|
557 |
} |
558 |
|
559 |
|
560 |
|
561 |
|
562 |
else { fprintf(stderr,"error at the input arguments"); exit(1); } |
563 |
|
564 |
|
565 |
|
566 |
/* normalization factor for the relative sky luminance distribution, diffuse part*/ |
567 |
|
568 |
if ( (lv_mod = malloc(145*sizeof(float))) == NULL) |
569 |
{ |
570 |
fprintf(stderr,"Out of memory in function main"); |
571 |
exit(1); |
572 |
} |
573 |
|
574 |
/* read the angles */ |
575 |
theta_o = defangle_theta; |
576 |
phi_o = defangle_phi; |
577 |
|
578 |
|
579 |
/* parameters for the perez model */ |
580 |
coeff_lum_perez(radians(sunzenith), skyclearness, skybrightness, coeff_perez); |
581 |
|
582 |
|
583 |
|
584 |
/*calculation of the modelled luminance */ |
585 |
for (j=0;j<145;j++) |
586 |
{ |
587 |
theta_phi_to_dzeta_gamma(radians(*(theta_o+j)),radians(*(phi_o+j)),&dzeta,&gamma,radians(sunzenith)); |
588 |
|
589 |
*(lv_mod+j) = calc_rel_lum_perez(dzeta,gamma,radians(sunzenith),skyclearness,skybrightness,coeff_perez); |
590 |
|
591 |
/* fprintf(stderr,"theta, phi, lv_mod %f\t %f\t %f\n", *(theta_o+j),*(phi_o+j),*(lv_mod+j)); */ |
592 |
} |
593 |
|
594 |
/* integration of luminance for the normalization factor, diffuse part of the sky*/ |
595 |
|
596 |
diffnormalization = integ_lv(lv_mod, theta_o); |
597 |
|
598 |
|
599 |
|
600 |
/*normalization coefficient in lumen or in watt*/ |
601 |
if (output==0) |
602 |
{ |
603 |
diffnormalization = diffuseilluminance/diffnormalization/WHTEFFICACY; |
604 |
} |
605 |
else if (output==1) |
606 |
{ |
607 |
diffnormalization = diffuseirradiance/diffnormalization; |
608 |
} |
609 |
else if (output==2) |
610 |
{ |
611 |
diffnormalization = diffuseilluminance/diffnormalization; |
612 |
} |
613 |
|
614 |
else {fprintf(stderr,"Wrong output specification.\n"); exit(1);} |
615 |
|
616 |
|
617 |
|
618 |
|
619 |
/* calculation for the solar source */ |
620 |
if (output==0) |
621 |
solarradiance = directilluminance/(2*M_PI*(1-cos(half_sun_angle*M_PI/180)))/WHTEFFICACY; |
622 |
|
623 |
else if (output==1) |
624 |
solarradiance = directirradiance/(2*M_PI*(1-cos(half_sun_angle*M_PI/180))); |
625 |
|
626 |
else |
627 |
solarradiance = directilluminance/(2*M_PI*(1-cos(half_sun_angle*M_PI/180))); |
628 |
|
629 |
|
630 |
|
631 |
/* Compute the ground radiance */ |
632 |
zenithbr=calc_rel_lum_perez(0.0,radians(sunzenith),radians(sunzenith),skyclearness,skybrightness,coeff_perez); |
633 |
zenithbr*=diffnormalization; |
634 |
|
635 |
if (skyclearness==1) |
636 |
normfactor = 0.777778; |
637 |
|
638 |
if (skyclearness>=6) |
639 |
{ |
640 |
F2 = 0.274*(0.91 + 10.0*exp(-3.0*(M_PI/2.0-altitude)) + 0.45*sundir[2]*sundir[2]); |
641 |
normfactor = normsc()/F2/M_PI; |
642 |
} |
643 |
|
644 |
if ( (skyclearness>1) && (skyclearness<6) ) |
645 |
{ |
646 |
S_INTER=1; |
647 |
F2 = (2.739 + .9891*sin(.3119+2.6*altitude)) * exp(-(M_PI/2.0-altitude)*(.4441+1.48*altitude)); |
648 |
normfactor = normsc()/F2/M_PI; |
649 |
} |
650 |
|
651 |
groundbr = zenithbr*normfactor; |
652 |
|
653 |
if (dosun&&(skyclearness>1)) |
654 |
groundbr += 6.8e-5/M_PI*solarradiance*sundir[2]; |
655 |
|
656 |
groundbr *= gprefl; |
657 |
|
658 |
|
659 |
|
660 |
if(*(c_perez+1)>0) |
661 |
{ |
662 |
if(suppress_warnings==0) |
663 |
{ fprintf(stderr, "Warning: positive Perez parameter B (= %lf), printing error sky\n",*(c_perez+1));} |
664 |
print_error_sky(); |
665 |
exit(0); |
666 |
} |
667 |
|
668 |
|
669 |
return; |
670 |
} |
671 |
|
672 |
|
673 |
|
674 |
|
675 |
|
676 |
double solar_sunset(int month,int day) |
677 |
{ |
678 |
float W; |
679 |
extern double s_latitude; |
680 |
W=-1*(tan(s_latitude)*tan(sdec(jdate(month, day)))); |
681 |
