src/cv/ies2rad.c

#ifndef lint
static const char       RCSid[] = "$Id: ies2rad.c,v 2.31 2018/06/05 16:04:00 greg Exp $";
#endif
/*
 * ies2rad -- Convert IES luminaire data to Radiance description
 *
 * ies2rad converts an IES LM-63 luminare description to a Radiance
 * luminaire description.  In addition, ies2rad manages a local
 * database of Radiance luminaire files.
 *
 * Ies2rad generates two or three files for each luminaire. For a
 * luminaire named LUM, ies2rad will generate LUM.rad, a Radiance
 * scene description file which describes the light source, LUM.dat,
 * which contains the photometric data from the IES LM-63 file, and
 * (if tilt data is provided) LUM%.dat, which contains the tilt data
 * from the IES file.
 *
 * Ies2rad is supported by the Radiance function files source.cal and
 * tilt.cal, which transform the coordinates in the IES data into
 * Radiance (θ,φ) luminaire coordinates and then apply photometric and
 * tilt data to generate Radiance light. θ is altitude from the
 * negative z-axis and φ is azimuth from the positive x-axis,
 * increasing towards the positive y-axis. This system matches none of
 * the usual goniophotometric conventions, but it is closest to IES
 * type C; V in type C photometry is θ in Radiance and L is -φ.
 *
 * The ies2rad scene description for a luminaire LUM, with tilt data,
 * uses the following Radiance scene description primitives:
 *
 *     void brightdata LUM_tilt
 *     …
 *     LUM_tilt brightdata LUM_dist
 *     …
 *     LUM_dist light LUM_light
 *     …
 *     LUM_light surface1 name1
 *     …
 *     LUM_light surface2 name2
 *     …
 *     LUM_light surface_n name_n
 *
 * Without tilt data, the primitives are:
 *
 *     void brightdata LUM_dist
 *     …
 *     LUM_dist light LUM_light
 *     …
 *     LUM_light surface1 name1
 *     …
 *     LUM_light surface2 name2
 *     …
 *     LUM_light surface_n name_n
 *
 * As many surfaces are given as required to describe the light
 * source. Illum may be used rather than light so that a visible form
 * (impostor) may be given to the luminaire, rather than a simple
 * glowing shape. If an impostor is provided, it must be wholly
 * contained within the illum and if it provides impostor light
 * sources, those must be given with glow, so that they do not
 * themselves illuminate the scene, providing incorrect results.
 *
 * The ies2rad code uses the "bsd" style. For emacs, this is set up
 * automatically in the "Local Variables" section at the end of the
 * file. For vim, use ":set tabstop=8 shiftwidth=8".
 *
 *      07Apr90         Greg Ward
 *
 *  Fixed correction factor for flat sources 29Oct2001 GW
 *  Extensive comments added by Randolph Fritz May2018
 */

#include <math.h>
#include <ctype.h>

#include "rtio.h"
#include "color.h"
#include "paths.h"

#define PI              3.14159265358979323846

/* floating comparisons -- floating point numbers within FTINY of each
 * other are considered equal */
#define FTINY           1e-6
#define FEQ(a,b)        ((a)<=(b)+FTINY&&(a)>=(b)-FTINY)


/* IESNA LM-63 keywords and constants */
/* Since 1991, LM-63 files have begun with the magic keyword IESNA */
#define MAGICID         "IESNA"
#define LMAGICID        5
/* But newer files start with IESNA:LM-63- */
#define MAGICID2        "IESNA:LM-63-"
#define LMAGICID2       12
/* ies2rad supports the 1986, 1991, and 1995 versions of
 * LM-63. FIRSTREV describes the first version; LASTREV describes the
 * 1995 version. */
#define FIRSTREV        86
#define LASTREV         95

/* The following definitions support LM-63 file keyword reading and
 * analysis.
 *
 * This section defines two function-like macros: keymatch(i,s), which
 * checks to see if keyword i matches string s, and checklamp(s),
 * which checks to see if a string matches the keywords "LAMP" or
 * "LAMPCAT".
 *
 * LM-63-1986 files begin with a list of free-form label lines.
 * LM-63-1991 files begin with the identifying line "IESNA91" followed
 * by a list of formatted keywords.  LM-63-1995 files begin with the
 * identifying line "IESNA:LM-63-1995" followed by a list of formatted
 * keywords.
 *
 * The K_* #defines enumerate the keywords used in the different
 * versions of the file and give them symbolic names.
 *
 * The D86, D91, and D95 #defines validate the keywords in the 1986,
 * 1991, and 1995 versions of the standard, one bit per keyword.
 * Since the 1986 standard does not use keywords, D86 is zero.  The
 * 1991 standard has 13 keywords, and D91 has the lower 13 bits set.
 * The 1995 standard has 14 keywords, and D95 has the lower 14 bits
 * set.
 *
 */
#define D86             0

#define K_TST           0
#define K_MAN           1
#define K_LMC           2
#define K_LMN           3
#define K_LPC           4
#define K_LMP           5
#define K_BAL           6
#define K_MTC           7
#define K_OTH           8
#define K_SCH           9
#define K_MOR           10
#define K_BLK           11
#define K_EBK           12

/* keywords defined in LM-63-1991 */
#define D91             ((1L<<13)-1)

#define K_LMG           13

/* keywords defined in LM-63-1995 */
#define D95             ((1L<<14)-1)

char    k_kwd[][20] = {"TEST", "MANUFAC", "LUMCAT", "LUMINAIRE", "LAMPCAT",
                        "LAMP", "BALLAST", "MAINTCAT", "OTHER", "SEARCH",
                        "MORE", "BLOCK", "ENDBLOCK", "LUMINOUSGEOMETRY"};

long k_defined[] = {D86, D86, D86, D86, D86, D91, D91, D91, D91, D95};

int     filerev = FIRSTREV;

#define keymatch(i,s)   (k_defined[filerev-FIRSTREV]&1L<<(i) &&\
                                k_match(k_kwd[i],s))

#define checklamp(s)    (!(k_defined[filerev-FIRSTREV]&(1<<K_LMP|1<<K_LPC)) ||\
                                keymatch(K_LMP,s) || keymatch(K_LPC,s))

/* tilt specs
 *
 * This next series of definitions address metal-halide lamps, which
 * change their brightness depending on the angle at which they are
 * mounted. The section begins with "TILT=".  The constants in this
 * section are all defined in LM-63.
 *
 */

#define TLTSTR          "TILT="
#define TLTSTRLEN       5
#define TLTNONE         "NONE"
#define TLTINCL         "INCLUDE"
#define TLT_VERT        1
#define TLT_H0          2
#define TLT_H90         3

/* Constants from LM-63 files */

/* photometric types
 *
 * This enumeration reflects three different methods of measuring the
 * distribution of light from a luminaire -- "goniophotometry" -- and
 * the different coordinate systems related to these
 * goniophotometers.  All are described in IES standard LM-75-01.
 * Earlier and shorter descriptions may be found the LM-63 standards
 * from 1986, 1991, and 1995.
 *
 * ies2rad does not support type A photometry.
 *
 * In the 1986 file format, LM-63-86, 1 is used for type C and type A
 * photometric data.
 *
 */
#define PM_C            1
#define PM_B            2
#define PM_A            3

/* unit types */
#define U_FEET          1
#define U_METERS        2

/* string lengths */
/* Maximum input line is 256 characters including CR LF at end. */
#define MAXLINE         257
#define RMAXWORD        76

/* End of LM-63-related #defines */

/* file extensions */
#define T_RAD           ".rad"
#define T_DST           ".dat"
#define T_TLT           "%.dat"
#define T_OCT           ".oct"

/* shape types
 * These #defines enumerate the shapes of the Radiance objects which
 * emit the light.
 */
#define RECT            1
#define DISK            2
#define SPHERE          3

/* The diameter of a point source luminaire model. Also the minimum
 * size (in meters) that the luminous opening of a luminaire must have
 * to be treated as other than a point source. */
#define MINDIM          .001

/* feet to meters */
/* length_in_meters = length_in_feet * F_M */
#define F_M             .3048

/* abspath - return true if a path begins with a directory separator
 * or a '.' (current directory) */
#define abspath(p)      (ISDIRSEP((p)[0]) || (p)[0] == '.')

