[ViewVC] Diff of: Development/ray/doc/notes/ReleaseNotes

Comparing ray/doc/notes/ReleaseNotes (file contents):
Revision 1.128 by greg, Tue Aug 22 21:38:21 2006 UTC vs.
Revision 1.190 by greg, Wed Oct 26 03:44:56 2011 UTC

+the stack limit.
+==============================
-<
+Version 3.6
->
+Version 3.6 (Released 10/21/04)
+Modified 4-byte RGBE encoding routine to avoid problems
+when one or two primary values is negative and the other(s)
+correctly.
+=====================
-<
+Version 3.7
->
+Version 3.7 (Released 7/25/05)
+Fixed bug in source occluder cache which caused consistency error
+for distant sources and mist materials.  (Thanks to Mark Stock for
+behavior so I documented it rather than changing it.
+=====================
-<
+Version 3.8
->
+Version 3.8 (Released 10/17/06)
+Fixed Russian roulette ray termination, which was doing the opposite of
+what it should have been doing, resulting in overestimated values below
+Anderson of MIT for pointing out this discrepancy.
+Added -o option to ra_xyze to produce original pixel values.
-+
-+
+Fixed bug in tracing of virtual sources, where intervening glazing was
-+
+not being accounted for properly.
-+
-+
+Added -h option to pcompos and pcomb to eliminate verbose headers.
-+
-+
+=====================
-+
+Version 3.9 (Released 3/30/08)
-+
-+
+Added -spec option to falsecolor to restore original spectral color scale.
-+
+Also added "-s auto" option to automatically set the maximum value.
-+
-+
+Added byte-swapping input and output to rcalc.
-+
-+
+Additional error-checking for source surfaces.
-+
-+
+Re-fixed bug in octree code that caused it to allocate 8 times as
-+
+much memory as it actually used(!) -- this was pointed out way back
-+
+in 1999 by Erik Reinhard and Erik Jansen, but the fix they gave me
-+
+got lost in the slightly broken release process at the time.  This
-+
+should make a big difference in memory usage, especially for the
-+
+new mesh primitive.  (I measured 30% less memory usage.)
-+
-+
+Corrected ray weights for material mixtures.
-+
-+
+Reduced the default -n setting for obj2mesh to take better advantage
-+
+of the smaller octree structure size.
-+
-+
+Fixed bug in shadow cache where it was adding surfaces with antimatter
-+
+holes cut in them to the obstructor list.  Thanks to John Mardaljevic
-+
+for discovering and reporting the problem.
-+
-+
+Adding ability in mkillum to incorporate BSDF data in calculation.
-+
+Internal interface (raypcalls) now used in place of rtrace process(es).
-+
-+
+Fixed pixel alignment in pcomb for size reduction and enlargement.
-+
-+
+Allow rtcontrib user to set -P and -PP options for persistent rendering.
-+
+The only caveat is that -n setting > 1 requires -PP rather than -P.
-+
-+
+Added -c option to rtcontrib to facilitate cumulative calculations.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Fixed long-standing bug in source.cal, which caused it to produce
-+
+reversed anisotropic photometric distributions due to the
-+
+misorientation of the y-axis.  Thanks to Zack Rogers for discovering
-+
+and helping debug this problem.
-+
-+
+Fixed long-standing bug in replmarks, where triangles with X-side
-+
+aligned with Z-axis would cause incorrect rotations.  Thanks to
-+
+Zack Rogers for finding this error.
-+
-+
+Added rsensor program to compute sensor signal for daylighting controls.
-+
+Funding for this component was provided by the Architectural Energy
-+
+Corporation in Boulder, CO, and directed by Zack Rogers.
-+
-+
+Added "planisphere" (stereographic) fisheye view type for traditional
-+
+daylighting analysis.  Feature requested & explained by Axel Jacobs.
-+
-+
+Modified -c option to rtcontrib so it can take a number of input
-+
+rays to average over, rather than only produce a single accumulated
-+
+record (which can now be done with -c 0).
-+
-+
+=====================
-+
+Version 4.0 (Released 3/12/10)
-+
-+
+Added -n option to rvu to provide parallel rendering.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed ".pic" extension to ".hdr" in all sources and documentation
-+
+to improve interoperability with other software, since this has become
-+
+the de facto extension for Radiance RGBE and XYZE pictures.  Since file
-+
+extensions were never more than a convention in Radiance, this does not
-+
+affect operation, but may require the update of scripts, etc. written
-+
+by others that assume the ".pic" suffix for Radiance output.
-+
-+
+Added -N option to objview to support multiprocessing.
-+
-+
+Improved sampling of circular sources (source, sphere, ring types) with
-+
+quite a bit of help from David Geisler-Moroder.
-+
-+
+Added "rpict" and "rvu" variables to rad, and made these as well as
-+
+the "oconv", "mkillum" and "pfilt" variables accept an alternate
-+
+command path in each case.  Change suggested by Lars Grobe based
-+
+on similar Radzilla (radz) facility by Carsten Bauer.