return(12+(M_PI/2 - atan2(W,sqrt(1-W*W)))*180/(M_PI*15)); |
682 |
} |
683 |
|
684 |
|
685 |
|
686 |
|
687 |
double solar_sunrise(int month,int day) |
688 |
{ |
689 |
float W; |
690 |
extern double s_latitude; |
691 |
W=-1*(tan(s_latitude)*tan(sdec(jdate(month, day)))); |
692 |
return(12-(M_PI/2 - atan2(W,sqrt(1-W*W)))*180/(M_PI*15)); |
693 |
} |
694 |
|
695 |
|
696 |
|
697 |
|
698 |
void printsky() |
699 |
{ |
700 |
|
701 |
printf("# Local solar time: %.2f\n", st); |
702 |
printf("# Solar altitude and azimuth: %.1f %.1f\n", altitude*180/M_PI, azimuth*180/M_PI); |
703 |
|
704 |
|
705 |
if (dosun&&(skyclearness>1)) |
706 |
{ |
707 |
printf("\nvoid light solar\n"); |
708 |
printf("0\n0\n"); |
709 |
printf("3 %.3e %.3e %.3e\n", solarradiance, solarradiance, solarradiance); |
710 |
printf("\nsolar source sun\n"); |
711 |
printf("0\n0\n"); |
712 |
printf("4 %f %f %f %f\n", sundir[0], sundir[1], sundir[2], 2*half_sun_angle); |
713 |
} else if (dosun) { |
714 |
printf("\nvoid light solar\n"); |
715 |
printf("0\n0\n"); |
716 |
printf("3 0.0 0.0 0.0\n"); |
717 |
printf("\nsolar source sun\n"); |
718 |
printf("0\n0\n"); |
719 |
printf("4 %f %f %f %f\n", sundir[0], sundir[1], sundir[2], 2*half_sun_angle); |
720 |
} |
721 |
/* print colored output if activated in command line (-C). Based on model from A. Diakite, TU-Berlin. Implemented by J. Wienold, August 26 2018 */ |
722 |
if (color_output==1 && skyclearness < 4.5 && skyclearness >1.065 ) |
723 |
{ |
724 |
fprintf(stderr, " warning: sky clearness(epsilon)= %f \n",skyclearness); |
725 |
fprintf(stderr, " warning: intermediate sky!! \n"); |
726 |
fprintf(stderr, " warning: color model for intermediate sky pending \n"); |
727 |
fprintf(stderr, " warning: no color output ! \n"); |
728 |
color_output=0; |
729 |
} |
730 |
if (color_output==1) |
731 |
{ |
732 |
printf("\nvoid colorfunc skyfunc\n"); |
733 |
printf("4 skybright_r skybright_g skybright_b perezlum_c.cal\n"); |
734 |
printf("0\n"); |
735 |
printf("22 %.3e %.3e %lf %lf %lf %lf %lf %f %f %f %f %f %f %f %f %f %f %f %f %f %f %f\n", diffnormalization, groundbr, |
736 |
*(c_perez+0),*(c_perez+1),*(c_perez+2),*(c_perez+3),*(c_perez+4), |
737 |
sundir[0], sundir[1], sundir[2],skyclearness,locus[0],locus[1],locus[2],locus[3],locus[4],locus[5],locus[6],locus[7],locus[8],locus[9],locus[10]); |
738 |
}else{ |
739 |
printf("\nvoid brightfunc skyfunc\n"); |
740 |
printf("2 skybright perezlum.cal\n"); |
741 |
printf("0\n"); |
742 |
printf("10 %.3e %.3e %lf %lf %lf %lf %lf %f %f %f \n", diffnormalization, groundbr, |
743 |
*(c_perez+0),*(c_perez+1),*(c_perez+2),*(c_perez+3),*(c_perez+4), |
744 |
sundir[0], sundir[1], sundir[2]); |
745 |
} |
746 |
|
747 |
} |
748 |
|
749 |
|
750 |
|
751 |
void print_error_sky() |
752 |
{ |
753 |
|
754 |
|
755 |
sundir[0] = -sin(azimuth)*cos(altitude); |
756 |
sundir[1] = -cos(azimuth)*cos(altitude); |
757 |
sundir[2] = sin(altitude); |
758 |
|
759 |
printf("# Local solar time: %.2f\n", st); |
760 |
printf("# Solar altitude and azimuth: %.1f %.1f\n", altitude*180/M_PI, azimuth*180/M_PI); |
761 |
|
762 |
printf("\nvoid brightfunc skyfunc\n"); |
763 |
printf("2 skybright perezlum.cal\n"); |
764 |
printf("0\n"); |
765 |
printf("10 0.00 0.00 0.000 0.000 0.000 0.000 0.000 %f %f %f \n", sundir[0], sundir[1], sundir[2]); |
766 |
} |
767 |
|
768 |
|
769 |
|
770 |
|
771 |
|
772 |
void printdefaults() /* print default values */ |
773 |
{ |
774 |
printf("-g %f\t\t\t# Ground plane reflectance\n", gprefl); |
775 |
if (zenithbr > 0.0) |
776 |
printf("-b %f\t\t\t# Zenith radiance (watts/ster/m^2\n", zenithbr); |
777 |
else |
778 |
printf("-t %f\t\t\t# Atmospheric betaturbidity\n", betaturbidity); |
779 |