/* Global variables.
 *
 * Mostly, these are a way of communicating command line parameters to
 * the rest of the program.
 */
static char     default_name[] = "default";

char    *libdir = NULL;                 /* library directory location */
char    *prefdir = NULL;                /* subdirectory */
char    *lampdat = "lamp.tab";          /* lamp data file */

double  meters2out = 1.0;               /* conversion from meters to output */
char    *lamptype = NULL;               /* selected lamp type */
char    *deflamp = NULL;                /* default lamp type */
float   defcolor[3] = {1.,1.,1.};       /* default lamp color */
float   *lampcolor = defcolor;          /* pointer to current lamp color */
double  multiplier = 1.0;               /* multiplier for all light sources */
char    units[64] = "meters";           /* output units */
int     out2stdout = 0;                 /* put out to stdout r.t. file */
int     instantiate = 0;                /* instantiate geometry */
double  illumrad = 0.0;                 /* radius for illum sphere */

/* This struct describes the Radiance source object */
typedef struct {
        int     isillum;                        /* do as illum */
        int     type;                           /* RECT, DISK, SPHERE */
        double  mult;                           /* candela multiplier */
        double  w, l, h;                        /* width, length, height */
        double  area;                           /* max. projected area */
} SRCINFO;                              /* a source shape (units=meters) */

/* A count and pointer to the list of input file names */
int     gargc;                          /* global argc */
char    **gargv;                        /* global argv */

/* macros to scan numbers out of IES files
 *
 * fp is a file pointer.  scnint() places the number in the integer
 * indicated by ip; scnflt() places the number in the double indicated
 * by rp. The macros return 1 if successful, 0 if not.
 *
 */
#define scnint(fp,ip)   cvtint(ip,getword(fp))
#define scnflt(fp,rp)   cvtflt(rp,getword(fp))

/* The original (1986) version of LM-63 allows decimals points in
 * integers, so that, for instance, the number of lamps may be written
 * 3.0 (the number, obviously, must still be an integer.) This
 * confusing define accommodates that.  */
#define isint           isflt

/* Function declarations */
static int ies2rad(char *inpname, char *outname);
static void initlamps(void);
static int dosource(SRCINFO *sinf, FILE *in, FILE *out, char *mod, char *name);
static int dotilt(FILE *in, FILE *out, char *dir, char *tltspec,
                char *dfltname, char *tltid);
static int cvgeometry(char *inpname, SRCINFO *sinf, char *outname, FILE *outfp);
static int cvtint(int *ip, char *wrd);
static int cvdata(FILE *in, FILE *out, int ndim, int npts[], double mult,
                double lim[][2]);
static int cvtflt(double *rp, char *wrd);
static int makeshape(SRCINFO *shp, double width, double length, double height);
static int putsource(SRCINFO *shp, FILE *fp, char *mod, char *name,
                int dolower, int doupper, int dosides);
static void putrectsrc(SRCINFO *shp, FILE *fp, char *mod, char *name, int up);
static void putsides(SRCINFO *shp, FILE *fp, char *mod, char *name);
static void putdisksrc(SRCINFO *shp, FILE *fp, char *mod, char *name, int up);
static void putspheresrc(SRCINFO *shp, FILE *fp, char *mod, char *name);
static void putrect(SRCINFO *shp, FILE *fp, char *mod, char *name, char *suffix,
                int a, int b, int c, int d);
static void putpoint(SRCINFO *shp, FILE *fp, int p);
static void putcyl(SRCINFO *shp, FILE *fp, char *mod, char *name);
static char * tailtrunc(char *name);
static char * filename(char *path);
static char * libname(char *path, char *fname, char *suffix);
static char * getword(FILE *fp);
static char * fullnam(char *path, char *fname, char *suffix);

/* main - process arguments and run the conversion
 *
 * Refer to the man page for details of the arguments.
 *
 * Following Unix environment conventions, main() exits with 0 on
 * success and 1 on failure.
 *
 * ies2rad outputs either two or three files for a given IES
 * file. There is always a .rad file containing Radiance scene
 * description primitives and a .dat file for the photometric data. If
 * tilt data is given, that is placed in a separate .dat file.  So
 * ies2rad must have a filename to operate. Sometimes this name is the
 * input file name, shorn of its extension; sometimes it is given in
 * the -o option. But an output file name is required for ies2rad to
 * do its work.
 *
 * Older versions of the LM-63 standard allowed inclusion of multiple
 * luminaires in one IES file; this is not supported by ies2rad.
 *
 * This code sometimes does not check to make sure it has not run out
 * of arguments; this can lead to segmentation faults and perhaps
 * other errors.
 *
 */
int
main(
        int     argc,
        char    *argv[]
)
{
        char    *outfile = NULL;
        int     status;
        char    outname[RMAXWORD];
        double  d1;
        int     i;

        /* Scan the options */
        for (i = 1; i < argc && argv[i][0] == '-'; i++)
                switch (argv[i][1]) {
                case 'd':               /* dimensions */
                        if (argv[i][2] == '\0')
                                goto badopt;
                        if (argv[i][3] == '\0')
                                d1 = 1.0;
                        else if (argv[i][3] == '/') {
                                d1 = atof(argv[i]+4);
                                if (d1 <= FTINY)
                                        goto badopt;
                        } else
                                goto badopt;
                        switch (argv[i][2]) {
                        case 'c':               /* centimeters */
                                if (FEQ(d1,10.))
                                        strcpy(units,"millimeters");
                                else {
                                        strcpy(units,"centimeters");
                                        strcat(units,argv[i]+3);
                                }
                                meters2out = 100.*d1;
                                break;
                        case 'm':               /* meters */
                                if (FEQ(d1,1000.))
                                        strcpy(units,"millimeters");
                                else if (FEQ(d1,100.))
                                        strcpy(units,"centimeters");
                                else {
                                        strcpy(units,"meters");
                                        strcat(units,argv[i]+3);
                                }
                                meters2out = d1;
                                break;
                        case 'i':               /* inches */
                                strcpy(units,"inches");
                                strcat(units,argv[i]+3);
                                meters2out = d1*(12./F_M);
                                break;
                        case 'f':               /* feet */
                                if (FEQ(d1,12.))
                                        strcpy(units,"inches");
                                else {
                                        strcpy(units,"feet");
                                        strcat(units,argv[i]+3);
                                }
                                meters2out = d1/F_M;
                                break;
                        default:
                                goto badopt;
                        }
                        break;
                case 'l':               /* library directory */
                        libdir = argv[++i];
                        break;
                case 'p':               /* prefix subdirectory */
                        prefdir = argv[++i];
                        break;
                case 'f':               /* lamp data file */
                        lampdat = argv[++i];
                        break;
                case 'o':               /* output file root name */
                        outfile = argv[++i];
                        break;
                case 's':               /* output to stdout */
                        out2stdout = !out2stdout;
                        break;
                case 'i':               /* illum */
                        illumrad = atof(argv[++i]);
                        break;
                case 'g':               /* instantiate geometry? */
                        instantiate = !instantiate;
                        break;
                case 't':               /* override lamp type */
                        lamptype = argv[++i];
                        break;
                case 'u':               /* default lamp type */
                        deflamp = argv[++i];
                        break;
                case 'c':               /* default lamp color */
                        defcolor[0] = atof(argv[++i]);
                        defcolor[1] = atof(argv[++i]);
                        defcolor[2] = atof(argv[++i]);
                        break;
                case 'm':               /* multiplier */
                        multiplier = atof(argv[++i]);
                        break;
                default:
                badopt:
                        fprintf(stderr, "%s: bad option: %s\n",
                                        argv[0], argv[i]);
                        exit(1);
                }
        /* Save pointers to the list of input file names */
        gargc = i;
        gargv = argv;

