src/cv/pabopto2bsdf.c

#ifndef lint
static const char RCSid[] = "$Id: pabopto2bsdf.c,v 2.36 2019/07/19 17:37:56 greg Exp $";
#endif
/*
 * Load measured BSDF data in PAB-Opto format.
 * Assumes that surface-normal (Z-axis) faces into room unless -t option given.
 *
 *      G. Ward
 */

#define _USE_MATH_DEFINES
#include <stdlib.h>
#include <ctype.h>
#include <math.h>
#include "rtio.h"
#include "platform.h"
#include "bsdfrep.h"
                                /* global argv[0] */
char                    *progname;

typedef struct {
        const char      *fname;         /* input file path */
        double          theta, phi;     /* input angles (degrees) */
        double          up_phi;         /* azimuth for "up" direction */
        int             igp[2];         /* input grid position */
        int             isDSF;          /* data is DSF (rather than BSDF)? */
        int             nspec;          /* number of spectral samples */
        long            dstart;         /* data start offset in file */
} PGINPUT;

PGINPUT         *inpfile;       /* input files sorted by incidence */

int             rev_orient = 0; /* shall we reverse surface orientation? */

/* Compare incident angles */
static int
cmp_indir(const void *p1, const void *p2)
{
        const PGINPUT   *inp1 = (const PGINPUT *)p1;
        const PGINPUT   *inp2 = (const PGINPUT *)p2;
        int             ydif = inp1->igp[1] - inp2->igp[1];
        
        if (ydif)
                return(ydif);

        return(inp1->igp[0] - inp2->igp[0]);
}

/* Assign grid position from theta and phi */
static void
set_grid_pos(PGINPUT *pip)
{
        FVECT   dv;

        if (pip->theta <= FTINY) {
                pip->igp[0] = pip->igp[1] = grid_res/2 - 1;
                return;
        }
        dv[2] = sin(M_PI/180.*pip->theta);
        dv[0] = cos(M_PI/180.*pip->phi)*dv[2];
        dv[1] = sin(M_PI/180.*pip->phi)*dv[2];
        dv[2] = sqrt(1. - dv[2]*dv[2]);
        pos_from_vec(pip->igp, dv);
}

/* Prepare a PAB-Opto input file by reading its header */
static int
init_pabopto_inp(const int i, const char *fname)
{
        FILE    *fp = fopen(fname, "r");
        char    buf[2048];
        int     c;
        
        if (fp == NULL) {
                fputs(fname, stderr);
                fputs(": cannot open\n", stderr);
                return(0);
        }
        inpfile[i].fname = fname;
        inpfile[i].isDSF = -1;
        inpfile[i].nspec = 0;
        inpfile[i].up_phi = 0;
        inpfile[i].theta = inpfile[i].phi = -10001.;
                                /* read header information */
        while ((c = getc(fp)) == '#' || c == EOF) {
                char    typ[64];
                if (fgets(buf, sizeof(buf), fp) == NULL) {
                        fputs(fname, stderr);
                        fputs(": unexpected EOF\n", stderr);
                        fclose(fp);
                        return(0);
                }
                if (sscanf(buf, "sample_name \"%[^\"]\"", bsdf_name) == 1)
                        continue;
                if (sscanf(buf, "colorimetry: %s", typ) == 1) {
                        if (!strcasecmp(typ, "CIE-XYZ"))
                                inpfile[i].nspec = 3;
                        else if (!strcasecmp(typ, "CIE-Y"))
                                inpfile[i].nspec = 1;
                        continue;
                }
                if (sscanf(buf, "format: theta phi %s", typ) == 1) {
                        if (!strcasecmp(typ, "DSF"))
                                inpfile[i].isDSF = 1;
                        else if (!strcasecmp(typ, "BSDF") ||
                                        !strcasecmp(typ, "BRDF") ||
                                        !strcasecmp(typ, "BTDF"))
                                inpfile[i].isDSF = 0;
                        continue;
                }
                if (sscanf(buf, "upphi %lf", &inpfile[i].up_phi) == 1)
                        continue;
                if (sscanf(buf, "intheta %lf", &inpfile[i].theta) == 1)
                        continue;
                if (sscanf(buf, "inphi %lf", &inpfile[i].phi) == 1)
                        continue;
                if (sscanf(buf, "incident_angle %lf %lf",
                                &inpfile[i].theta, &inpfile[i].phi) == 2)
                        continue;
        }
        inpfile[i].dstart = ftell(fp) - 1;
        fclose(fp);
        if (inpfile[i].isDSF < 0) {
                fputs(fname, stderr);
                fputs(": unknown format\n", stderr);
                return(0);
        }
        if ((inpfile[i].theta < -10000.) | (inpfile[i].phi < -10000.)) {
                fputs(fname, stderr);
                fputs(": unknown incident angle\n", stderr);
                return(0);
        }
        if (rev_orient) {       /* reverse Z-axis to face outside */
                inpfile[i].theta = 180. - inpfile[i].theta;
                inpfile[i].phi = 360. - inpfile[i].phi;
        }
                                /* convert to Y-up orientation */
        inpfile[i].phi += 90.-inpfile[i].up_phi;
                                /* convert angle to grid position */
        set_grid_pos(&inpfile[i]);
        return(1);
}