printf("-a %f\t\t\t# Site latitude (degrees)\n", s_latitude*(180/M_PI)); |
780 |
printf("-o %f\t\t\t# Site longitude (degrees)\n", s_longitude*(180/M_PI)); |
781 |
printf("-m %f\t\t\t# Standard meridian (degrees)\n", s_meridian*(180/M_PI)); |
782 |
} |
783 |
|
784 |
|
785 |
|
786 |
|
787 |
void usage_error(char* msg) /* print usage error and quit */ |
788 |
{ |
789 |
if (msg != NULL) |
790 |
fprintf(stderr, "%s: Use error - %s\n\n", progname, msg); |
791 |
fprintf(stderr, "Usage: %s month day hour [-y year] [...]\n", progname); |
792 |
fprintf(stderr, " or: %s -ang altitude azimuth [...]\n", progname); |
793 |
fprintf(stderr, " followed by: -P epsilon delta [options]\n"); |
794 |
fprintf(stderr, " or: [-W|-L|-G] direct_value diffuse_value [options]\n"); |
795 |
fprintf(stderr, " or: -E global_irradiance [options]\n\n"); |
796 |
fprintf(stderr, " Description:\n"); |
797 |
fprintf(stderr, " -P epsilon delta (these are the Perez parameters) \n"); |
798 |
fprintf(stderr, " -W direct-normal-irradiance diffuse-horizontal-irradiance (W/m^2)\n"); |
799 |
fprintf(stderr, " -L direct-normal-illuminance diffuse-horizontal-illuminance (lux)\n"); |
800 |
fprintf(stderr, " -G direct-horizontal-irradiance diffuse-horizontal-irradiance (W/m^2)\n"); |
801 |
fprintf(stderr, " -E global-horizontal-irradiance (W/m^2)\n\n"); |
802 |
fprintf(stderr, " Output specification with option:\n"); |
803 |
fprintf(stderr, " -O [0|1|2] (0=output in W/m^2/sr visible, 1=output in W/m^2/sr solar, 2=output in candela/m^2), default is 0 \n"); |
804 |
fprintf(stderr, " gendaylit version 2.5 (2018/04/18) \n\n"); |
805 |
exit(1); |
806 |
} |
807 |
|
808 |
|
809 |
|
810 |
|
811 |
double normsc() /* compute normalization factor (E0*F2/L0) */ |
812 |
{ |
813 |
static double nfc[2][5] = { |
814 |
/* clear sky approx. */ |
815 |
{2.766521, 0.547665, -0.369832, 0.009237, 0.059229}, |
816 |
/* intermediate sky approx. */ |
817 |
{3.5556, -2.7152, -1.3081, 1.0660, 0.60227}, |
818 |
}; |
819 |
register double *nf; |
820 |
double x, nsc; |
821 |
register int i; |
822 |
/* polynomial approximation */ |
823 |
nf = nfc[S_INTER]; |
824 |
x = (altitude - M_PI/4.0)/(M_PI/4.0); |
825 |
nsc = nf[i=4]; |
826 |
while (i--) |
827 |
nsc = nsc*x + nf[i]; |
828 |
|
829 |
return(nsc); |
830 |
} |
831 |
|
832 |
|
833 |
|
834 |
|
835 |
|
836 |
void printhead(int ac, char** av) /* print command header */ |
837 |
{ |
838 |
putchar('#'); |
839 |
while (ac--) { |
840 |
putchar(' '); |
841 |
fputs(*av++, stdout); |
842 |
} |
843 |
putchar('\n'); |
844 |
} |
845 |
|
846 |
|
847 |
|
848 |
|
849 |
|
850 |
|
851 |
/* Perez models */ |
852 |
|
853 |
/* Perez global horizontal luminous efficacy model */ |
854 |
double glob_h_effi_PEREZ() |
855 |
{ |
856 |
|
857 |
double value; |
858 |
double category_bounds[10], a[10], b[10], c[10], d[10]; |
859 |
int category_total_number, category_number, i; |
860 |
|
861 |
check_parametrization(); |
862 |
|
863 |
|
864 |
/*if ((skyclearness<skyclearinf || skyclearness>skyclearsup || skybrightness<skybriginf || skybrightness>skybrigsup) && suppress_warnings==0) |
865 |
fprintf(stderr, "Warning: skyclearness or skybrightness out of range in function glob_h_effi_PEREZ \n"); */ |
866 |
|
867 |
|
868 |
/* initialize category bounds (clearness index bounds) */ |
869 |
|
870 |
category_total_number = 8; |
871 |
|
872 |
category_bounds[1] = 1; |
873 |
category_bounds[2] = 1.065; |
874 |
category_bounds[3] = 1.230; |
875 |
category_bounds[4] = 1.500; |
876 |
category_bounds[5] = 1.950; |
877 |
category_bounds[6] = 2.800; |
878 |
category_bounds[7] = 4.500; |
879 |
category_bounds[8] = 6.200; |
880 |
category_bounds[9] = 12.01; |
881 |
|
882 |
|