        /* get lamp data (if needed) */
        initlamps();

        /* convert ies file(s) */
        /* If an output file name is specified */
        if (outfile != NULL) {
                if (i == argc)
                        /* If no input filename is given, use stdin as
                         * the source for the IES file */
                        exit(ies2rad(NULL, outfile) == 0 ? 0 : 1);
                else if (i == argc-1)
                        /* If exactly one input file name is given, use it. */
                        exit(ies2rad(argv[i], outfile) == 0 ? 0 : 1);
                else
                        goto needsingle; /* Otherwise, error. */
        } else if (i >= argc) {
                /* If an output file and an input file are not give, error. */
                fprintf(stderr, "%s: missing output file specification\n",
                                argv[0]);
                exit(1);
        }
        /* If no input or output file is given, error. */
        if (out2stdout && i != argc-1)
                goto needsingle;
        /* Otherwise, process each input file in turn. */
        status = 0;
        for ( ; i < argc; i++) {
                tailtrunc(strcpy(outname,filename(argv[i])));
                if (ies2rad(argv[i], outname) != 0)
                        status = 1;
        }
        exit(status);
needsingle:
        fprintf(stderr, "%s: single input file required\n", argv[0]);
        exit(1);
}

/* Initlamps -- If necessary, read lamp data table */
void
initlamps(void)                         /* set up lamps */
{
        float   *lcol;
        int     status;

        /* If the lamp name is set to default, don't bother to read
         * the lamp data table. */
        if (lamptype != NULL && !strcmp(lamptype, default_name) &&
                        deflamp == NULL)
                return;

        if ((status = loadlamps(lampdat)) < 0) /* Load the lamp data table */
                exit(1);                       /* Exit if problems
                                                * with the file. */
        if (status == 0) {
                /* If can't open the file, just use the standard default lamp */
                fprintf(stderr, "%s: warning - no lamp data\n", lampdat);
                lamptype = default_name;
                return;
        }
        if (deflamp != NULL) {
                /* Look up the specified default lamp type */
                if ((lcol = matchlamp(deflamp)) == NULL)
                        /* If it can't be found, use the default */
                        fprintf(stderr,
                                "%s: warning - unknown default lamp type\n",
                                        deflamp);
                else
                        /* Use the selected default lamp color */
                        copycolor(defcolor, lcol);
        }
        /* If a lamp type is specified and can be found, use it, and
         * release the lamp data table memory; it won't be needed any more. */
        if (lamptype != NULL) {
                if (strcmp(lamptype, default_name)) {
                        if ((lcol = matchlamp(lamptype)) == NULL) {
                                fprintf(stderr,
                                        "%s: warning - unknown lamp type\n",
                                                lamptype);
                                lamptype = default_name;
                        } else
                                copycolor(defcolor, lcol);
                }
                freelamps();                    /* all done with data */
        }
        /* else keep lamp data */
}

/*
 * File path operations
 *
 * These provide file path operations that operate on both MS-Windows
 * and *nix. They will ignore and pass, but will not necessarily
 * process correctly, Windows drive letters. Paths including Windows
 * UNC network names (\\server\folder\file) may also cause problems.
 *
 */

/*
 * stradd()
 *
 * Add a string to the end of a string, optionally concatenating a
 * file path separator character.  If the path already ends with a
 * path separator, no additional separator is appended.
 *
 */
char *
stradd(                 /* add a string at dst */
        char    *dst,
        char    *src,
        int     sep
)
{
        if (src && *src) {
                do
                        *dst++ = *src++;
                while (*src);
                if (sep && dst[-1] != sep)
                        *dst++ = sep;
        }
        *dst = '\0';
        return(dst);
}

/*
 * fullnam () - return a usable path name for an output file
 */
char *
fullnam(
        char    *path,          /* The base directory path */
        char    *fname,         /* The file name */
        char    *suffix         /* A suffix, which usually contains
                                 * a file name extension. */
)
{
        extern char *prefdir;
        extern char *libdir;

        if (prefdir != NULL && abspath(prefdir))
                /* If the subdirectory path is absolute or '.', just
                 * concatenate the names together */
                libname(path, fname, suffix);
        else if (abspath(fname))
                /* If there is no subdirectory, and the file name is
                 * an absolute path or '.', concatenate the path,
                 * filename, and suffix. */
                strcpy(stradd(path, fname, 0), suffix);
        else
                /* If the file name is relative, concatenate path,
                 * library directory, directory separator, file name,
                 * and suffix.  */
                libname(stradd(path, libdir, DIRSEP), fname, suffix);

        return(path);
}


/*
 * libname - convert a file name to a path
 */
char *
libname(
        char    *path,          /* The base directory path */
        char    *fname,         /* The file name */
        char    *suffix         /* A suffix, which usually contains
                                 * a file name extension. */
)
{
        extern char *prefdir;   /* The subdirectory where the file
                                 * name is stored. */

        if (abspath(fname))
                /* If the file name begins with '/' or '.', combine
                 * it with the path and attach the suffix */
                strcpy(stradd(path, fname, 0), suffix);
        else
                /* If the file name is relative, attach it to the
                 * path, include the subdirectory, and append the suffix. */
                strcpy(stradd(stradd(path, prefdir, DIRSEP), fname, 0), suffix);

        return(path);
}

/* filename - find the base file name in a buffer containing a path
 *
 * The pointer is to a character within the buffer, not a string in itself;
 * it will become invalid when the buffer is freed.
 *
 */
char *
filename(
        char    *path
)
{
        char    *cp;

        for (cp = path; *path; path++)
                if (ISDIRSEP(*path))
                        cp = path+1;
        return(cp);
}


/* filetrunc() - return the directory portion of a path
 *
 * The path is passed in in a pointer to a buffer; a null character is
 * inserted in the buffer after the last directory separator
 *
 */
char *
filetrunc(
        char    *path
)
{
        char    *p1, *p2;

        for (p1 = p2 = path; *p2; p2++)
                if (ISDIRSEP(*p2))
                        p1 = p2;
        if (p1 == path && ISDIRSEP(*p1))
                p1++;
        *p1 = '\0';
        return(path);
}