/* Load a set of measurements corresponding to a particular incident angle */
static int
add_pabopto_inp(const int i)
{
        FILE            *fp = fopen(inpfile[i].fname, "r");
        double          theta_out, phi_out, val[3];
        int             n, c;
        
        if (fp == NULL || fseek(fp, inpfile[i].dstart, 0) == EOF) {
                fputs(inpfile[i].fname, stderr);
                fputs(": cannot open\n", stderr);
                return(0);
        }
                                        /* prepare input grid */
        if (!i || cmp_indir(&inpfile[i-1], &inpfile[i])) {
                if (i)                  /* process previous incidence */
                        make_rbfrep();
#ifdef DEBUG
                fprintf(stderr, "New incident (theta,phi)=(%.1f,%.1f)\n",
                                        inpfile[i].theta, inpfile[i].phi);
#endif
                if (inpfile[i].nspec)
                        set_spectral_samples(inpfile[i].nspec);
                new_bsdf_data(inpfile[i].theta, inpfile[i].phi);
        }
#ifdef DEBUG
        fprintf(stderr, "Loading measurements from '%s'...\n", inpfile[i].fname);
#endif
                                        /* read scattering data */
        while (fscanf(fp, "%lf %lf %lf", &theta_out, &phi_out, val) == 3) {
                for (n = 1; n < inpfile[i].nspec; n++)
                        if (fscanf(fp, "%lf", val+n) != 1) {
                                fprintf(stderr, "%s: warning: unexpected EOF\n",
                                                inpfile[i].fname);
                                fclose(fp);
                                return(1);
                        }
                if (rev_orient) {       /* reverse Z-axis to face outside */
                        theta_out = 180. - theta_out;
                        phi_out = 360. - phi_out;
                }
                phi_out += 90.-inpfile[i].up_phi;
                add_bsdf_data(theta_out, phi_out, val, inpfile[i].isDSF);
        }
        n = 0;
        while ((c = getc(fp)) != EOF)
                n += !isspace(c);
        if (n) 
                fprintf(stderr,
                        "%s: warning: %d unexpected characters past EOD\n",
                                inpfile[i].fname, n);
        fclose(fp);
        return(1);
}

#ifndef TEST_MAIN

#define SYM_ILL         '?'             /* illegal symmetry value */
#define SYM_ISO         'I'             /* isotropic */
#define SYM_QUAD        'Q'             /* quadrilateral symmetry */
#define SYM_BILAT       'B'             /* bilateral symmetry */
#define SYM_ANISO       'A'             /* anisotropic */
#define SYM_UP          'U'             /* "up-down" (180°) symmetry */

static const char       quadrant_rep[16][16] = {
                                "in-plane","0-90","90-180","0-180",
                                "180-270","0-90+180-270","90-270",
                                "0-270","270-360","270-90",
                                "90-180+270-360","270-180","180-360",
                                "180-90","90-360","0-360"
                        };
static const char       quadrant_sym[16] = {
                                SYM_ISO, SYM_QUAD, SYM_QUAD, SYM_BILAT,
                                SYM_QUAD, SYM_ILL, SYM_BILAT, SYM_ILL,
                                SYM_QUAD, SYM_BILAT, SYM_ILL, SYM_ILL,
                                SYM_BILAT, SYM_ILL, SYM_ILL, SYM_ANISO
                        };