883 |
/* initialize model coefficients */ |
884 |
a[1] = 96.63; |
885 |
a[2] = 107.54; |
886 |
a[3] = 98.73; |
887 |
a[4] = 92.72; |
888 |
a[5] = 86.73; |
889 |
a[6] = 88.34; |
890 |
a[7] = 78.63; |
891 |
a[8] = 99.65; |
892 |
|
893 |
b[1] = -0.47; |
894 |
b[2] = 0.79; |
895 |
b[3] = 0.70; |
896 |
b[4] = 0.56; |
897 |
b[5] = 0.98; |
898 |
b[6] = 1.39; |
899 |
b[7] = 1.47; |
900 |
b[8] = 1.86; |
901 |
|
902 |
c[1] = 11.50; |
903 |
c[2] = 1.79; |
904 |
c[3] = 4.40; |
905 |
c[4] = 8.36; |
906 |
c[5] = 7.10; |
907 |
c[6] = 6.06; |
908 |
c[7] = 4.93; |
909 |
c[8] = -4.46; |
910 |
|
911 |
d[1] = -9.16; |
912 |
d[2] = -1.19; |
913 |
d[3] = -6.95; |
914 |
d[4] = -8.31; |
915 |
d[5] = -10.94; |
916 |
d[6] = -7.60; |
917 |
d[7] = -11.37; |
918 |
d[8] = -3.15; |
919 |
|
920 |
|
921 |
|
922 |
for (i=1; i<=category_total_number; i++) |
923 |
{ |
924 |
if ( (skyclearness >= category_bounds[i]) && (skyclearness < category_bounds[i+1]) ) |
925 |
category_number = i; |
926 |
} |
927 |
|
928 |
value = a[category_number] + b[category_number]*atm_preci_water + |
929 |
c[category_number]*cos(sunzenith*M_PI/180) + d[category_number]*log(skybrightness); |
930 |
|
931 |
return(value); |
932 |
} |
933 |
|
934 |
|
935 |
|
936 |
|
937 |
/* global horizontal diffuse efficacy model, according to PEREZ */ |
938 |
double glob_h_diffuse_effi_PEREZ() |
939 |
{ |
940 |
double value; |
941 |
double category_bounds[10], a[10], b[10], c[10], d[10]; |
942 |
int category_total_number, category_number, i; |
943 |
|
944 |
check_parametrization(); |
945 |
|
946 |
|
947 |
/*if ((skyclearness<skyclearinf || skyclearness>skyclearsup || skybrightness<skybriginf || skybrightness>skybrigsup) && suppress_warnings==0) |
948 |
fprintf(stderr, "Warning: skyclearness or skybrightness out of range in function glob_h_diffuse_PEREZ \n"); */ |
949 |
|
950 |
/* initialize category bounds (clearness index bounds) */ |
951 |
|
952 |
category_total_number = 8; |
953 |
|
954 |
//XXX: category_bounds > 0.1 |
955 |
category_bounds[1] = 1; |
956 |
category_bounds[2] = 1.065; |
957 |
category_bounds[3] = 1.230; |
958 |
category_bounds[4] = 1.500; |
959 |
category_bounds[5] = 1.950; |
960 |
category_bounds[6] = 2.800; |
961 |
category_bounds[7] = 4.500; |
962 |
category_bounds[8] = 6.200; |
963 |
category_bounds[9] = 12.01; |
964 |
|
965 |
|
966 |
/* initialize model coefficients */ |
967 |
a[1] = 97.24; |
968 |
a[2] = 107.22; |
969 |
a[3] = 104.97; |
970 |
a[4] = 102.39; |
971 |
a[5] = 100.71; |
972 |
a[6] = 106.42; |
973 |
a[7] = 141.88; |
974 |
a[8] = 152.23; |
975 |
|
976 |
b[1] = -0.46; |
977 |
b[2] = 1.15; |
978 |
b[3] = 2.96; |
979 |
b[4] = 5.59; |
980 |
b[5] = 5.94; |
981 |
b[6] = 3.83; |
982 |
b[7] = 1.90; |
983 |
b[8] = 0.35; |
984 |
|
985 |
c[1] = 12.00; |
986 |
c[2] = 0.59; |
987 |
c[3] = -5.53; |
988 |
c[4] = -13.95; |
989 |
c[5] = -22.75; |
990 |
c[6] = -36.15; |
991 |
c[7] = -53.24; |
992 |
c[8] = -45.27; |
993 |
|
994 |
d[1] = -8.91; |
995 |
d[2] = -3.95; |
996 |
d[3] = -8.77; |
997 |
d[4] = -13.90; |
998 |
d[5] = -23.74; |
999 |
d[6] = -28.83; |
1000 |
d[7] = -14.03; |
1001 |
d[8] = -7.98; |
1002 |
|
1003 |
|
1004 |
|
1005 |
category_number = -1; |
1006 |
for (i=1; i<=category_total_number; i++) |
1007 |
{ |
1008 |
if ( (skyclearness >= category_bounds[i]) && (skyclearness < category_bounds[i+1]) ) |
1009 |
category_number = i; |
1010 |
} |
1011 |
|
1012 |
if (category_number == -1) { |
1013 |
if (suppress_warnings==0) |
1014 |
fprintf(stderr, "Warning: sky clearness (= %.3f) too high, printing error sky\n", skyclearness); |
1015 |
print_error_sky(); |
1016 |
exit(0); |
1017 |
} |
1018 |
|
1019 |
|
1020 |