/* tailtrunc() - trim a file name extension, if any.
 *
 * The file name is passed in in a buffer indicated by *name; the
 * period which begins the extension is replaced with a 0 byte.
 */
char *
tailtrunc(
        char    *name
)
{
        char    *p1, *p2;

        /* Skip leading periods */
        for (p1 = filename(name); *p1 == '.'; p1++)
                ;
        /* Find the last period in a file name */
        p2 = NULL;
        for ( ; *p1; p1++)
                if (*p1 == '.')
                        p2 = p1;
        /* If present, trim the filename at that period */
        if (p2 != NULL)
                *p2 = '\0';
        return(name);
}

/* blanktrunc() - trim spaces at the end of a string
 *
 * the string is passed in a character array, which is modified
 */
void
blanktrunc(
        char    *s
)
{
        char    *cp;

        for (cp = s; *cp; cp++)
                ;
        while (cp-- > s && isspace(*cp))
                ;
        *++cp = '\0';
}

/* k_match - return true if keyword matches header line */
int
k_match(
        char    *kwd,           /* keyword */
        char    *hdl            /* header line */
)
{
        /* Skip leading spaces */
        while (isspace(*hdl))
                hdl++;
        /* The line has to begin with '[' */
        if (*hdl++ != '[')
                return(0);
        /* case-independent keyword match */
        while (toupper(*hdl) == *kwd++)
                if (!*hdl++)
                        return(0);
        /* If we have come to the end of the keyword, and the keyword
         * at the beginning of the matched line is terminated with
         * ']', return 1 */
        return(!kwd[-1] & (*hdl == ']'));
}

/* keyargs - return the argument of a keyword, without leading spaces
 *
 * keyargs is passed a pointer to a buffer; it returns a pointer to
 * where the argument starts in the buffer
 *
 */
char *
keyargs(
        char    *hdl /* header line */
)
{
        while (*hdl && *hdl++ != ']')
                ;
        while (isspace(*hdl))
                hdl++;
        return(hdl);
}


/* putheader - output the header of the .rad file
 *
 * Header is:
 *   # <file> <file> <file> (all files from input line)
 *   # Dimensions in [feet,meters,etc.]
 *
 * ??? Is listing all the input file names correct behavior?
 *
 */
void

putheader(
        FILE    *out
)
{
        int     i;

        putc('#', out);
        for (i = 0; i < gargc; i++) {
                putc(' ', out);
                fputs(gargv[i], out);
        }
        fputs("\n# Dimensions in ", out);
        fputs(units, out);
        putc('\n', out);
}

/* ies2rad - convert an IES LM-63 file to a Radiance light source desc.
 *
 * Return -1 in case of failure, 0 in case of success.
 *
 * The file version recognition is confused and will treat 1995 and
 * 2002 version files as 1986 version files.
 *
 */
int
ies2rad(                /* convert IES file */
        char    *inpname,
        char    *outname
)
{
        SRCINFO srcinfo;
        char    buf[MAXLINE], tltid[RMAXWORD];
        char    geomfile[128];
        FILE    *inpfp, *outfp;
        int     lineno = 0;

        /* Open input and output files */
        geomfile[0] = '\0';
        srcinfo.isillum = 0;
        if (inpname == NULL) {
                inpname = "<stdin>";
                inpfp = stdin;
        } else if ((inpfp = fopen(inpname, "r")) == NULL) {
                perror(inpname);
                return(-1);
        }
        if (out2stdout)
                outfp = stdout;
        else if ((outfp = fopen(fullnam(buf,outname,T_RAD), "w")) == NULL) {
                perror(buf);
                fclose(inpfp);
                return(-1);
        }

        /* Output the output file header */
        putheader(outfp);

        /* If the lamp type wasn't given on the command line, mark
         * the lamp color as missing */
        if (lamptype == NULL)
                lampcolor = NULL;

        /* Read the input file header, copying lines to the .rad file
         * and looking for a lamp type. Stop at EOF or a line
         * beginning with "TILT=". */
        while (fgets(buf,sizeof(buf),inpfp) != NULL
                        && strncmp(buf,TLTSTR,TLTSTRLEN)) {
                blanktrunc(buf); /* Trim trailing spaces, CR, LF. */
                if (!buf[0])     /* Skip blank lines */
                        continue;
                /* increment the header line count, and check for the
                 * "TILT=" line that terminates the header */
                if (!lineno++) {        /* first line may be magic */
                        if (!strncmp(buf, MAGICID2, LMAGICID2))
                                filerev = atoi(buf+LMAGICID2) - 1900;
                        else if (!strncmp(buf, MAGICID, LMAGICID))
                                filerev = atoi(buf+LMAGICID);
                        if (filerev < FIRSTREV)
                                filerev = FIRSTREV;
                        else if (filerev > LASTREV)
                                filerev = LASTREV;
                }
                /* Output the header line as a comment in the .rad file. */
                fputs("#<", outfp);
                fputs(buf, outfp);
                putc('\n', outfp);

                /* If the header line is a keyword line (file version
                 * later than 1986 and begins with '['), check a lamp
                 * in the "[LAMP]" and "[LAMPCAT]" keyword lines;
                 * otherwise check all lines.  */
                if (lampcolor == NULL && checklamp(buf))
                        lampcolor = matchlamp(*sskip2(buf,0) == '[' ?
                                                keyargs(buf) : buf );
                /* Look for a materials and geometry file in the keywords. */
                if (keymatch(K_LMG, buf)) {
                        strcpy(geomfile, inpname);
                        strcpy(filename(geomfile), keyargs(buf));
                        srcinfo.isillum = 1;
                }
        }

        /* Done reading header information. If a lamp color still
         * hasn't been found, print a warning and use the default
         * color; if a lamp type hasn't been found, but a color has
         * been specified, used the specified color. */
        if (lampcolor == NULL) {
                fprintf(stderr, "%s: warning - no lamp type\n", inpname);
                fputs("# Unknown lamp type (used default)\n", outfp);
                lampcolor = defcolor;
        } else if (lamptype == NULL)
                fprintf(outfp,"# CIE(x,y) = (%f,%f)\n# Depreciation = %.1f%%\n",
                                lampcolor[3], lampcolor[4], 100.*lampcolor[5]);

        /* If the file ended before a "TILT=" line, that's an error. */
        if (feof(inpfp)) {
                fprintf(stderr, "%s: not in IES format\n", inpname);
                goto readerr;
        }

        /* Process the tilt section of the file. */
        /* Get the tilt file name, or the keyword "INCLUDE". */
        atos(tltid, RMAXWORD, buf+TLTSTRLEN);
        if (inpfp == stdin)
                buf[0] = '\0';
        else
                filetrunc(strcpy(buf, inpname));
        /* Process the tilt data. */
        if (dotilt(inpfp, outfp, buf, tltid, outname, tltid) != 0) {
                fprintf(stderr, "%s: bad tilt data\n", inpname);
                goto readerr;
        }

        /* Process the luminaire data. */
        if (dosource(&srcinfo, inpfp, outfp, tltid, outname) != 0) {
                fprintf(stderr, "%s: bad luminaire data\n", inpname);
                goto readerr;
        }

        /* Close the input file */
        fclose(inpfp);