/* Read in PAB-Opto BSDF files and output RBF interpolant */
int
main(int argc, char *argv[])
{
        extern int      nprocs;
        const char      *symmetry = "0";
        int             ninpfiles, totinc;
        int             a, i;
                                                /* start header */
        SET_FILE_BINARY(stdout);
        newheader("RADIANCE", stdout);
        printargs(argc, argv, stdout);
        fputnow(stdout);
        progname = argv[0];                     /* get options */
        for (a = 1; a < argc && argv[a][0] == '-'; a++)
                switch (argv[a][1]) {
                case 't':
                        rev_orient = !rev_orient;
                        break;
                case 'n':
                        nprocs = atoi(argv[++a]);
                        break;
                case 's':
                        symmetry = argv[++a];
                        break;
                default:
                        goto userr;
                }
        totinc = ninpfiles = argc - a;          /* initialize & sort inputs */
        if (ninpfiles < 2)
                goto userr;
        if (toupper(symmetry[0]) == SYM_UP)     /* special case for "up" symmetry */
                totinc += ninpfiles;
        inpfile = (PGINPUT *)malloc(sizeof(PGINPUT)*totinc);
        if (inpfile == NULL)
                return(1);
        for (i = 0; i < ninpfiles; i++)
                if (!init_pabopto_inp(i, argv[a+i]))
                        return(1);

        for (i = ninpfiles; i < totinc; i++) {  /* copy for "up" symmetry */
                inpfile[i] = inpfile[i-ninpfiles];
                inpfile[i].phi += 180.;         /* invert duplicate data */
                inpfile[i].up_phi -= 180.;
                set_grid_pos(&inpfile[i]);      /* grid location for sorting */
        }
        qsort(inpfile, ninpfiles, sizeof(PGINPUT), cmp_indir);
                                                /* compile measurements */
        for (i = 0; i < totinc; i++)
                if (!add_pabopto_inp(i))
                        return(1);
        make_rbfrep();                          /* process last data set */
                                                /* check input symmetry */
        switch (toupper(symmetry[0])) {
        case '0':                               /* unspecified symmetry */
                if (quadrant_sym[inp_coverage] != SYM_ILL)
                        break;                  /* anything legal goes */
                fprintf(stderr, "%s: unsupported phi coverage (%s)\n",
                                progname, quadrant_rep[inp_coverage]);
                return(1);
        case SYM_UP:                            /* faux "up" symmetry */
                if (quadrant_sym[inp_coverage] == SYM_ANISO)
                        break;
                /* fall through */
        case SYM_ISO:                           /* usual symmetry types */
        case SYM_QUAD:
        case SYM_BILAT:
        case SYM_ANISO:
                if (quadrant_sym[inp_coverage] == toupper(symmetry[0]))
                        break;                  /* matches spec */
                fprintf(stderr,
                "%s: phi coverage (%s) does not match requested '%s' symmetry\n",
                                progname, quadrant_rep[inp_coverage], symmetry);
                return(1);
        default:
                fprintf(stderr,
  "%s: -s option must be Isotropic, Quadrilateral, Bilateral, Up, or Anisotropic\n",
                                progname);
                return(1);
        }
#ifdef DEBUG
        fprintf(stderr, "Input phi coverage (%s) has '%c' symmetry\n",
                                quadrant_rep[inp_coverage],
                                quadrant_sym[inp_coverage]);
#endif
        build_mesh();                           /* create interpolation */
        save_bsdf_rep(stdout);                  /* write it out */
        return(0);
userr:
        fprintf(stderr, "Usage: %s [-t][-n nproc][-s symmetry] meas1.dat meas2.dat .. > bsdf.sir\n",
                                        progname);
        return(1);
}

#else           /* TEST_MAIN */

/* Test main produces a Radiance model from the given input file */
int
main(int argc, char *argv[])
{
        PGINPUT pginp;
        char    buf[128];
        FILE    *pfp;
        double  bsdf, min_log;
        FVECT   dir;
        int     i, j, n;

