--- ray/doc/notes/ReleaseNotes	2014/06/19 16:26:55	1.237
+++ ray/doc/notes/ReleaseNotes	2016/01/29 16:21:55	1.273
@@ -1807,7 +1807,7 @@ of KitWare and sponsored by NREL.  This includes a qt-
 driver for rvu, which is built in the new subdirectory src/qtrvu.
 
 =====================
-Version 4.2
+Version 4.2 (Release date 7/31/2014)
 
 Axel Jacobs added -cp and -palettes options to falsecolor.
 
@@ -1946,3 +1946,127 @@ Introduced new Hessian-based error control in irradian
 calculation.  Since the format of the stored ambient values is different,
 the old files will be rejected with an error message and must be removed.
 The programs may be compiled with the -DOLDAMB option if this is a problem.
+
+Added -p option to rcontrib to set function file parameters on a per-modifier
+basis to simplify bin evaluation.
+
+Created rfluxmtx program to compute flux transfer matrices from a sender
+surface to one or more receiver surfaces.  (Renamed the file klems_int.cal
+to klems_full.cal in the process.)
+
+Added "-c" option to getinfo to execute command on data segment.
+
+================================
+Version 5.0 (Released 9/18/2015)
+
+Changed rmtxop so it writes out same type as lesser of inputs unless
+directed otherwise using -f? option.
+
+Changed order of oconv arguments in rfluxmtx so user can specify input
+octree using -i option at the end instead of (or in addition to) a
+list of scene files.
+
+Added support for argument expansion to rfluxmtx and bug fixes.
+
+Fixed bug in indirect hemisphere sampling for some corner cases.
+
+Added default specular lobe to BSDF interpolation.
+
+Set minimum number of shadow checks before direct optimization (4).
+
+(Above changes included in 4.2.1 patch release.)
+
+****** COMPATIBILITY CHANGE ********
+Made header input and output the default behavior for dctimestep and
+genskyvec.
+
+****** COMPATIBILITY CHANGE ********
+Changed pabopto2bsdf default behavior to add 90-degree rotation
+to bring pgII's definition of "up" in line with Klems axis
+conventions.  Introduced a new header variable "upphi" to
+control this added rotation.  Using "#upphi 90" in each
+BSDF input file gets back the original behavior, where it
+assumes that the up direction is 90-degrees from the X-axis.
+The default value of 0 corresponds to PAB's definition of
+the X-axis as being "up".
+
+Fixed bug in rsensor related to having many rows (altitude) and
+few columns (azimuth) in sensitivity file.
+
+Fixed floating point round-off error in new Hessian calculation
+for some sytems (Windows, primarily).
+
+Fixed bug in tensor tree BSDF code that caused bus error on
+some systems, and may have been source of other errors as well.
+
+(Above changes included in 4.2.2 patch release.)
+
+Improved ambient extrapolation to avoid zero values.  Actual
+threshold set to 5% of recorded value.
+
+Changed anisotropic Gaussian and Ashikhmin models so that
+illegal orientation vectors are dealt with more gracefully.
+
+Created wrapBSDF tool and incorporated into genBSDF along
+with new rfluxmtx computation.
+
+Initial check-in of Roland Schregle's photon map integration.
+New 5.0a version designation as suggested by Andy McNeil.
+
+Added left-hand coordinate sytems to rfluxmtx to correct
+problems with coordinate axis orientations pointed out by
+David Geisler-Moroder.
+
+Added color output to genBSDF (+C option) and support for
+color rendering of Klems and tensor tree data.
+
+Fixed another bug in rsensor that caused rays to be generated
+on opposite side of hemisphere even where sensitivity was zero.
+
+Fixed bug discovered by Jacob Jonsson in Klems BSDF
+interpolator that caused it to over-predict normal
+transmittance and reflectance.
+
+Added ability to read input from commands in dctimestep
+and rmtxop.
+
+Added photon map support to rad.  Fixed some double-counting
+issues in photon-mapping spotted by David Geisler-Moroder.
+
+Added photon map support to trad.
+
+Fixed bug in antimatter source testing when antimatter
+definition follows potential obstructor in input.
+
+Fixed issue with missing character type identifier at head
+of genBSDF XML output.
+
+Prompted by Roland S., added option to have pcompos -a order
+rows from top rather than bottom of image.
+
+Changed dctimestep to accept matrix as well as BTDF input
+in the VTDs invocation mode.  This permits the output of
+rmtxop to be used in a pinch when combining multiple BTDF
+layers, although interreflection between layers is not
+accounted for properly as it is in the WINDOW program.
+
+Added Jan Wienold et al.'s evalglare to distribution.
+
+Hopeful fix to deadlock issue under Mac OS X 10.10.x (Yosemite).
+
+Fixed early exit of rcontrib with internal error (sample behind sender)
+discovered by Rob G.
+
+=================================
+Version 5.1
+
+Fixed issue with vchars.mta and symbols.mta not being installed in
+the appropriate metafile library location, with help from Rob G.
+
+Added ability to give quoted strings to output= directive in rfluxmtx.
+
+****** COMPATIBILITY CHANGE ********
+Added ability to digest color (CIE-XYZ) input in pabopto2bsdf.
+This change alters the .sir (interpolant) format, so these files
+will need to be regenerated.  Use the new "#colorimetry: CIE-XYZ" tag
+to enable on input.