        /* Process an MGF file, if present. cvgeometry() closes outfp. */
        if (cvgeometry(geomfile, &srcinfo, outname, outfp) != 0) {
                fprintf(stderr, "%s: bad geometry file\n", geomfile);
                return(-1);
        }
        return(0);

readerr:
        /* If there is an error reading the file, close the input and
         * .rad output files, and delete the .rad file, returning -1. */
        fclose(inpfp);
        fclose(outfp);
        unlink(fullnam(buf,outname,T_RAD));
        return(-1);
}

/* dotilt -- process tilt data
 *
 * Generate a brightdata primitive which describes the effect of
 * luminaire tilt on luminaire output and return its identifier in tltid.
 *
 * Tilt data (if present) is given as a number 1, 2, or 3, which
 * specifies the orientation of the lamp within the luminaire, a
 * number, n, of (angle, multiplier) pairs, followed by n angles and n
 * multipliers.
 *
 * returns 0 for success, -1 for error
 */
int
dotilt(
        FILE    *in,
        FILE    *out,
        char    *dir,
        char    *tltspec,
        char    *dfltname,
        char    *tltid
)
{
        int     nangles, tlt_type;
        double  minmax[1][2];
        char    buf[PATH_MAX], tltname[RMAXWORD];
        FILE    *datin, *datout;

        /* Decide where the tilt data is; if the luminaire description
         * doesn't have a tilt section, set the identifier to "void". */
        if (!strcmp(tltspec, TLTNONE)) {
                /* If the line is "TILT=NONE", set the input file
                 * pointer to NULL and the identifier to "void". */
                datin = NULL;
                strcpy(tltid, "void");
        } else if (!strcmp(tltspec, TLTINCL)) {
                /* If the line is "TILT=INCLUDE" use the main IES
                 * file as the source of tilt data. */
                datin = in;
                strcpy(tltname, dfltname);
        } else {
                /* If the line is "TILE=<filename>", use that file
                 * name as the source of tilt data. */
                if (ISDIRSEP(tltspec[0]))
                        strcpy(buf, tltspec);
                else
                        strcpy(stradd(buf, dir, DIRSEP), tltspec);
                if ((datin = fopen(buf, "r")) == NULL) {
                        perror(buf);
                        return(-1);
                }
                tailtrunc(strcpy(tltname,filename(tltspec)));
        }
        /* If tilt data is present, read, process, and output it. */
        if (datin != NULL) {
                /* Try to open the output file */
                if ((datout = fopen(fullnam(buf,tltname,T_TLT),"w")) == NULL) {
                        perror(buf);
                        if (datin != in)
                                fclose(datin);
                        return(-1);
                }
                /* Try to copy the tilt data to the tilt data file */
                if (!scnint(datin,&tlt_type) || !scnint(datin,&nangles)
                        || cvdata(datin,datout,1,&nangles,1.,minmax) != 0) {
                        fprintf(stderr, "%s: data format error\n", tltspec);
                        fclose(datout);
                        if (datin != in)
                                fclose(datin);
                        unlink(fullnam(buf,tltname,T_TLT));
                        return(-1);
                }
                fclose(datout);
                if (datin != in)
                        fclose(datin);

                /* Generate the identifier of the brightdata; the filename
                 * with "_tilt" appended. */
                strcat(strcpy(tltid, filename(tltname)), "_tilt");
                /* Write out the brightdata primitive */
                fprintf(out, "\nvoid brightdata %s\n", tltid);
                libname(buf,tltname,T_TLT);
                /* Generate the tilt description */
                switch (tlt_type) {
                case TLT_VERT:
                        /* The lamp is mounted vertically; either
                         * base up or base down. */
                        fprintf(out, "4 noop %s tilt.cal %s\n", buf,
                                minmax[0][1]>90.+FTINY ? "tilt_ang" : "tilt_ang2");
                        break;
                case TLT_H0:
                        /* The lamp is mounted horizontally and
                         * rotates but does not tilt when the
                         * luminaire is tilted. */
                        fprintf(out, "6 noop %s tilt.cal %s -rz 90\n", buf,
                        minmax[0][1]>90.+FTINY ? "tilt_xang" : "tilt_xang2");
                        break;
                case TLT_H90:
                        /* The lamp is mounted horizontally, and
                         * tilts when the luminaire is tilted. */
                        fprintf(out, "4 noop %s tilt.cal %s\n", buf,
                        minmax[0][1]>90.+FTINY ? "tilt_xang" : "tilt_xang2");
                        break;
                default:
                        /* otherwise, this is a bad IES file */
                        fprintf(stderr,
                                "%s: illegal lamp to luminaire geometry (%d)\n",
                                tltspec, tlt_type);
                        return(-1);
                }
                /* And finally output the numbers of integer and real
                 * arguments, of which there are none. */
                fprintf(out, "0\n0\n");
        }
        return(0);
}

/* dosource -- create the source and distribution primitives */
int
dosource(
        SRCINFO *sinf,
        FILE    *in,
        FILE    *out,
        char    *mod,
        char    *name
)
{
        char    buf[PATH_MAX], id[RMAXWORD];
        FILE    *datout;
        double  mult, bfactor, pfactor, width, length, height, wattage;
        double  bounds[2][2];
        int     nangles[2], pmtype, unitype;
        double  d1;
        int     doupper, dolower, dosides;

        /* Read in the luminaire description header */
        if (!isint(getword(in)) || !isflt(getword(in)) || !scnflt(in,&mult)
                        || !scnint(in,&nangles[0]) || !scnint(in,&nangles[1])
                        || !scnint(in,&pmtype) || !scnint(in,&unitype)
                        || !scnflt(in,&width) || !scnflt(in,&length)
                        || !scnflt(in,&height) || !scnflt(in,&bfactor)
                        || !scnflt(in,&pfactor) || !scnflt(in,&wattage)) {
                fprintf(stderr, "dosource: bad lamp specification\n");
                return(-1);
        }
        /* Type A photometry is not supported */
        if (pmtype != PM_C && pmtype != PM_B) {
                fprintf(stderr, "dosource: unsupported photometric type (%d)\n",
                                pmtype);
                return(-1);
        }

        /* Multiplier = the multiplier from the -m option, times the
         * multiplier from the IES file, times the ballast factor,
         * times the "ballast lamp photometric factor," which was part
         * of the 1986 and 1991 standards. In the 1995 standard, it is
         * always supposed to be 1. */
        sinf->mult = multiplier*mult*bfactor*pfactor;

        /* If the count of angles is wrong, raise an error and quit. */
        if (nangles[0] < 2 || nangles[1] < 1) {
                fprintf(stderr, "dosource: too few measured angles\n");
                return(-1);
        }

        /* For internal computation, convert units to meters. */
        if (unitype == U_FEET) {
                width *= F_M;
                length *= F_M;
                height *= F_M;
        }

        /* Make decisions about the shape of the light source
         * geometry, and store them in sinf. */
        if (makeshape(sinf, width, length, height) != 0) {
                fprintf(stderr, "dosource: illegal source dimensions");
                return(-1);
        }

        /* Copy the candela values into a Radiance data file. */
        if ((datout = fopen(fullnam(buf,name,T_DST), "w")) == NULL) {
                perror(buf);
                return(-1);
        }
        if (cvdata(in, datout, 2, nangles, 1./WHTEFFICACY, bounds) != 0) {
                fprintf(stderr, "dosource: bad distribution data\n");
                fclose(datout);
                unlink(fullnam(buf,name,T_DST));
                return(-1);
        }
        fclose(datout);

