--- ray/doc/notes/ReleaseNotes	2004/09/20 17:32:04	1.48
+++ ray/doc/notes/ReleaseNotes	2005/01/07 20:33:01	1.61
@@ -1256,7 +1256,7 @@ Added -I option to replmarks for mesh instancing.
 Made similar change for virtual sources to allow modifiers and aliases
 on the mirror and prism types to work properly.
 
-Rob Guglielmetti dded -lw and -lh options to falsecolor to control the
+Rob Guglielmetti added -lw and -lh options to falsecolor to control the
 legend dimensions.  Made it so -lw 0 and/or -lh 0 turns legend off.
 
 Made it so pcompos will read everything from a stream even if it doesn't
@@ -1296,7 +1296,7 @@ Fixed a very obscure bug in rpict that caused a dark h
 line in certain cylindrical projections due to improper drawing
 of the sky dome source in rt/srcdraw.c.
 
-Fixed problems with effective ray lenths computed for dielectric
+Fixed problems with effective ray lengths computed for dielectric
 and BRTDfunc materials.  This was most evident in breakup of holodeck
 views when VDISTANCE=True.
 
@@ -1327,3 +1327,64 @@ This was a serious mistake I made in the original mode
 undiscovered (at least to my knowledge) for over a decade.  I think
 Bruce Walter of Cornell may have known about it, but I never heard
 the details of his discovery.
+
+Enabled the -p option for primary conversion without tone-mapping
+in ra_bmp.  Also provides for XYZE input conversion to RGB.
+
+Fixed what I consider a bug in pvalue -o when taking XYZE files on input,
+where it was inappropriately undoing the exposure value so that it always
+reported radiance rather than XYZ values with Y in cd/m^2.
+
+Made it so ra_bmp only produces run-length encoded 8-bit output for
+grayscale images that are tone-mapped.  This minimizes circumstances
+under which output scanline order is reversed.
+
+Fixed bug in rcalc where it sometimes wasn't parsing the input format
+correctly.
+
+=====================
+Version 3.7
+
+Fixed bug in source occluder cache which caused consistency error
+for distant sources and mist materials.  (Thanks to Mark Stock for
+finding the problem.)
+
+Fixed serious bug in source drawing routines for rpict, where the edges
+of light sources were appearing through obstructions.  (Thanks to Veronica
+Sundstedt for pointing this out.)
+
+(The above were included in the 3.6.1 patch release.)
+
+Changed default temporary directory from /usr/tmp, which doesn't exist
+on a lot of systems these days, to /tmp.
+
+Eliminated many unused files and programs from the distribution, including
+the following programs that were being built but no longer used:
+	oki20	- printer driver for OkiMate 20 printer (B&W)
+	oki20c	- printer driver for OkiMate 20 color printer
+	pcwarp	- intended as more general substitute for macbetcal,
+			but never quite worked
+	ra_avs	- convert to & from AVS image format
+	ra_bn	- convert to & from Barneyscann format
+	ra_pr	- convert to & from 8-bit Sun rasterfile format
+	ra_pr24	- convert to & from 24-bit Sun rasterfile format
+	thf2rad	- convert GDS "things file" to Radiance scene format
+If anyone is still wanting any of the above programs, let us know and we'll
+reinstate it.
+
+Fixed bug in pcond's acuity simulation for small view angles (less than
+4 degrees horizontally or vertically).  Thanks to James Lee for figuring
+this out.
+
+Added script to convert to/from ICT's Poskanzer Float Map, which I don't
+care to support officially due to its machine-dependent byte order.
+
+Fixed bug that caused incorrect reporting of non-surface in set when
+mixing meshes and instances.  (Thanks to Jack de Valpine for discovery.)
+
+Fixed innacuracy in calculation of diffuse transmission in the presence
+of pure specular (Fresnel reflection) using "trans" material.  Thanks
+to Christoph Reinhart for pointing out the error.
+
+Made internal change to tone-mapping library to use structure pointer
+rather than stack, making code re-entrant and more up to modern standards.