        progname = argv[0];
        if (argc != 2) {
                fprintf(stderr, "Usage: %s input.dat > output.rad\n", progname);
                return(1);
        }
        inpfile = &pginp;
        if (!init_pabopto_inp(0, argv[1]) || !add_pabopto_inp(0))
                return(1);
                                                /* reduce data set */
        if (make_rbfrep() == NULL) {
                fprintf(stderr, "%s: nothing to plot!\n", progname);
                exit(1);
        }
#ifdef DEBUG
        fprintf(stderr, "Minimum BSDF = %.4f\n", bsdf_min);
#endif
        min_log = log(bsdf_min*.5 + 1e-5);
#if 1                                           /* produce spheres at meas. */
        puts("void plastic yellow\n0\n0\n5 .6 .4 .01 .04 .08\n");
        n = 0;
        for (i = 0; i < grid_res; i++)
            for (j = 0; j < grid_res; j++)
                if (dsf_grid[i][j].sum.n > 0) {
                        ovec_from_pos(dir, i, j);
                        bsdf = dsf_grid[i][j].sum.v /
                           ((double)dsf_grid[i][j].sum.n*output_orient*dir[2]);
                        if (bsdf <= bsdf_min*.6)
                                continue;
                        bsdf = log(bsdf + 1e-5) - min_log;
                        ovec_from_pos(dir, i, j);
                        printf("yellow sphere s%04d\n0\n0\n", ++n);
                        printf("4 %.6g %.6g %.6g %.6g\n\n",
                                        dir[0]*bsdf, dir[1]*bsdf, dir[2]*bsdf,
                                        .007*bsdf);
                }
#endif
#if 1                                           /* spheres at RBF peaks */
        puts("void plastic red\n0\n0\n5 .8 .01 .01 .04 .08\n");
        for (n = 0; n < dsf_list->nrbf; n++) {
                RBFVAL  *rbf = &dsf_list->rbfa[n];
                ovec_from_pos(dir, rbf->gx, rbf->gy);
                bsdf = eval_rbfrep(dsf_list, dir);
                bsdf = log(bsdf + 1e-5) - min_log;
                printf("red sphere p%04d\n0\n0\n", ++n);
                printf("4 %.6g %.6g %.6g %.6g\n\n",
                                dir[0]*bsdf, dir[1]*bsdf, dir[2]*bsdf,
                                .011*bsdf);
        }
#endif
#if 1                                           /* output continuous surface */
        puts("void trans tgreen\n0\n0\n7 .7 1 .7 .04 .04 .9 1\n");
        fflush(stdout);
        sprintf(buf, "gensurf tgreen bsdf - - - %d %d", grid_res-1, grid_res-1);
        pfp = popen(buf, "w");
        if (pfp == NULL) {
                fprintf(stderr, "%s: cannot open '| %s'\n", progname, buf);
                return(1);
        }
        for (i = 0; i < grid_res; i++)
            for (j = 0; j < grid_res; j++) {
                ovec_from_pos(dir, i, j);
                bsdf = eval_rbfrep(dsf_list, dir);
                bsdf = log(bsdf + 1e-5) - min_log;
                fprintf(pfp, "%.8e %.8e %.8e\n",
                                dir[0]*bsdf, dir[1]*bsdf, dir[2]*bsdf);
            }
        if (pclose(pfp) != 0)
                return(1);
#endif
        return(0);
}