        /* Output explanatory comment */
        fprintf(out, "# %g watt luminaire, lamp*ballast factor = %g\n",
                        wattage, bfactor*pfactor);
        /* Output distribution "brightdata" primitive. Start handling
           the various cases of symmetry of the distribution. */
        strcat(strcpy(id, filename(name)), "_dist");
        fprintf(out, "\n%s brightdata %s\n", mod, id);
        if (nangles[1] < 2)
                fprintf(out, "4 ");
        else if (pmtype == PM_B)
                fprintf(out, "5 ");
        else if (FEQ(bounds[1][0],90.) && FEQ(bounds[1][1],270.))
                fprintf(out, "7 ");
        else
                fprintf(out, "5 ");

        /* If the generated source geometry will be a box, a flat
         * rectangle, or a disk figure out if it needs a top, a
         * bottom, and/or sides. */
        dolower = (bounds[0][0] < 90.-FTINY); /* Bottom */
        doupper = (bounds[0][1] > 90.+FTINY); /* Top */
        dosides = (doupper & dolower && sinf->h > MINDIM); /* Sides */

        /* Select the appropriate function and parameters from source.cal */
        fprintf(out, "%s %s source.cal ",
                        sinf->type==SPHERE ? "corr" :
                        !dosides ? "flatcorr" :
                        sinf->type==DISK ? "cylcorr" : "boxcorr",
                        libname(buf,name,T_DST));
        if (pmtype == PM_B) {
                if (FEQ(bounds[1][0],0.))
                        fprintf(out, "srcB_horiz2 ");
                else
                        fprintf(out, "srcB_horiz ");
                fprintf(out, "srcB_vert ");
        } else /* pmtype == PM_C */ {
                if (nangles[1] >= 2) {
                        d1 = bounds[1][1] - bounds[1][0];
                        if (d1 <= 90.+FTINY)
                                fprintf(out, "src_phi4 ");
                        else if (d1 <= 180.+FTINY) {
                                if (FEQ(bounds[1][0],90.))
                                        fprintf(out, "src_phi2+90 ");
                                else
                                        fprintf(out, "src_phi2 ");
                        } else
                                fprintf(out, "src_phi ");
                        fprintf(out, "src_theta ");
                        if (FEQ(bounds[1][0],90.) && FEQ(bounds[1][1],270.))
                                fprintf(out, "-rz -90 ");
                } else
                        fprintf(out, "src_theta ");
        }
        /* finish the brightdata primitive with appropriate data */
        if (!dosides || sinf->type == SPHERE)
                fprintf(out, "\n0\n1 %g\n", sinf->mult/sinf->area);
        else if (sinf->type == DISK)
                fprintf(out, "\n0\n3 %g %g %g\n", sinf->mult,
                                sinf->w, sinf->h);
        else
                fprintf(out, "\n0\n4 %g %g %g %g\n", sinf->mult,
                                sinf->l, sinf->w, sinf->h);
        /* Brightdata primitive written out. */

        /* Finally, output the descriptions of the actual radiant
         * surfaces. */
        if (putsource(sinf, out, id, filename(name),
                        dolower, doupper, dosides) != 0)
                return(-1);
        return(0);
}

/* putsource - output the actual light emitting geometry
 *
 * Three kinds of geometry are produced: rectangles and boxes, disks
 * ("ring" primitive, but the radius of the hole is always zero) and
 * cylinders, and spheres.
 */
int
putsource(
        SRCINFO *shp,
        FILE    *fp,
        char    *mod,
        char    *name,
        int     dolower,
        int     doupper,
        int     dosides
)
{
        char    lname[RMAXWORD];

        /* First, describe the light. If a materials and geometry
         * file is given, generate an illum instead. */
        strcat(strcpy(lname, name), "_light");
        fprintf(fp, "\n%s %s %s\n", mod,
                        shp->isillum ? "illum" : "light", lname);
        fprintf(fp, "0\n0\n3 %g %g %g\n",
                        lampcolor[0], lampcolor[1], lampcolor[2]);
        switch (shp->type) {
        case RECT:
                /* Output at least one rectangle. If light is radiated
                 * from the sides of the luminaire, output rectangular
                 * sides as well. */
                if (dolower)
                        putrectsrc(shp, fp, lname, name, 0);
                if (doupper)
                        putrectsrc(shp, fp, lname, name, 1);
                if (dosides)
                        putsides(shp, fp, lname, name);
                break;
        case DISK:
                /* Output at least one disk. If light is radiated from
                 * the sides of luminaire, output a cylinder as well. */
                if (dolower)
                        putdisksrc(shp, fp, lname, name, 0);
                if (doupper)
                        putdisksrc(shp, fp, lname, name, 1);
                if (dosides)
                        putcyl(shp, fp, lname, name);
                break;
        case SPHERE:
                /* Output a sphere. */
                putspheresrc(shp, fp, lname, name);
                break;
        }
        return(0);
}

/* makeshape -- decide what shape will be used
 *
 * makeshape decides what Radiance geometry will be used to represent
 * the light source and stores information about it in shp.
 */
int
makeshape(
        SRCINFO *shp,
        double  width,
        double  length,
        double  height
)
{
        /* Categorize the shape */
        if (illumrad/meters2out >= MINDIM/2.) {
                /* If the -i command line option is used, and the
                 * object is not a point source, output an "illum"
                 * sphere */
                shp->isillum = 1;
                shp->type = SPHERE;
                shp->w = shp->l = shp->h = 2.*illumrad / meters2out;
        } else if (width < MINDIM) {
                /* The width is either zero or negative. */
                width = -width;
                if (width < MINDIM) {
                        /* The width is zero. Use a tiny sphere to
                         * represent a point source. */
                        shp->type = SPHERE;
                        shp->w = shp->l = shp->h = MINDIM;
                } else if (height < .5*width) {
                        /* The width is negative and the height is
                         * modest; output either a disk or a thin
                         * vertical cylinder. */
                        shp->type = DISK;
                        shp->w = shp->l = width;
                        if (height >= MINDIM)
                                shp->h = height;
                        else
                                shp->h = .5*MINDIM;
                } else {
                        /* The width is negative and the object is
                         * tall; output a sphere. */
                        shp->type = SPHERE;
                        shp->w = shp->l = shp->h = width;
                }
        } else {
                /* The width is positive. Output a box, possibly very
                 * thin. */
                shp->type = RECT;
                shp->w = width;
                if (length >= MINDIM)
                        shp->l = length;
                else
                        shp->l = MINDIM;
                if (height >= MINDIM)
                        shp->h = height;
                else
                        shp->h = .5*MINDIM;
        }

        /* Done choosing the shape; calculate its area in the x-y plane. */
        switch (shp->type) {
        case RECT:
                shp->area = shp->w * shp->l;
                break;
        case DISK:
        case SPHERE:
                shp->area = PI/4. * shp->w * shp->w;
                break;
        }
        return(0);
}