value = a[category_number] + b[category_number]*atm_preci_water + c[category_number]*cos(sunzenith*M_PI/180) + |
1021 |
d[category_number]*log(skybrightness); |
1022 |
|
1023 |
return(value); |
1024 |
|
1025 |
} |
1026 |
|
1027 |
|
1028 |
|
1029 |
|
1030 |
|
1031 |
|
1032 |
/* direct normal efficacy model, according to PEREZ */ |
1033 |
|
1034 |
double direct_n_effi_PEREZ() |
1035 |
|
1036 |
{ |
1037 |
double value; |
1038 |
double category_bounds[10], a[10], b[10], c[10], d[10]; |
1039 |
int category_total_number, category_number, i; |
1040 |
|
1041 |
|
1042 |
/*if ((skyclearness<skyclearinf || skyclearness>skyclearsup || skybrightness<skybriginf || skybrightness>skybrigsup) && suppress_warnings==0) |
1043 |
fprintf(stderr, "Warning: skyclearness or skybrightness out of range in function direct_n_effi_PEREZ \n");*/ |
1044 |
|
1045 |
|
1046 |
/* initialize category bounds (clearness index bounds) */ |
1047 |
|
1048 |
category_total_number = 8; |
1049 |
|
1050 |
category_bounds[1] = 1; |
1051 |
category_bounds[2] = 1.065; |
1052 |
category_bounds[3] = 1.230; |
1053 |
category_bounds[4] = 1.500; |
1054 |
category_bounds[5] = 1.950; |
1055 |
category_bounds[6] = 2.800; |
1056 |
category_bounds[7] = 4.500; |
1057 |
category_bounds[8] = 6.200; |
1058 |
category_bounds[9] = 12.1; |
1059 |
|
1060 |
|
1061 |
/* initialize model coefficients */ |
1062 |
a[1] = 57.20; |
1063 |
a[2] = 98.99; |
1064 |
a[3] = 109.83; |
1065 |
a[4] = 110.34; |
1066 |
a[5] = 106.36; |
1067 |
a[6] = 107.19; |
1068 |
a[7] = 105.75; |
1069 |
a[8] = 101.18; |
1070 |
|
1071 |
b[1] = -4.55; |
1072 |
b[2] = -3.46; |
1073 |
b[3] = -4.90; |
1074 |
b[4] = -5.84; |
1075 |
b[5] = -3.97; |
1076 |
b[6] = -1.25; |
1077 |
b[7] = 0.77; |
1078 |
b[8] = 1.58; |
1079 |
|
1080 |
c[1] = -2.98; |
1081 |
c[2] = -1.21; |
1082 |
c[3] = -1.71; |
1083 |
c[4] = -1.99; |
1084 |
c[5] = -1.75; |
1085 |
c[6] = -1.51; |
1086 |
c[7] = -1.26; |
1087 |
c[8] = -1.10; |
1088 |
|
1089 |
d[1] = 117.12; |
1090 |
d[2] = 12.38; |
1091 |
d[3] = -8.81; |
1092 |
d[4] = -4.56; |
1093 |
d[5] = -6.16; |
1094 |
d[6] = -26.73; |
1095 |
d[7] = -34.44; |
1096 |
d[8] = -8.29; |
1097 |
|
1098 |
|
1099 |
|
1100 |
for (i=1; i<=category_total_number; i++) |
1101 |
{ |
1102 |
if ( (skyclearness >= category_bounds[i]) && (skyclearness < category_bounds[i+1]) ) |
1103 |
category_number = i; |
1104 |
} |
1105 |
|
1106 |
value = a[category_number] + b[category_number]*atm_preci_water + c[category_number]*exp(5.73*sunzenith*M_PI/180 - 5) + d[category_number]*skybrightness; |
1107 |
|
1108 |
if (value < 0) value = 0; |
1109 |
|
1110 |
return(value); |
1111 |
} |
1112 |
|
1113 |
|
1114 |
/*check the range of epsilon and delta indexes of the perez parametrization*/ |
1115 |
void check_parametrization() |
1116 |
{ |
1117 |
|
1118 |
if (skyclearness<skyclearinf || skyclearness>skyclearsup || skybrightness<skybriginf || skybrightness>skybrigsup) |
1119 |
{ |
1120 |
|
1121 |
/* limit sky clearness or sky brightness, 2009 11 13 by J. Wienold */ |
1122 |
|
1123 |
if (skyclearness<skyclearinf){ |
1124 |
/* if (suppress_warnings==0) |
1125 |
fprintf(stderr,"Range warning: sky clearness too low (%lf)\n", skyclearness); */ |
1126 |
skyclearness=skyclearinf; |
1127 |
} |
1128 |
if (skyclearness>skyclearsup){ |
1129 |
/* if (suppress_warnings==0) |
1130 |
fprintf(stderr,"Range warning: sky clearness too high (%lf)\n", skyclearness); */ |
1131 |
skyclearness=skyclearsup-0.001; |
1132 |
} |
1133 |
if (skybrightness<skybriginf){ |
1134 |
/* if (suppress_warnings==0) |
1135 |
fprintf(stderr,"Range warning: sky brightness too low (%lf)\n", skybrightness); */ |
1136 |
skybrightness=skybriginf; |
1137 |
} |
1138 |
if (skybrightness>skybrigsup){ |