#endif          /* TEST_MAIN */
Revision:	2.37
Committed:	Mon Feb 15 23:20:22 2021 UTC (3 years, 3 months ago) by greg
Content type:	text/plain
Branch:	MAIN
Changes since 2.36:	+49 -32 lines
Log Message:	feat: Added "up" symmetry for duplicating data @ phi += 180 degrees
#	User	Rev	Content
1	greg	2.1	#ifndef lint
2	greg	2.37	static const char RCSid[] = "$Id: pabopto2bsdf.c,v 2.36 2019/07/19 17:37:56 greg Exp $";
3	greg	2.1	#endif
4			/*
5			* Load measured BSDF data in PAB-Opto format.
6	greg	2.29	* Assumes that surface-normal (Z-axis) faces into room unless -t option given.
7	greg	2.1	*
8			* G. Ward
9			*/
10
11	greg	2.20	#define _USE_MATH_DEFINES
12	greg	2.2	#include <stdlib.h>
13	greg	2.1	#include <ctype.h>
14	greg	2.6	#include <math.h>
15	greg	2.36	#include "rtio.h"
16	greg	2.1	#include "platform.h"
17			#include "bsdfrep.h"
18			/* global argv[0] */
19			char *progname;
20
21	greg	2.2	typedef struct {
22			const char fname; / input file path */
23	greg	2.27	double theta, phi; /* input angles (degrees) */
24			double up_phi; /* azimuth for "up" direction */
25	greg	2.20	int igp[2]; /* input grid position */
26	greg	2.2	int isDSF; /* data is DSF (rather than BSDF)? */
27	greg	2.28	int nspec; /* number of spectral samples */
28	greg	2.2	long dstart; /* data start offset in file */
29			} PGINPUT;
30
31			PGINPUT inpfile; / input files sorted by incidence */
32
33	greg	2.29	int rev_orient = 0; /* shall we reverse surface orientation? */
34
35	greg	2.2	/* Compare incident angles */
36			static int
37	greg	2.20	cmp_indir(const void p1, const void p2)
38	greg	2.2	{
39			const PGINPUT inp1 = (const PGINPUT )p1;
40			const PGINPUT inp2 = (const PGINPUT )p2;
41	greg	2.20	int ydif = inp1->igp[1] - inp2->igp[1];
42	greg	2.2
43	greg	2.20	if (ydif)
44			return(ydif);
45
46			return(inp1->igp[0] - inp2->igp[0]);
47	greg	2.2	}
48
49	greg	2.37	/* Assign grid position from theta and phi */
50			static void
51			set_grid_pos(PGINPUT *pip)
52			{
53			FVECT dv;
54
55			if (pip->theta <= FTINY) {
56			pip->igp[0] = pip->igp[1] = grid_res/2 - 1;
57			return;
58			}
59			dv[2] = sin(M_PI/180.*pip->theta);
60			dv[0] = cos(M_PI/180.pip->phi)dv[2];
61			dv[1] = sin(M_PI/180.pip->phi)dv[2];
62			dv[2] = sqrt(1. - dv[2]*dv[2]);
63			pos_from_vec(pip->igp, dv);
64			}
65
66	greg	2.2	/* Prepare a PAB-Opto input file by reading its header */
67	greg	2.1	static int
68	greg	2.2	init_pabopto_inp(const int i, const char *fname)
69	greg	2.1	{
70			FILE *fp = fopen(fname, "r");
71			char buf[2048];
72	greg	2.2	int c;
73	greg	2.1
74			if (fp == NULL) {
75			fputs(fname, stderr);
76			fputs(": cannot open\n", stderr);
77			return(0);
78			}
79	greg	2.2	inpfile[i].fname = fname;
80			inpfile[i].isDSF = -1;
81	greg	2.28	inpfile[i].nspec = 0;
82	greg	2.27	inpfile[i].up_phi = 0;
83	greg	2.2	inpfile[i].theta = inpfile[i].phi = -10001.;
84	greg	2.1	/* read header information */
85			while ((c = getc(fp)) == '#' \|\| c == EOF) {
86	greg	2.28	char typ[64];
87	greg	2.1	if (fgets(buf, sizeof(buf), fp) == NULL) {
88			fputs(fname, stderr);
89			fputs(": unexpected EOF\n", stderr);
90			fclose(fp);
91			return(0);
92			}
93	greg	2.10	if (sscanf(buf, "sample_name \"%[^\"]\"", bsdf_name) == 1)
94			continue;
95	greg	2.28	if (sscanf(buf, "colorimetry: %s", typ) == 1) {
96			if (!strcasecmp(typ, "CIE-XYZ"))
97			inpfile[i].nspec = 3;
98			else if (!strcasecmp(typ, "CIE-Y"))
99			inpfile[i].nspec = 1;
100			continue;
101			}
102	greg	2.5	if (sscanf(buf, "format: theta phi %s", typ) == 1) {
103	greg	2.28	if (!strcasecmp(typ, "DSF"))
