--- ray/doc/notes/ReleaseNotes	2022/04/11 18:08:19	1.414
+++ ray/doc/notes/ReleaseNotes	2023/09/12 17:08:38	1.427
@@ -2544,3 +2544,62 @@ ambient cache is on and file is named.  If straight im
 is requested, we randomize all samples and avoid cache collisions.
 
 Added cnt -s option to shuffle output.
+
+Fixed issue with divide-by-zero errors in the ambient super-sampling
+routine discovered by Jon Sargent of Solemma.  This affected regions
+that had zero radiance, such as black backgrounds or unlit areas
+with -av 0 0 0, when super-sampling was effectively disabled, causing
+some loss in accuracy of the results.
+
+Updated Klems Half- and Quarter-bases to match angles currently used
+in WINDOW.
+
+Eliminated most aiming failures for triangular light sources, at the
+expense of conservative sampling near the centroid.  Thanks to
+David Geisler-Moroder for his help on this.
+
+Increased maximum set size to 8191 to avoid set overflow errors.
+
+Added source obstruction test to statistics being kept on which
+sources were visible in adaptive shadow testing code.  Previous
+behavior was likely over-estimating source contributions.
+
+Added diffuse components into maximum directional hemispherical
+reported by checkBSDF, so comparing to 100% is easier for each
+component.
+
+Fixed incorrect calculations in iso2klems script, thanks to
+help from Jacob Jonnson.
+
+Updated official copyright and license according to new wording
+provided by Jean Haemmerle at the LBNL Intellectual Property Office.
+Both were copied verbatim from e-mail I received from Taoning Wang
+on 8/20/2022.
+
+Added -features option to rpict, rtrace, and rcontrib to check
+which features are present or look for specific feature support.
+This addition was suggested by Peter Apian-Bennewitz as an easier
+way to determine which version of Radiance is installed and what
+it supports, and is timely as we begin our refactoring of the
+rendering code.  There are no current plans to add this to rvu.
+
+Added falsecolor -odim, -orct, and -c0 options to overlay grid of
+values on image.  This was requested by Rob Shakespeare.
+
+Added -i* and -o* options in rhcopy for reading rays from the
+standard input and writing rays from holodeck to standard output.
+This will hopefully be useful in combining rholo with rcontrib.
+
+Added further checking for coincident (overlapping) flat surfaces,
+preferring front sides to back sides in the ray intersection
+calculation.  This only applies to rings and faces, as the other
+surface types would have required additional calculations to
+make them work.  Material transparency is still the primary
+consideration, now followed by ray hit side, followed by
+modifier definition order in the input.
+
+Increased octree and object limits to allow scenes with billions
+of primitives.
+
+Made reciprocity averaging default to "off" in bsdf2ttree, as it seems
+to create more problems than it solves.