1139 |
/* if (suppress_warnings==0) |
1140 |
fprintf(stderr,"Range warning: sky brightness too high (%lf)\n", skybrightness); */ |
1141 |
skybrightness=skybrigsup; |
1142 |
} |
1143 |
|
1144 |
return; } |
1145 |
else return; |
1146 |
} |
1147 |
|
1148 |
|
1149 |
|
1150 |
|
1151 |
|
1152 |
/* validity of the direct and diffuse components */ |
1153 |
void check_illuminances() |
1154 |
{ |
1155 |
if (directilluminance < 0) { |
1156 |
if(suppress_warnings==0) |
1157 |
{ fprintf(stderr,"Warning: direct illuminance < 0. Using 0.0\n"); } |
1158 |
directilluminance = 0.0; |
1159 |
} |
1160 |
if (diffuseilluminance < 0) { |
1161 |
if(suppress_warnings==0) |
1162 |
{ fprintf(stderr,"Warning: diffuse illuminance < 0. Using 0.0\n"); } |
1163 |
diffuseilluminance = 0.0; |
1164 |
} |
1165 |
|
1166 |
if (directilluminance+diffuseilluminance==0 && altitude > 0) { |
1167 |
if(suppress_warnings==0) |
1168 |
{ fprintf(stderr,"Warning: zero illuminance at sun altitude > 0, printing error sky\n"); } |
1169 |
print_error_sky(); |
1170 |
exit(0); |
1171 |
} |
1172 |
|
1173 |
if (directilluminance > solar_constant_l) { |
1174 |
if(suppress_warnings==0) |
1175 |
{ fprintf(stderr,"Warning: direct illuminance exceeds solar constant\n"); } |
1176 |
print_error_sky(); |
1177 |
exit(0); |
1178 |
} |
1179 |
} |
1180 |
|
1181 |
|
1182 |
void check_irradiances() |
1183 |
{ |
1184 |
if (directirradiance < 0) { |
1185 |
if(suppress_warnings==0) |
1186 |
{ fprintf(stderr,"Warning: direct irradiance < 0. Using 0.0\n"); } |
1187 |
directirradiance = 0.0; |
1188 |
} |
1189 |
if (diffuseirradiance < 0) { |
1190 |
if(suppress_warnings==0) |
1191 |
{ fprintf(stderr,"Warning: diffuse irradiance < 0. Using 0.0\n"); } |
1192 |
diffuseirradiance = 0.0; |
1193 |
} |
1194 |
|
1195 |
if (directirradiance+diffuseirradiance==0 && altitude > 0) { |
1196 |
if(suppress_warnings==0) |
1197 |
{ fprintf(stderr,"Warning: zero irradiance at sun altitude > 0, printing error sky\n"); } |
1198 |
print_error_sky(); |
1199 |
exit(0); |
1200 |
} |
1201 |
|
1202 |
if (directirradiance > solar_constant_e) { |
1203 |
if(suppress_warnings==0) |
1204 |
{ fprintf(stderr,"Warning: direct irradiance exceeds solar constant\n"); } |
1205 |
print_error_sky(); |
1206 |
exit(0); |
1207 |
} |
1208 |
} |
1209 |
|
1210 |
|
1211 |
|
1212 |
/* Perez sky's brightness */ |
1213 |
double sky_brightness() |
1214 |
{ |
1215 |
double value; |
1216 |
|
1217 |
value = diffuseirradiance * air_mass() / ( solar_constant_e*get_eccentricity()); |
1218 |
|
1219 |
return(value); |
1220 |
} |
1221 |
|
1222 |
|
1223 |
/* Perez sky's clearness */ |
1224 |
double sky_clearness() |
1225 |
{ |
1226 |
double value; |
1227 |
|
1228 |
value = ( (diffuseirradiance + directirradiance)/(diffuseirradiance) + 1.041*sunzenith*M_PI/180*sunzenith*M_PI/180*sunzenith*M_PI/180 ) / (1 + 1.041*sunzenith*M_PI/180*sunzenith*M_PI/180*sunzenith*M_PI/180) ; |
1229 |
|
1230 |
return(value); |
1231 |
} |
1232 |
|
1233 |
|
1234 |
|
1235 |
/* diffus horizontal irradiance from Perez sky's brightness */ |
1236 |
double diffuse_irradiance_from_sky_brightness() |
1237 |
{ |
1238 |
double value; |
1239 |
|
1240 |
value = skybrightness / air_mass() * ( solar_constant_e*get_eccentricity()); |
1241 |
|
1242 |
return(value); |
1243 |
} |
1244 |
|
1245 |
|
1246 |
/* direct normal irradiance from Perez sky's clearness */ |
1247 |
double direct_irradiance_from_sky_clearness() |
1248 |
{ |
1249 |
double value; |
1250 |
|
1251 |
value = diffuse_irradiance_from_sky_brightness(); |
1252 |
value = value * ( (skyclearness-1) * (1+1.041*sunzenith*M_PI/180*sunzenith*M_PI/180*sunzenith*M_PI/180) ); |
1253 |
|
1254 |
return(value); |