104	greg	2.5	inpfile[i].isDSF = 1;
105	greg	2.28	else if (!strcasecmp(typ, "BSDF") \|\|
106	greg	2.23	!strcasecmp(typ, "BRDF") \|\|
107	greg	2.28	!strcasecmp(typ, "BTDF"))
108	greg	2.5	inpfile[i].isDSF = 0;
109	greg	2.28	continue;
110	greg	2.1	}
111	greg	2.27	if (sscanf(buf, "upphi %lf", &inpfile[i].up_phi) == 1)
112			continue;
113	greg	2.2	if (sscanf(buf, "intheta %lf", &inpfile[i].theta) == 1)
114	greg	2.1	continue;
115	greg	2.2	if (sscanf(buf, "inphi %lf", &inpfile[i].phi) == 1)
116	greg	2.1	continue;
117			if (sscanf(buf, "incident_angle %lf %lf",
118	greg	2.2	&inpfile[i].theta, &inpfile[i].phi) == 2)
119	greg	2.1	continue;
120			}
121	greg	2.2	inpfile[i].dstart = ftell(fp) - 1;
122			fclose(fp);
123			if (inpfile[i].isDSF < 0) {
124	greg	2.1	fputs(fname, stderr);
125			fputs(": unknown format\n", stderr);
126			return(0);
127			}
128	greg	2.2	if ((inpfile[i].theta < -10000.) \| (inpfile[i].phi < -10000.)) {
129			fputs(fname, stderr);
130			fputs(": unknown incident angle\n", stderr);
131			return(0);
132			}
133	greg	2.29	if (rev_orient) { /* reverse Z-axis to face outside */
134			inpfile[i].theta = 180. - inpfile[i].theta;
135			inpfile[i].phi = 360. - inpfile[i].phi;
136			}
137	greg	2.27	/* convert to Y-up orientation */
138			inpfile[i].phi += 90.-inpfile[i].up_phi;
139	greg	2.20	/* convert angle to grid position */
140	greg	2.37	set_grid_pos(&inpfile[i]);
141	greg	2.2	return(1);
142			}
143
144			/* Load a set of measurements corresponding to a particular incident angle */
145			static int
146			add_pabopto_inp(const int i)
147			{
148	greg	2.19	FILE *fp = fopen(inpfile[i].fname, "r");
149	greg	2.28	double theta_out, phi_out, val[3];
150	greg	2.19	int n, c;
151	greg	2.2
152			if (fp == NULL \|\| fseek(fp, inpfile[i].dstart, 0) == EOF) {
153			fputs(inpfile[i].fname, stderr);
154			fputs(": cannot open\n", stderr);
155			return(0);
156			}
157	greg	2.1	/* prepare input grid */
158	greg	2.20	if (!i \|\| cmp_indir(&inpfile[i-1], &inpfile[i])) {
159			if (i) /* process previous incidence */
160	greg	2.2	make_rbfrep();
161			#ifdef DEBUG
162	greg	2.22	fprintf(stderr, "New incident (theta,phi)=(%.1f,%.1f)\n",
163	greg	2.2	inpfile[i].theta, inpfile[i].phi);
164			#endif
165	greg	2.28	if (inpfile[i].nspec)
166			set_spectral_samples(inpfile[i].nspec);
167	greg	2.2	new_bsdf_data(inpfile[i].theta, inpfile[i].phi);
168			}
169	greg	2.3	#ifdef DEBUG
170			fprintf(stderr, "Loading measurements from '%s'...\n", inpfile[i].fname);
171			#endif
172	greg	2.2	/* read scattering data */
173	greg	2.28	while (fscanf(fp, "%lf %lf %lf", &theta_out, &phi_out, val) == 3) {
174			for (n = 1; n < inpfile[i].nspec; n++)
175			if (fscanf(fp, "%lf", val+n) != 1) {
176			fprintf(stderr, "%s: warning: unexpected EOF\n",
177			inpfile[i].fname);
178			fclose(fp);
179			return(1);
180			}
181	greg	2.29	if (rev_orient) { /* reverse Z-axis to face outside */
182			theta_out = 180. - theta_out;
183			phi_out = 360. - phi_out;
184			}
185	greg	2.37	phi_out += 90.-inpfile[i].up_phi;
186			add_bsdf_data(theta_out, phi_out, val, inpfile[i].isDSF);
187	greg	2.28	}
188	greg	2.1	n = 0;
189			while ((c = getc(fp)) != EOF)
190			n += !isspace(c);
191			if (n)
192			fprintf(stderr,
193			"%s: warning: %d unexpected characters past EOD\n",
194	greg	2.2	inpfile[i].fname, n);
195	greg	2.1	fclose(fp);
196			return(1);
197			}
198
199	greg	2.8	#ifndef TEST_MAIN
200	greg	2.35
201			#define SYM_ILL '?' /* illegal symmetry value */
202			#define SYM_ISO 'I' /* isotropic */
203			#define SYM_QUAD 'Q' /* quadrilateral symmetry */
