[ViewVC] Diff of: Development/ray/doc/notes/ReleaseNotes

Comparing ray/doc/notes/ReleaseNotes (file contents):
Revision 1.228 by greg, Thu Dec 19 16:38:12 2013 UTC vs.
Revision 1.286 by greg, Thu Sep 15 22:34:41 2016 UTC

+driver for rvu, which is built in the new subdirectory src/qtrvu.
+=====================
-<
+Version 4.2
->
+Version 4.2 (Release date 7/31/2014)
+Axel Jacobs added -cp and -palettes options to falsecolor.
+Made it so icalc and rcalc search RAYPATH directories for *.cal files
+given on command line.  This simplifies script writing and makes these
+utilities consistent with other tools in Radiance.
-+
-+
+Added triangulation routine to handle convex polygons in obj2mesh.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Made backface visibility apply to all material types, including
-+
+transparent and translucent materials (except dielectric and interface).
-+
+This makes the option useful in cases where adjacent trans surfaces
-+
+are placed next to each other by a modeler that only understands
-+
+volumetric objects.
-+
-+
+Changed dctimestep so that output matrices (-n > 1) are preceded by a
-+
+header, and added support for float and double output formats with -o[fd].
-+
-+
+Introduced eplus_adduvf program to compute user view factors for EnergyPlus.
-+
-+
+Changed image-plane sampling in rpict to use Hilbert curve, which gives
-+
+less of a brushed/striped appearance to output pixels with -u- (default).
-+
-+
+Added ltview and ltpict Perl scripts contributed by Axel Jacobs, inspired
-+
+by Rob Guglielmetti.
-+
-+
+Added header variables for NROWS, NCOLS and NCOMP to help standardize
-+
+matrix files.  This functionality has been incorporated into
-+
+rcollate, gendaymtx, and dctimestep.
-+
-+
+Created rmtxop utility to operate on multi-component matrices.  This
-+
+facilitates some daylight matrix calculations, and provides a general
-+
+tool for manipulating matrix data.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Introduced new Hessian-based error control in irradiance caching (ambient)
-+
+calculation.  Since the format of the stored ambient values is different,
-+
+the old files will be rejected with an error message and must be removed.
-+
+The programs may be compiled with the -DOLDAMB option if this is a problem.
-+
-+
+Added -p option to rcontrib to set function file parameters on a per-modifier
-+
+basis to simplify bin evaluation.
-+
-+
+Created rfluxmtx program to compute flux transfer matrices from a sender
-+
+surface to one or more receiver surfaces.  (Renamed the file klems_int.cal
-+
+to klems_full.cal in the process.)
-+
-+
+Added "-c" option to getinfo to execute command on data segment.
-+
-+
+================================
-+
+Version 5.0 (Released 9/18/2015)
-+
-+
+Changed rmtxop so it writes out same type as lesser of inputs unless
-+
+directed otherwise using -f? option.
-+
-+
+Changed order of oconv arguments in rfluxmtx so user can specify input
-+
+octree using -i option at the end instead of (or in addition to) a
-+
+list of scene files.
-+
-+
+Added support for argument expansion to rfluxmtx and bug fixes.
-+
-+
+Fixed bug in indirect hemisphere sampling for some corner cases.
-+
-+
+Added default specular lobe to BSDF interpolation.
-+
-+
+Set minimum number of shadow checks before direct optimization (4).
-+
-+
+(Above changes included in 4.2.1 patch release.)
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Made header input and output the default behavior for dctimestep and
-+
+genskyvec.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed pabopto2bsdf default behavior to add 90-degree rotation
-+
+to bring pgII's definition of "up" in line with Klems axis
-+
+conventions.  Introduced a new header variable "upphi" to
-+
+control this added rotation.  Using "#upphi 90" in each
-+
+BSDF input file gets back the original behavior, where it
-+
+assumes that the up direction is 90-degrees from the X-axis.
-+
+The default value of 0 corresponds to PAB's definition of
-+
+the X-axis as being "up".
-+
-+
+Fixed bug in rsensor related to having many rows (altitude) and
-+
+few columns (azimuth) in sensitivity file.
-+
-+
+Fixed floating point round-off error in new Hessian calculation
-+
+for some sytems (Windows, primarily).
-+
-+
+Fixed bug in tensor tree BSDF code that caused bus error on
-+
+some systems, and may have been source of other errors as well.
-+
-+
+(Above changes included in 4.2.2 patch release.)
-+
-+
+Improved ambient extrapolation to avoid zero values.  Actual
-+
+threshold set to 5% of recorded value.
-+
-+
+Changed anisotropic Gaussian and Ashikhmin models so that
-+
+illegal orientation vectors are dealt with more gracefully.
-+
-+
+Created wrapBSDF tool and incorporated into genBSDF along