1255 |
} |
1256 |
|
1257 |
|
1258 |
|
1259 |
|
1260 |
void illu_to_irra_index() |
1261 |
{ |
1262 |
double test1=0.1, test2=0.1, d_eff; |
1263 |
int counter=0; |
1264 |
|
1265 |
diffuseirradiance = diffuseilluminance*solar_constant_e/(solar_constant_l); |
1266 |
directirradiance = directilluminance*solar_constant_e/(solar_constant_l); |
1267 |
skyclearness = sky_clearness(); |
1268 |
skybrightness = sky_brightness(); |
1269 |
check_parametrization(); |
1270 |
|
1271 |
|
1272 |
while ( ((fabs(diffuseirradiance-test1)>10) || (fabs(directirradiance-test2)>10) |
1273 |
|| (!(skyclearness<skyclearinf || skyclearness>skyclearsup)) |
1274 |
|| (!(skybrightness<skybriginf || skybrightness>skybrigsup)) ) |
1275 |
&& !(counter==9) ) |
1276 |
{ |
1277 |
|
1278 |
test1=diffuseirradiance; |
1279 |
test2=directirradiance; |
1280 |
counter++; |
1281 |
|
1282 |
diffuseirradiance = diffuseilluminance/glob_h_diffuse_effi_PEREZ(); |
1283 |
d_eff = direct_n_effi_PEREZ(); |
1284 |
|
1285 |
|
1286 |
if (d_eff < 0.1) |
1287 |
directirradiance = 0; |
1288 |
else |
1289 |
directirradiance = directilluminance/d_eff; |
1290 |
|
1291 |
skybrightness = sky_brightness(); |
1292 |
skyclearness = sky_clearness(); |
1293 |
check_parametrization(); |
1294 |
|
1295 |
} |
1296 |
|
1297 |
|
1298 |
return; |
1299 |
} |
1300 |
|
1301 |
static int get_numlin(float epsilon) |
1302 |
{ |
1303 |
if (epsilon < 1.065) |
1304 |
return 0; |
1305 |
else if (epsilon < 1.230) |
1306 |
return 1; |
1307 |
else if (epsilon < 1.500) |
1308 |
return 2; |
1309 |
else if (epsilon < 1.950) |
1310 |
return 3; |
1311 |
else if (epsilon < 2.800) |
1312 |
return 4; |
1313 |
else if (epsilon < 4.500) |
1314 |
return 5; |
1315 |
else if (epsilon < 6.200) |
1316 |
return 6; |
1317 |
return 7; |
1318 |
} |
1319 |
|
1320 |
/* sky luminance perez model */ |
1321 |
double calc_rel_lum_perez(double dzeta,double gamma,double Z,double epsilon,double Delta,float coeff_perez[]) |
1322 |
{ |
1323 |
|
1324 |
float x[5][4]; |
1325 |
int i,j,num_lin; |
1326 |
double c_perez[5]; |
1327 |
|
1328 |
if ( (epsilon < skyclearinf) || (epsilon >= skyclearsup) ) |
1329 |
{ |
1330 |
fprintf(stderr,"Error: epsilon out of range in function calc_rel_lum_perez!\n"); |
1331 |
exit(1); |
1332 |
} |
1333 |
|
1334 |
/* correction de modele de Perez solar energy ...*/ |
1335 |
if ( (epsilon > 1.065) && (epsilon < 2.8) ) |
1336 |
{ |
1337 |
if ( Delta < 0.2 ) Delta = 0.2; |
1338 |
} |
1339 |
|
1340 |
|
1341 |
num_lin = get_numlin(epsilon); |
1342 |
|
1343 |
for (i=0;i<5;i++) |
1344 |
for (j=0;j<4;j++) |
1345 |
{ |
1346 |
x[i][j] = *(coeff_perez + 20*num_lin + 4*i +j); |
1347 |
/* fprintf(stderr,"x %d %d vaut %f\n",i,j,x[i][j]); */ |
1348 |
} |
1349 |
|
1350 |
|
1351 |
if (num_lin) |
1352 |
{ |
1353 |
for (i=0;i<5;i++) |
1354 |
c_perez[i] = x[i][0] + x[i][1]*Z + Delta * (x[i][2] + x[i][3]*Z); |
1355 |
} |
1356 |
else |
1357 |
{ |
1358 |
c_perez[0] = x[0][0] + x[0][1]*Z + Delta * (x[0][2] + x[0][3]*Z); |
1359 |
c_perez[1] = x[1][0] + x[1][1]*Z + Delta * (x[1][2] + x[1][3]*Z); |
1360 |
c_perez[4] = x[4][0] + x[4][1]*Z + Delta * (x[4][2] + x[4][3]*Z); |
1361 |
c_perez[2] = exp( pow(Delta*(x[2][0]+x[2][1]*Z),x[2][2])) - x[2][3]; |
1362 |
c_perez[3] = -exp( Delta*(x[3][0]+x[3][1]*Z) )+x[3][2]+Delta*x[3][3]; |
1363 |
} |
1364 |
|
1365 |
|
1366 |
return (1 + c_perez[0]*exp(c_perez[1]/cos(dzeta)) ) * |
1367 |
(1 + c_perez[2]*exp(c_perez[3]*gamma) + |
1368 |
c_perez[4]*cos(gamma)*cos(gamma) ); |
1369 |
} |
1370 |
|
1371 |
|
1372 |
|
1373 |
/* coefficients for the sky luminance perez model */ |
1374 |
void coeff_lum_perez(double Z, double epsilon, double Delta, float coeff_perez[]) |