204			#define SYM_BILAT 'B' /* bilateral symmetry */
205			#define SYM_ANISO 'A' /* anisotropic */
206	greg	2.37	#define SYM_UP 'U' /* "up-down" (180°) symmetry */
207	greg	2.35
208			static const char quadrant_rep[16][16] = {
209			"in-plane","0-90","90-180","0-180",
210			"180-270","0-90+180-270","90-270",
211			"0-270","270-360","270-90",
212			"90-180+270-360","270-180","180-360",
213			"180-90","90-360","0-360"
214			};
215			static const char quadrant_sym[16] = {
216			SYM_ISO, SYM_QUAD, SYM_QUAD, SYM_BILAT,
217			SYM_QUAD, SYM_ILL, SYM_BILAT, SYM_ILL,
218			SYM_QUAD, SYM_BILAT, SYM_ILL, SYM_ILL,
219			SYM_BILAT, SYM_ILL, SYM_ILL, SYM_ANISO
220			};
221
222	greg	2.1	/* Read in PAB-Opto BSDF files and output RBF interpolant */
223			int
224			main(int argc, char *argv[])
225			{
226	greg	2.35	extern int nprocs;
227	greg	2.37	const char *symmetry = "0";
228			int ninpfiles, totinc;
229			int a, i;
230	greg	2.1	/* start header */
231			SET_FILE_BINARY(stdout);
232			newheader("RADIANCE", stdout);
233			printargs(argc, argv, stdout);
234			fputnow(stdout);
235			progname = argv[0]; /* get options */
236	greg	2.37	for (a = 1; a < argc && argv[a][0] == '-'; a++)
237			switch (argv[a][1]) {
238	greg	2.29	case 't':
239			rev_orient = !rev_orient;
240			break;
241	greg	2.1	case 'n':
242	greg	2.37	nprocs = atoi(argv[++a]);
243	greg	2.1	break;
244	greg	2.33	case 's':
245	greg	2.37	symmetry = argv[++a];
246	greg	2.33	break;
247	greg	2.1	default:
248			goto userr;
249			}
250	greg	2.37	totinc = ninpfiles = argc - a; /* initialize & sort inputs */
251	greg	2.2	if (ninpfiles < 2)
252	greg	2.1	goto userr;
253	greg	2.37	if (toupper(symmetry[0]) == SYM_UP) /* special case for "up" symmetry */
254			totinc += ninpfiles;
255			inpfile = (PGINPUT )malloc(sizeof(PGINPUT)totinc);
256	greg	2.2	if (inpfile == NULL)
257			return(1);
258			for (i = 0; i < ninpfiles; i++)
259	greg	2.37	if (!init_pabopto_inp(i, argv[a+i]))
260	greg	2.1	return(1);
261	greg	2.37
262			for (i = ninpfiles; i < totinc; i++) { /* copy for "up" symmetry */
263			inpfile[i] = inpfile[i-ninpfiles];
264			inpfile[i].phi += 180.; /* invert duplicate data */
265			inpfile[i].up_phi -= 180.;
266			set_grid_pos(&inpfile[i]); /* grid location for sorting */
267			}
268	greg	2.25	qsort(inpfile, ninpfiles, sizeof(PGINPUT), cmp_indir);
269	greg	2.2	/* compile measurements */
270	greg	2.37	for (i = 0; i < totinc; i++)
271	greg	2.2	if (!add_pabopto_inp(i))
272			return(1);
273			make_rbfrep(); /* process last data set */
274	greg	2.33	/* check input symmetry */
275			switch (toupper(symmetry[0])) {
276	greg	2.37	case '0': /* unspecified symmetry */
277	greg	2.35	if (quadrant_sym[inp_coverage] != SYM_ILL)
278			break; /* anything legal goes */
279			fprintf(stderr, "%s: unsupported phi coverage (%s)\n",
280			progname, quadrant_rep[inp_coverage]);
281			return(1);
282	greg	2.37	case SYM_UP: /* faux "up" symmetry */
283			if (quadrant_sym[inp_coverage] == SYM_ANISO)
284			break;
285			/* fall through */
286			case SYM_ISO: /* usual symmetry types */
287	greg	2.35	case SYM_QUAD:
288			case SYM_BILAT:
289			case SYM_ANISO:
290			if (quadrant_sym[inp_coverage] == toupper(symmetry[0]))
291			break; /* matches spec */
292			fprintf(stderr,
293			"%s: phi coverage (%s) does not match requested '%s' symmetry\n",
294			progname, quadrant_rep[inp_coverage], symmetry);
295			return(1);
296	greg	2.33	default:
297			fprintf(stderr,
298	greg	2.37	"%s: -s option must be Isotropic, Quadrilateral, Bilateral, Up, or Anisotropic\n",