-+
+with new rfluxmtx computation.
-+
-+
+Initial check-in of Roland Schregle's photon map integration.
-+
+New 5.0a version designation as suggested by Andy McNeil.
-+
-+
+Added left-hand coordinate sytems to rfluxmtx to correct
-+
+problems with coordinate axis orientations pointed out by
-+
+David Geisler-Moroder.
-+
-+
+Added color output to genBSDF (+C option) and support for
-+
+color rendering of Klems and tensor tree data.
-+
-+
+Fixed another bug in rsensor that caused rays to be generated
-+
+on opposite side of hemisphere even where sensitivity was zero.
-+
-+
+Fixed bug discovered by Jacob Jonsson in Klems BSDF
-+
+interpolator that caused it to over-predict normal
-+
+transmittance and reflectance.
-+
-+
+Added ability to read input from commands in dctimestep
-+
+and rmtxop.
-+
-+
+Added photon map support to rad.  Fixed some double-counting
-+
+issues in photon-mapping spotted by David Geisler-Moroder.
-+
-+
+Added photon map support to trad.
-+
-+
+Fixed bug in antimatter source testing when antimatter
-+
+definition follows potential obstructor in input.
-+
-+
+Fixed issue with missing character type identifier at head
-+
+of genBSDF XML output.
-+
-+
+Prompted by Roland S., added option to have pcompos -a order
-+
+rows from top rather than bottom of image.
-+
-+
+Changed dctimestep to accept matrix as well as BTDF input
-+
+in the VTDs invocation mode.  This permits the output of
-+
+rmtxop to be used in a pinch when combining multiple BTDF
-+
+layers, although interreflection between layers is not
-+
+accounted for properly as it is in the WINDOW program.
-+
-+
+Added Jan Wienold et al.'s evalglare to distribution.
-+
-+
+Hopeful fix to deadlock issue under Mac OS X 10.10.x (Yosemite).
-+
-+
+Fixed early exit of rcontrib with internal error (sample behind sender)
-+
+discovered by Rob G.
-+
-+
+=================================
-+
+Version 5.1
-+
-+
+Fixed issue with vchars.mta and symbols.mta not being installed in
-+
+the appropriate metafile library location, with help from Rob G.
-+
-+
+Added ability to give quoted strings to output= directive in rfluxmtx.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Added ability to digest color (CIE-XYZ) input in pabopto2bsdf.
-+
+This change alters the .sir (interpolant) format, so these files
-+
+will need to be regenerated.  Use the new "#colorimetry: CIE-XYZ" tag
-+
+to enable on input.
-+
-+
+Rewrote bsdf2klems to support tristimulus color and call wrapBSDF.
-+
+Did the same for bsdf2ttree.  Function specifications still gray only.
-+
-+
+Reduced a problem where rvu or rholo would be slow to quit when
-+
+run with many processes on a large model or one with a large
-+
+ambient file (taking lots of memory).  We were waiting for
-+
+processes to quit one-by-one, which takes some time for each
-+
+process as it disentangles its shared memory.  We now
-+
+wait for all the processes together, so they can disentangle
-+
+in parallel.  It can still take up to a minute in some cases,
-+
+but not 10 minutes like it was taking before the fix.
-+
-+
+Enabled ambient cache value corral for all levels, not just final two.
-+
+This may reduce errors in certain pathological scenes.
-+
-+
+Added -in option to rcalc, rlam, and total to limit the number of
-+
+input records in hopes of circumventing Windows EOF issues on binary data.
-+
+Also added -on option to rcalc and total for logical symmetry.
-+
-+
+Increased modifier limit to 10,000 in rcontrib.
-+
-+
+Fixed issues with glrad and added zoom response to mouse wheel input.
-+
-+
+Added missing definition of "ashik2" material type to reference manual.
-+
-+
+Changed genBSDF to calculate device thickness assuming Zmax==0 so
-+
+pkgBSDF will generate correct proxy geometry.
-+
-+
+Created pabopto2xyz tool to combine different sensor measurements
-+
+into a single CIE-XYZ measurement file for color BSDF interpolation.
-+
-+
+Jan Wienold updated evalglare to version 1.30
-+
-+
+Roland Schregle added out-of-core photon mapping routines, which
-+
+may be compiled using the PMAP_OOC macro.
-+
-+
+Added -a option to getinfo for easy addition of header lines.
-+
-+
+Fixed issue with multiple records on picture output in rcontrib (and rfluxmtx).
-+
+Credit to Sarith Subramaniam for pointing out the problem.
-+
-+
+Made mkillum more tolerant of non-planar polygons in its sampling routines.

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing ray/doc/notes/ReleaseNotes (file contents): Revision 1.228 by greg, Thu Dec 19 16:38:12 2013 UTC vs. Revision 1.286 by greg, Thu Sep 15 22:34:41 2016 UTC

Diff Legend

Comparing ray/doc/notes/ReleaseNotes (file contents):
Revision 1.228 by greg, Thu Dec 19 16:38:12 2013 UTC vs.
Revision 1.286 by greg, Thu Sep 15 22:34:41 2016 UTC