1375 |
{ |
1376 |
float x[5][4]; |
1377 |
int i,j,num_lin; |
1378 |
|
1379 |
if ( (epsilon < skyclearinf) || (epsilon >= skyclearsup) ) |
1380 |
{ |
1381 |
fprintf(stderr,"Error: epsilon out of range in function coeff_lum_perez!\n"); |
1382 |
exit(1); |
1383 |
} |
1384 |
|
1385 |
/* correction du modele de Perez solar energy ...*/ |
1386 |
if ( (epsilon > 1.065) && (epsilon < 2.8) ) |
1387 |
{ |
1388 |
if ( Delta < 0.2 ) Delta = 0.2; |
1389 |
} |
1390 |
|
1391 |
|
1392 |
num_lin = get_numlin(epsilon); |
1393 |
|
1394 |
/*fprintf(stderr,"numlin %d\n", num_lin);*/ |
1395 |
|
1396 |
for (i=0;i<5;i++) |
1397 |
for (j=0;j<4;j++) |
1398 |
{ |
1399 |
x[i][j] = *(coeff_perez + 20*num_lin + 4*i +j); |
1400 |
/* printf("x %d %d vaut %f\n",i,j,x[i][j]); */ |
1401 |
} |
1402 |
|
1403 |
|
1404 |
if (num_lin) |
1405 |
{ |
1406 |
for (i=0;i<5;i++) |
1407 |
*(c_perez+i) = x[i][0] + x[i][1]*Z + Delta * (x[i][2] + x[i][3]*Z); |
1408 |
|
1409 |
} |
1410 |
else |
1411 |
{ |
1412 |
*(c_perez+0) = x[0][0] + x[0][1]*Z + Delta * (x[0][2] + x[0][3]*Z); |
1413 |
*(c_perez+1) = x[1][0] + x[1][1]*Z + Delta * (x[1][2] + x[1][3]*Z); |
1414 |
*(c_perez+4) = x[4][0] + x[4][1]*Z + Delta * (x[4][2] + x[4][3]*Z); |
1415 |
*(c_perez+2) = exp( pow(Delta*(x[2][0]+x[2][1]*Z),x[2][2])) - x[2][3]; |
1416 |
*(c_perez+3) = -exp( Delta*(x[3][0]+x[3][1]*Z) )+x[3][2]+Delta*x[3][3]; |
1417 |
|
1418 |
|
1419 |
} |
1420 |
|
1421 |
|
1422 |
return; |
1423 |
} |
1424 |
|
1425 |
|
1426 |
|
1427 |
/* degrees into radians */ |
1428 |
double radians(double degres) |
1429 |
{ |
1430 |
return degres*M_PI/180.0; |
1431 |
} |
1432 |
|
1433 |
|
1434 |
/* radian into degrees */ |
1435 |
double degres(double radians) |
1436 |
{ |
1437 |
return radians/M_PI*180.0; |
1438 |
} |
1439 |
|
1440 |
|
1441 |
/* calculation of the angles dzeta and gamma */ |
1442 |
void theta_phi_to_dzeta_gamma(double theta,double phi,double *dzeta,double *gamma, double Z) |
1443 |
{ |
1444 |
*dzeta = theta; /* dzeta = phi */ |
1445 |
if ( (cos(Z)*cos(theta)+sin(Z)*sin(theta)*cos(phi)) > 1 && (cos(Z)*cos(theta)+sin(Z)*sin(theta)*cos(phi) < 1.1 ) ) |
1446 |
*gamma = 0; |
1447 |
else if ( (cos(Z)*cos(theta)+sin(Z)*sin(theta)*cos(phi)) > 1.1 ) |
1448 |
{ |
1449 |
printf("error in calculation of gamma (angle between point and sun"); |
1450 |
exit(1); |
1451 |
} |
1452 |
else |
1453 |
*gamma = acos(cos(Z)*cos(theta)+sin(Z)*sin(theta)*cos(phi)); |
1454 |
} |
1455 |
|
1456 |
|
1457 |
|
1458 |
double integ_lv(float *lv,float *theta) |
1459 |
{ |
1460 |
int i; |
1461 |
double buffer=0.0; |
1462 |
|
1463 |
for (i=0;i<145;i++) |
1464 |
{ |
1465 |
buffer += (*(lv+i))*cos(radians(*(theta+i))); |
1466 |
} |
1467 |
|
1468 |
return buffer*2*M_PI/144; |
1469 |
} |
1470 |
|
1471 |
|
1472 |
|
1473 |
/* enter day number(double), return E0 = square(R0/R): eccentricity correction factor */ |
1474 |
|
1475 |
double get_eccentricity() |
1476 |
{ |
1477 |
double day_angle; |
1478 |
double E0; |
1479 |
|
1480 |
day_angle = 2*M_PI*(daynumber - 1)/365; |
1481 |
E0 = 1.00011+0.034221*cos(day_angle)+0.00128*sin(day_angle)+ |
1482 |
0.000719*cos(2*day_angle)+0.000077*sin(2*day_angle); |
1483 |
|
1484 |
return (E0); |
1485 |
} |
1486 |
|
1487 |
|
1488 |
/* enter sunzenith angle (degrees) return relative air mass (double) */ |
1489 |
double air_mass() |
1490 |
{ |
1491 |
double m; |
1492 |
if (sunzenith>90) |
1493 |
{ |
1494 |
if(suppress_warnings==0) |
1495 |
{ fprintf(stderr, "Warning: air mass has reached the maximal value\n"); } |
1496 |
sunzenith=90; |
1497 |
} |
1498 |
m = 1/( cos(sunzenith*M_PI/180)+0.15*exp( log(93.885-sunzenith)*(-1.253) ) ); |
1499 |
return(m); |
1500 |
} |
1501 |
|
1502 |
|
1503 |
|