-+
-+
+Fixed rad -v N specification to use actual view name if one.
-+
-+
+Fixed error in mkillum calculation where it neglected indirect
-+
+source contributions from BTDF illum's.
-+
-+
+Added GMT and LATLONG header lines for Greenwich Mean Time and
-+
+degrees North Latitude / East Longitude.
-+
-+
+Added gendaylit to distribution (finally).
-+
-+
+Added ability in vwright(1) to get view from command line arguments.
-+
-+
+Created genklemsamp(1) utility to generate samples suitable for
-+
+BSDF-based annual calculations.  This is the first Perl script to
-+
+be added to Radiance.  Hopefully, others will follow.
-+
-+
+Added klems_int.cal file to compute Klems bins for windows.
-+
-+
+Created genskyvec  utility to sample a particular sky and
-+
+evaluate average radiance over the standard Tregenza sky patches.
-+
-+
+Created dctimestep program to compute a set of sensor values or
-+
+a combined image for a particular time using the daylight
-+
+coefficient method.
-+
-+
+Created src/rt/rayfifo.c for first-in/first-out handling of
-+
+multiprocessing by raypcalls.c.
-+
-+
+Added -n option to rtrace for executing on multiple cores
-+
+using new rayfifo calls.
-+
-+
+=====================
-+
+Version 4.1
-+
-+
+Changed ranimate behavior so remote login under a different user
-+
+doesn't necessarily require the presence of the originating user's
-+
+home directory.
-+
-+
+Changed standard transmission function normalization back to what
-+
+it was in version 3.5, following recommendation of David Geisler-Moroder,
-+
+who pointed out that the revised BTDF increased too much at grazing.
-+
-+
+Changed rad behavior with -N >1 on single view to call rpiece.
-+
-+
+Updated SCons build system for MINGW compilation, thanks to Christian
-+
+Kohler.
-+
-+
+Added -u option to rlam for unbuffered output.
-+
-+
+Modified dctimestep to accept sky vector and daylight coefficient matrix
-+
+or list of images to sum together, as suggested by Andy McNeil.
-+
-+
+Created genBSDF script to generate BSDF in Windows XML format.
-+
-+
+Modified mkillum to accept detailed geometry from BSDF XML files.
-+
-+
+Altered obj2rad to ignore zero normals (thanks to Jack de Valpine for
-+
+suggestions and help).
-+
-+
+Fixed bug in genklemsamp that caused non-uniform sampling over surfaces.
-+
-+
+Fixed bugs in rhoptimize and rhcopy for 64-bit compilation.
-+
-+
+Made a change to avoid problem using gcc --fast-math compile option.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed behavior of rtrace and rtcontrib so that every scanline is
-+
+not flushed when both -x and -y are set.  This avoids flush delays
-+
+in rtcontrib for large numbers of output files and delays while
-+
+rendering images using rtrace with the -n option.
-+
-+
+Added ability for rsensor to output ray origins and directions
-+
+rather than actually loading octree and computing sensor value.
-+
-+
+Fixed old bug in obj2rad where it would stop processing and
-+
+report a syntax error if the "void" type is used in the map file.
-+
-+
+Updated reflection model according to EGSR 2010 paper by David
-+
+Geisler-Moroder and Arne Duer.
-+
-+
+Replaced C-shell version of falsecolor with Perl script written
-+
+by Axel Jacobs.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed -sj (specular jitter) option to something called specular
-+
+sampling (-ss), which if set less than 1 has the same behavior as
-+
+the old -sj, but when set greater than 1, spawns multiple ray
-+
+samples from semi-specular surfaces.
-+
-+
+Fixed bug noticed by Randolph Fritz that caused ambient sync errors.
-+
-+
+Fixed bug in findglare for reading picture files under Windows.
-+
-+
+Added options to pvalue to note other color spaces on reverse conversion.
-+
+Thanks to Erich Philips for the feature request.
-+
-+
+Added BSDF data-driven material type with full sampling support.
-+
-+
+Added BRDF calculations to genBSDF.
-+
-+
+Bug fixes in rsensor thanks to help from David Geisler-Moroder.
-+
-+
+Added variable-resolution BSDF support in renderers and genBSDF.
-+
-+
+Created pkgBSDF program to extract BSDF geometry and put it
-+
+together with surface description suitable for inclusion in
-+
+a Radiance scene.
-+
-+
+Muted warning for "no light sources found" when there is at least
-+
+one glow object and interreflections are on (-ab > 0).
-+
-+
+Fixed long-standing bug that caused underestimation of reflection
-+
+when specular component was below -st threshold in non-metals.

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing ray/doc/notes/ReleaseNotes (file contents): Revision 1.128 by greg, Tue Aug 22 21:38:21 2006 UTC vs. Revision 1.190 by greg, Wed Oct 26 03:44:56 2011 UTC

Diff Legend

Comparing ray/doc/notes/ReleaseNotes (file contents):
Revision 1.128 by greg, Tue Aug 22 21:38:21 2006 UTC vs.
Revision 1.190 by greg, Wed Oct 26 03:44:56 2011 UTC