[ViewVC] Diff of: Development/ray/doc/notes/ReleaseNotes

Comparing ray/doc/notes/ReleaseNotes (file contents):
Revision 1.105 by greg, Sun Sep 25 20:36:02 2005 UTC vs.
Revision 1.153 by greg, Sat Dec 6 01:08:52 2008 UTC

+Rearranged struct's for better efficiency on 64-bit architectures.
+Added -i option to rlam so it works with binary input formats.
-+
-+
+Added rtcontrib -bn option to specify number of bins and fixed bug
-+
+in recovery of files containing multiple values per record.
-+
-+
+Added rtcontrib -fo option to write over existing files, which it now
-+
+refuses to do without this option.
-+
-+
+Made rtcontrib flush output when handed a zero-length ray vector,
-+
+to match behavior of rtrace.
-+
-+
+Improved color scale for falsecolor output.
-+
-+
+Added threshold test for Fresnel approximation to prevent its use
-+
+on smooth surfaces with unrealistically low specularities (less than 1.8%).
-+
+Water has a specular reflectance of 2.1% at room temperture.
-+
-+
+Removed NICE macro settings in rpict and rtrace, which was slowing down
-+
+the processes under Mac OS X (10.4) by about 60% due to processor napping.
-+
-+
+Made xform, replmarks and rad2mgf handle quoted modifiers and names properly.
-+
-+
+Fixed problem in genblinds, where it was generating slats that were too
-+
+wide with the +/-r option.  (Thanks to Helena Buelow-Huebe for discovering
-+
+this bug.)
-+
-+
+Fixed bug in ra_ppm for 16-bit/sample i/o, where it was getting the byte
-+
+order wrong (apparently).
-+
-+
+Added -V option to rtcontrib to report actual contributions, rather than
-+
+just ray coefficients.
-+
-+
+Fixed bug in ranimate that caused it to fail in continuation of renderings.
-+
-+
+Renamed librt.a to librtrad.a, to avoid conflict on Solaris. Almost
-+
+everything now gets linked to -lrtrad instead of -lrt.
-+
-+
+Fixed problem with large sample sets, so -u+ option now is truly random.
-+
+Thanks to Rick Mistrick and Younju Yoon for identifying this problem,
-+
+which was related to a poorly designed hash function.
-+
-+
+Changed -u+ to be the default setting in rtrace (only).
-+
-+
+Fixed binary i/o for rlam and vwrays under Windows.
-+
-+
+Added tmCvLums() to tone-mapping routines using a 16-bit lookup table
-+
+on IEEE floats, which is also used to improve speed of COLOR conversions,
-+
+especially on machines with slow log() calls.  The first call to
-+
+tmCvLums(), tmCvGrays(), or tmCvColors() initializes the table.
-+
-+
+Created optics2rad.csh script to convert from Optics 5 material output
-+
+to something correct for Radiance.  Built on old glazing.cal function,
-+
+which is actually incorrect so removed from the distribution.
-+
-+
+Fixed nuisance bug in ximage under some SGI machines that caused it to
-+
+choose an inappropriate visual and display incorrect colors.  (Thanks
-+
+to Oskar Itzinger for debugging the problem.)
-+
-+
+Fixed long-standing inaccuracy of pcompos -t and +t thresholding options.
-+
-+
+Fixed bug in handling of views with tabs rather than spaces.
-+
-+
+Fixed bug related to alias of alias.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed default sky turbidity in gensky from the original default of
-+
+.75 to the CIE 110-1994 standard value of 2.45.  Thanks to Marilyne
-+
+Anderson of MIT for pointing out this discrepancy.
-+
-+
+Added -o option to ra_xyze to produce original pixel values.
-+
-+
+Fixed bug in tracing of virtual sources, where intervening glazing was
-+
+not being accounted for properly.
-+
-+
+Added -h option to pcompos and pcomb to eliminate verbose headers.
-+
-+
+=====================
-+
+Version 3.9
-+
-+
+Added -spec option to falsecolor to restore original spectral color scale.
-+
+Also added "-s auto" option to automatically set the maximum value.
-+
-+
+Added byte-swapping input and output to rcalc.
-+
-+
+Additional error-checking for source surfaces.
-+
-+
+Re-fixed bug in octree code that caused it to allocate 8 times as
-+
+much memory as it actually used(!) -- this was pointed out way back
-+
+in 1999 by Erik Reinhard and Erik Jansen, but the fix they gave me
-+
+got lost in the slightly broken release process at the time.  This
-+
+should make a big difference in memory usage, especially for the
-+
+new mesh primitive.  (I measured 30% less memory usage.)
-+
-+
+Corrected ray weights for material mixtures.
-+
-+
+Reduced the default -n setting for obj2mesh to take better advantage
-+
+of the smaller octree structure size.
-+
-+
+Fixed bug in shadow cache where it was adding surfaces with antimatter
-+
+holes cut in them to the obstructor list.  Thanks to John Mardaljevic
-+
+for discovering and reporting the problem.
-+
-+
+Adding ability in mkillum to incorporate BSDF data in calculation.
-+
+Internal interface (raypcalls) now used in place of rtrace process(es).
-+
-+
+Fixed pixel alignment in pcomb for size reduction and enlargement.
-+
-+
+Allow rtcontrib user to set -P and -PP options for persistent rendering.
-+
+The only caveat is that -n setting > 1 requires -PP rather than -P.
-+
-+
+Added -c option to rtcontrib to facilitate cumulative calculations.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Fixed long-standing bug in source.cal, which caused it to produce
-+
+reversed anisotropic photometric distributions due to the
-+
+misorientation of the y-axis.  Thanks to Zack Rogers for discovering
-+
+and helping debug this problem.
-+
-+
+Fixed long-standing bug in replmarks, where triangles with X-side
-+
+aligned with Z-axis would cause incorrect rotations.  Thanks to
-+
+Zack Rogers for finding this error.
-+
-+
+Added rsensor program to compute sensor signal for daylighting controls.
-+
+Funding for this component was provided by the Architectural Energy
-+
+Corporation in Boulder, CO, and directed by Zack Rogers.
-+
-+
+Added "planisphere" (stereographic) fisheye view type for traditional
-+
+daylighting analysis.  Feature requested & explained by Axel Jacobs.
-+
-+
+Modified -c option to rtcontrib so it can take a number of input
-+
+rays to average over, rather than only produce a single accumulated
-+
+record (which can now be done with -c 0).
-+
-+
+=====================
-+
+Version 4.0
-+
-+
+Added -n option to rvu to provide parallel rendering.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed ".pic" extension to ".hdr" in all sources and documentation
-+
+to improve interoperability with other software, since this has become
-+
+the de facto extension for Radiance RGBE and XYZE pictures.  Since file
-+
+extensions were never more than a convention in Radiance, this does not
-+
+affect operation, but may require the update of scripts, etc. written
-+
+by others that assume the ".pic" suffix for Radiance output.
-+
-+
+Added -N option to objview to support multiprocessing.
-+
-+
+Improved sampling of circular sources (source, sphere, ring types) with
-+
+quite a bit of help from David Geisler-Moroder.

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing ray/doc/notes/ReleaseNotes (file contents): Revision 1.105 by greg, Sun Sep 25 20:36:02 2005 UTC vs. Revision 1.153 by greg, Sat Dec 6 01:08:52 2008 UTC

Diff Legend

Comparing ray/doc/notes/ReleaseNotes (file contents):
Revision 1.105 by greg, Sun Sep 25 20:36:02 2005 UTC vs.
Revision 1.153 by greg, Sat Dec 6 01:08:52 2008 UTC