/* Rectangular or box-shaped light source.
 *
 * putrectsrc, putsides, putrect, and putpoint are used to output the
 * Radiance description of a box.  The box is centered on the origin
 * and has the dimensions given in the IES file.  The coordinates
 * range from [-1/2*length, -1/2*width, -1/2*height] to [1/2*length,
 * 1/2*width, 1/2*height].
 *
 * The location of the point is encoded in the low-order three bits of
 * an integer. If the integer is p, then: bit 0 is (p & 1),
 * representing length (x), bit 1 is (p & 2) representing width (y),
 * and bit 2 is (p & 4), representing height (z).
 *
 * Looking down from above (towards -z), the vertices of the box or
 * rectangle are numbered so:
 *
 *     2,6                                        3,7
 *        +--------------------------------------+
 *        |                                      |
 *        |                                      |
 *        |                                      |
 *        |                                      |
 *        +--------------------------------------+
 *     0,4                                        1,5
 *
 * The higher number of each pair is above the x-y plane (positive z),
 * the lower number is below the x-y plane (negative z.)
 *
 */

/* putrecsrc - output a rectangle parallel to the x-y plane 
 *
 * Putrecsrc calls out the vertices of a rectangle parallel to the x-y
 * plane.  The order of the vertices is different for the upper and
 * lower rectangles of a box, since a right-hand rule based on the
 * order of the vertices is used to determine the surface normal of
 * the rectangle, and the surface normal determines the direction the
 * light radiated by the rectangle.
 *
 */
void
putrectsrc(
        SRCINFO *shp,
        FILE    *fp,
        char    *mod,
        char    *name,
        int     up
)
{
        if (up)
                putrect(shp, fp, mod, name, ".u", 4, 5, 7, 6);
        else
                putrect(shp, fp, mod, name, ".d", 0, 2, 3, 1);
}

/* putsides - put out sides of box */
void
putsides(
        SRCINFO *shp,
        FILE    *fp,
        char    *mod,
        char    *name
)
{
        putrect(shp, fp, mod, name, ".1", 0, 1, 5, 4);
        putrect(shp, fp, mod, name, ".2", 1, 3, 7, 5);
        putrect(shp, fp, mod, name, ".3", 3, 2, 6, 7);
        putrect(shp, fp, mod, name, ".4", 2, 0, 4, 6);
}

/* putrect - put out a rectangle 
 *
 * putrect generates the "polygon" primitive which describes a
 * rectangle.
 */
void
putrect(
        SRCINFO *shp,
        FILE    *fp,
        char    *mod,
        char    *name,
        char    *suffix,
        int     a,
        int b,
        int c,
        int d
)
{
        fprintf(fp, "\n%s polygon %s%s\n0\n0\n12\n", mod, name, suffix);
        putpoint(shp, fp, a);
        putpoint(shp, fp, b);
        putpoint(shp, fp, c);
        putpoint(shp, fp, d);
}

/* putpoint -- output a the coordinates of a vertex
 *
 * putpoint maps vertex numbers to coordinates and outputs the
 * coordinates.
 */
void
putpoint(
        SRCINFO *shp,
        FILE    *fp,
        int     p
)
{
        static double   mult[2] = {-.5, .5};

        fprintf(fp, "\t%g\t%g\t%g\n",
                        mult[p&1]*shp->l*meters2out,
                        mult[p>>1&1]*shp->w*meters2out,
                        mult[p>>2]*shp->h*meters2out);
}

/* End of routines to output a box-shaped light source */

/* Routines to output a cylindrical or disk shaped light source 
 * 
 * As with other shapes, the light source is centered on the origin.
 * The "ring" and "cylinder" primitives are used.
 *
 */
void
putdisksrc(             /* put out a disk source */
        SRCINFO *shp,
        FILE    *fp,
        char    *mod,
        char    *name,
        int     up
)
{
        if (up) {
                fprintf(fp, "\n%s ring %s.u\n", mod, name);
                fprintf(fp, "0\n0\n8\n");
                fprintf(fp, "\t0 0 %g\n", .5*shp->h*meters2out);
                fprintf(fp, "\t0 0 1\n");
                fprintf(fp, "\t0 %g\n", .5*shp->w*meters2out);
        } else {
                fprintf(fp, "\n%s ring %s.d\n", mod, name);
                fprintf(fp, "0\n0\n8\n");
                fprintf(fp, "\t0 0 %g\n", -.5*shp->h*meters2out);
                fprintf(fp, "\t0 0 -1\n");
                fprintf(fp, "\t0 %g\n", .5*shp->w*meters2out);
        }
}


void
putcyl(                 /* put out a cylinder */
        SRCINFO *shp,
        FILE    *fp,
        char    *mod,
        char    *name
)
{
        fprintf(fp, "\n%s cylinder %s.c\n", mod, name);
        fprintf(fp, "0\n0\n7\n");
        fprintf(fp, "\t0 0 %g\n", .5*shp->h*meters2out);
        fprintf(fp, "\t0 0 %g\n", -.5*shp->h*meters2out);
        fprintf(fp, "\t%g\n", .5*shp->w*meters2out);
}

/* end of of routines to output cylinders and disks */

void
putspheresrc(           /* put out a sphere source */
        SRCINFO *shp,
        FILE    *fp,
        char    *mod,
        char    *name
)
{
        fprintf(fp, "\n%s sphere %s.s\n", mod, name);
        fprintf(fp, "0\n0\n4 0 0 0 %g\n", .5*shp->w*meters2out);
}

/* cvdata - convert LM-63 tilt and candela data to Radiance brightdata format
 *
 * The files created by this routine are intended for use with the Radiance
 * "brightdata" material type.
 *
 * Two types of data are converted; one-dimensional tilt data, which
 * is given in polar coordinates, and two-dimensional candela data,
 * which is given in spherical co-ordinates.
 *
 * Return 0 for success, -1 for failure.
 *
 */
int
cvdata(
        FILE    *in,            /* Input file */
        FILE    *out,           /* Output file */
        int     ndim,           /* Number of dimensions; 1 for
                                 * tilt data, 2 for photometric data. */
        int     npts[],         /* Number of points in each dimension */
        double  mult,           /* Multiple each value by this
                                 * number. For tilt data, always
                                 * 1. For candela values, the
                                 * efficacy of white Radiance light.  */
        double  lim[][2]        /* The range of angles in each dimension. */
)
{
        double  *pt[4];         /* Four is the expected maximum of ndim. */
        int     i, j;
        double  val;
        int     total;

        /* Calculate and output the number of data values */
        total = 1; j = 0;
        for (i = 0; i < ndim; i++)
                if (npts[i] > 1) {
                        total *= npts[i];
                        j++;
                }
        fprintf(out, "%d\n", j);

        /* Read in the angle values, and note the first and last in
         * each dimension, if there is a place to store them. In the
         * case of tilt data, there is only one list of angles. In the
         * case of candela values, vertical angles appear first, and
         * horizontal angles occur second. */
        for (i = 0; i < ndim; i++) {
                /* Allocate space for the angle values. */
                pt[i] = (double *)malloc(npts[i]*sizeof(double));
                for (j = 0; j < npts[i]; j++)
                        if (!scnflt(in, &pt[i][j]))
                                return(-1);
                if (lim != NULL) {
                        lim[i][0] = pt[i][0];
                        lim[i][1] = pt[i][npts[i]-1];
                }
        }