299	greg	2.33	progname);
300			return(1);
301			}
302			#ifdef DEBUG
303	greg	2.35	fprintf(stderr, "Input phi coverage (%s) has '%c' symmetry\n",
304			quadrant_rep[inp_coverage],
305			quadrant_sym[inp_coverage]);
306	greg	2.33	#endif
307	greg	2.1	build_mesh(); /* create interpolation */
308			save_bsdf_rep(stdout); /* write it out */
309			return(0);
310			userr:
311	greg	2.33	fprintf(stderr, "Usage: %s [-t][-n nproc][-s symmetry] meas1.dat meas2.dat .. > bsdf.sir\n",
312	greg	2.1	progname);
313			return(1);
314			}
315	greg	2.35
316			#else /* TEST_MAIN */
317
318	greg	2.6	/* Test main produces a Radiance model from the given input file */
319			int
320			main(int argc, char *argv[])
321			{
322			PGINPUT pginp;
323			char buf[128];
324			FILE *pfp;
325			double bsdf, min_log;
326			FVECT dir;
327			int i, j, n;
328
329	greg	2.21	progname = argv[0];
330	greg	2.6	if (argc != 2) {
331	greg	2.21	fprintf(stderr, "Usage: %s input.dat > output.rad\n", progname);
332	greg	2.6	return(1);
333			}
334			inpfile = &pginp;
335			if (!init_pabopto_inp(0, argv[1]) \|\| !add_pabopto_inp(0))
336			return(1);
337			/* reduce data set */
338	greg	2.21	if (make_rbfrep() == NULL) {
339			fprintf(stderr, "%s: nothing to plot!\n", progname);
340			exit(1);
341			}
342	greg	2.9	#ifdef DEBUG
343			fprintf(stderr, "Minimum BSDF = %.4f\n", bsdf_min);
344			#endif
345	greg	2.13	min_log = log(bsdf_min*.5 + 1e-5);
346	greg	2.11	#if 1 /* produce spheres at meas. */
347	greg	2.6	puts("void plastic yellow\n0\n0\n5 .6 .4 .01 .04 .08\n");
348			n = 0;
349	greg	2.28	for (i = 0; i < grid_res; i++)
350			for (j = 0; j < grid_res; j++)
351	greg	2.16	if (dsf_grid[i][j].sum.n > 0) {
352	greg	2.6	ovec_from_pos(dir, i, j);
353	greg	2.16	bsdf = dsf_grid[i][j].sum.v /
354	greg	2.24	((double)dsf_grid[i][j].sum.noutput_orientdir[2]);
355	greg	2.6	if (bsdf <= bsdf_min*.6)
356			continue;
357	greg	2.14	bsdf = log(bsdf + 1e-5) - min_log;
358	greg	2.7	ovec_from_pos(dir, i, j);
359			printf("yellow sphere s%04d\n0\n0\n", ++n);
360			printf("4 %.6g %.6g %.6g %.6g\n\n",
361	greg	2.6	dir[0]bsdf, dir[1]bsdf, dir[2]*bsdf,
362	greg	2.7	.007*bsdf);
363	greg	2.6	}
364	greg	2.11	#endif
365			#if 1 /* spheres at RBF peaks */
366			puts("void plastic red\n0\n0\n5 .8 .01 .01 .04 .08\n");
367			for (n = 0; n < dsf_list->nrbf; n++) {
368			RBFVAL *rbf = &dsf_list->rbfa[n];
369			ovec_from_pos(dir, rbf->gx, rbf->gy);
370	greg	2.26	bsdf = eval_rbfrep(dsf_list, dir);
371	greg	2.14	bsdf = log(bsdf + 1e-5) - min_log;
372	greg	2.11	printf("red sphere p%04d\n0\n0\n", ++n);
373			printf("4 %.6g %.6g %.6g %.6g\n\n",
374			dir[0]bsdf, dir[1]bsdf, dir[2]*bsdf,
375			.011*bsdf);
376			}
377			#endif
378			#if 1 /* output continuous surface */
379	greg	2.6	puts("void trans tgreen\n0\n0\n7 .7 1 .7 .04 .04 .9 1\n");
380			fflush(stdout);
381	greg	2.28	sprintf(buf, "gensurf tgreen bsdf - - - %d %d", grid_res-1, grid_res-1);
382	greg	2.6	pfp = popen(buf, "w");
383			if (pfp == NULL) {
384	greg	2.21	fprintf(stderr, "%s: cannot open '\| %s'\n", progname, buf);
385	greg	2.6	return(1);
386			}
387	greg	2.28	for (i = 0; i < grid_res; i++)
388			for (j = 0; j < grid_res; j++) {
389	greg	2.6	ovec_from_pos(dir, i, j);
390	greg	2.26	bsdf = eval_rbfrep(dsf_list, dir);
391	greg	2.14	bsdf = log(bsdf + 1e-5) - min_log;
392	greg	2.6	fprintf(pfp, "%.8e %.8e %.8e\n",
393			dir[0]bsdf, dir[1]bsdf, dir[2]*bsdf);
394			}
395	greg	2.11	if (pclose(pfp) != 0)
396			return(1);
397			#endif
398			return(0);
399	greg	2.6	}
400	greg	2.35
401			#endif /* TEST_MAIN */