        /* Output the angles. If this is candela data, horizontal
         * angles output first. There are two cases: the first where
         * the angles are evenly spaced, the second where they are
         * not.
         *
         * When the angles are evenly spaced, three numbers are
         * output: the first angle, the last angle, and the number of
         * angles.  When the angles are not evenly spaced, instead
         * zero, zero, and the count of angles is given, followed by a
         * list of angles.  In this case, angles are output four to a line.
         */
        for (i = ndim-1; i >= 0; i--) {
                if (npts[i] > 1) {
                        /* Determine if the angles are evenly spaces */
                        for (j = 1; j < npts[i]-1; j++)
                                if (!FEQ(pt[i][j]-pt[i][j-1],
                                                pt[i][j+1]-pt[i][j]))
                                        break;
                        /* If they are, output the first angle, the
                         * last angle, and a count */
                        if (j == npts[i]-1)
                                fprintf(out, "%g %g %d\n", pt[i][0], pt[i][j],
                                                npts[i]);
                        else {
                                /* otherwise, output 0, 0, and a
                                 * count, followed by the list of
                                 * angles, one to a line. */
                                fprintf(out, "0 0 %d", npts[i]);
                                for (j = 0; j < npts[i]; j++) {
                                        if (j%4 == 0)
                                                putc('\n', out);
                                        fprintf(out, "\t%g", pt[i][j]);
                                }
                                putc('\n', out);
                        }
                }
                /* Free the storage containing the angle values. */
                free((void *)pt[i]);
        }

        /* Finally, read in the data values (candela or multiplier values,
         * depending on the part of the file) and output them four to
         * a line. */
        for (i = 0; i < total; i++) {
                if (i%4 == 0)
                        putc('\n', out);
                if (!scnflt(in, &val))
                        return(-1);
                fprintf(out, "\t%g", val*mult);
        }
        putc('\n', out);
        return(0);
}

/* getword - get an LM-63 delimited word from fp
 *
 * Getword gets a word from an IES file delimited by either white
 * space or a comma surrounded by white space. A pointer to the word
 * is returned, which will persist only until getword is called again.
 * At EOF, return NULL instead.
 *
 */
char *
getword(                        /* scan a word from fp */
        FILE    *fp
)
{
        static char     wrd[RMAXWORD];
        char    *cp;
        int     c;

        /* Skip initial spaces */
        while (isspace(c=getc(fp)))
                ;
        /* Get characters to a delimiter or until wrd is full */
        for (cp = wrd; c != EOF && cp < wrd+RMAXWORD-1;
                        *cp++ = c, c = getc(fp))
                if (isspace(c) || c == ',') {
                        /* If we find a delimiter */
                        /* Gobble up whitespace */
                        while (isspace(c))
                                c = getc(fp);
                        /* If it's not a comma, put the first
                         * character of the next data item back */
                        if ((c != EOF) & (c != ','))
                                ungetc(c, fp);
                        /* Close out the strimg */
                        *cp = '\0';
                        /* return it */
                        return(wrd);
                }
        /* If we ran out of space or are at the end of the file,
         * return either the word or NULL, as appropriate. */
        *cp = '\0';
        return(cp > wrd ? wrd : NULL);
}

/* cvtint - convert an IES word to an integer
 *
 * A pointer to the word is passed in wrd; ip is expected to point to
 * an integer.  cvtint() will silently truncate a floating point value
 * to an integer; "1", "1.0", and "1.5" will all return 1.
 *
 * cvtint() returns 0 if it fails, 1 if it succeeds.
 */
int
cvtint(
        int     *ip,
        char    *wrd
)
{
        if (wrd == NULL || !isint(wrd))
                return(0);
        *ip = atoi(wrd);
        return(1);
}


/* cvtflt - convert an IES word to a double precision floating-point number
 *
 * A pointer to the word is passed in wrd; rp is expected to point to
 * a double.
 *
 * cvtflt returns 0 if it fails, 1 if it succeeds.
 */
int
cvtflt(
        double  *rp,
        char    *wrd
)
{
        if (wrd == NULL || !isflt(wrd))
                return(0);
        *rp = atof(wrd);
        return(1);
}

/* cvgeometry - process materials and geometry format luminaire data
 *
 * The materials and geometry format (MGF) for describing luminaires
 * was a part of Radiance that was first adopted and then retracted by
 * the IES as part of LM-63.  It provides a way of describing
 * luminaire geometry similar to the Radiance scene description
 * format.
 *
 * cvgeometry() generates an mgf2rad command and then, if "-g" is given
 * on the command line, an oconv command, both of which are then
 * executed with the system() function.
 *
 * The generated commands are:
 *   mgf2rad -e <multiplier> -g <size> <mgf_filename> \
 *     | xform -s <scale_factor> \
 *     >> <luminare_scene_description_file
 * or:
 *   mgf2rad -e <multiplier> -g <size> <mgf_filename> \
 *     oconv - > <instance_filename>
 */
int
cvgeometry(
        char    *inpname,
        SRCINFO *sinf,
        char    *outname,
        FILE    *outfp                  /* close output file upon return */
)
{
        char    buf[256];
        char    *cp;

        if (inpname == NULL || !inpname[0]) {   /* no geometry file */
                fclose(outfp);
                return(0);
        }
        putc('\n', outfp);
        strcpy(buf, "mgf2rad ");                /* build mgf2rad command */
        cp = buf+8;
        if (!FEQ(sinf->mult, 1.0)) {
                /* if there's an output multiplier, include in the
                 * mgf2rad command */
                sprintf(cp, "-e %f ", sinf->mult);
                cp += strlen(cp);
        }
        /* Include the glow distance for the geometry */
        sprintf(cp, "-g %f %s ",
                sqrt(sinf->w*sinf->w + sinf->h*sinf->h + sinf->l*sinf->l),
                        inpname);
        cp += strlen(cp);
        if (instantiate) {              /* instantiate octree */
                /* If "-g" is given on the command line, include an
                 * "oconv" command in the pipe. */
                strcpy(cp, "| oconv - > ");
                cp += 12;
                fullnam(cp,outname,T_OCT);
                /* Only update if the input file is newer than the
                 * output file */
                if (fdate(inpname) > fdate(outname) &&
                                system(buf)) {          /* create octree */
                        fclose(outfp);
                        return(-1);
                }
                /* Reference the instance file in the scene description */
                fprintf(outfp, "void instance %s_inst\n", outname);
                /* If the geometry isn't in meters, scale it appropriately. */
                if (!FEQ(meters2out, 1.0))
                        fprintf(outfp, "3 %s -s %f\n",
                                        libname(buf,outname,T_OCT),
                                        meters2out);
                else
                        fprintf(outfp, "1 %s\n", libname(buf,outname,T_OCT));
                /* Close off the "instance" primitive. */
                fprintf(outfp, "0\n0\n");
                /* And the Radiance scene description. */
                fclose(outfp);
        } else {                        /* else append to luminaire file */
                if (!FEQ(meters2out, 1.0)) {    /* apply scalefactor */
                        sprintf(cp, "| xform -s %f ", meters2out);
                        cp += strlen(cp);
                }
                if (!out2stdout) {
                        fclose(outfp);
                        strcpy(cp, ">> ");      /* append works for DOS? */
                        cp += 3;
                        fullnam(cp,outname,T_RAD);
                }
                if (system(buf))
                        return(-1);
        }
        return(0);
}

/* Set up emacs indentation */
/* Local Variables: */
/*   c-file-style: "bsd" */
/* End: */

/* For vim, use ":set tabstop=8 shiftwidth=8" */
Revision:	2.32
Committed:	Sat Dec 28 18:05:14 2019 UTC (5 years, 10 months ago) by greg
Content type:	text/plain
Branch:	MAIN
CVS Tags:	rad5R3
Changes since 2.31:	+1 -4 lines
Log Message:	Removed redundant include files