| 2237 |
|
colored sky option. |
| 2238 |
|
|
| 2239 |
|
========================= |
| 2240 |
< |
Version 5.3 |
| 2240 |
> |
Version 5.3 (Released September 1, 2020) |
| 2241 |
> |
|
| 2242 |
> |
Created radcompare program to compare Radiance tool output to reference outputs |
| 2243 |
> |
during unit-testing. |
| 2244 |
> |
|
| 2245 |
> |
Fixed issue reading very large files (> 2 GBytes) in rcollate. |
| 2246 |
> |
|
| 2247 |
> |
Made picking function in rvu ignore transparent and void surfaces. |
| 2248 |
> |
|
| 2249 |
> |
Added -orRxX options to rtrace to enable output of mirrored and unmirrored |
| 2250 |
> |
contributions and distances to enable new types of reprojections. This also |
| 2251 |
> |
cleaned up and unified handling of effective ray lengths throughout code. |
| 2252 |
> |
|
| 2253 |
> |
Bug fixes from Jan Wienold for evalglare. |
| 2254 |
> |
|
| 2255 |
> |
Changed indexed (numbered) output from dctimestep to start from 0 rather |
| 2256 |
> |
than 1, to make it more consistent with expected input naming. |
| 2257 |
> |
|
| 2258 |
> |
Increased default sampling in bsdf2klems (-n option) to 1024. |
| 2259 |
> |
|
| 2260 |
> |
Fixed an issue noticed by David G-M that was causing genBSDF to bias |
| 2261 |
> |
isotropic tensor tree samples resulting in subsequent failure of |
| 2262 |
> |
peak extraction with "aBSDF" type. |
| 2263 |
> |
|
| 2264 |
> |
Introduced max() and min() functions to .cal library. |
| 2265 |
> |
|
| 2266 |
> |
Added random incident patch sampling to bsdf2klems to improve accuracy |
| 2267 |
> |
with scattering interpolation representation input (e.g., from |
| 2268 |
> |
pabopto2bsdf). The other input types already sampled incident patch area. |
| 2269 |
> |
|
| 2270 |
> |
Added gendaymtx -A option to compute average sky over all the input |
| 2271 |
> |
time steps. |
| 2272 |
> |
|
| 2273 |
> |
Added ability to output color image from rtrace with any of -ovrx options. |
| 2274 |
> |
Also fixed inconsistency of -oN output when ray casting versus full trace. |
| 2275 |
> |
Before, it would flip normal to front side unless ray casting. Now, -oN |
| 2276 |
> |
always reports the unflipped normal. |
| 2277 |
> |
|
| 2278 |
> |
Changed rlam behavior so -iaN reads N lines from a stream rather than N |
| 2279 |
> |
characters. This seems more useful, since -ibN is somewhat redundant with |
| 2280 |
> |
the old behavior. |
| 2281 |
> |
|
| 2282 |
> |
Created rsplit program as compliment to rlam and to handle more complex |
| 2283 |
> |
rtrace output into separate files or streams. |
| 2284 |
> |
|
| 2285 |
> |
Improved getinfo so that it can also hop over resolution string with -c |
| 2286 |
> |
and header elide mode. Use +d to include resolution string in output, |
| 2287 |
> |
and -d to elide with - and -c options. |
| 2288 |
> |
|
| 2289 |
> |
Made pvalue -u option mean "uncompressed" with -r. Also, allow skipping |
| 2290 |
> |
bytes on standard input. |
| 2291 |
> |
|
| 2292 |
> |
Created rcode_depth tool to convert to and from a 16-bit/pixel portable |
| 2293 |
> |
depth image encoding that uses a mix of linear and reciprocal distance |
| 2294 |
> |
with explicit representations of 0 and infinity. Code for loading these |
| 2295 |
> |
depth maps is in src/common/depthcodec.{h,c}. |
| 2296 |
> |
|
| 2297 |
> |
Created rcode_norm tool to convert to and from 32-bit/pixel portable |
| 2298 |
> |
surface normal representation, matching the one in src/common/dircode.c. |
| 2299 |
> |
Code for loading normal maps is in src/common/normcodec.{h,c}. |
| 2300 |
> |
|
| 2301 |
> |
Created rcode_ident tool to create indexed identifier files. |
| 2302 |
> |
Code for loading these files is in src/common/idmap.{h,c}. |
| 2303 |
> |
|
| 2304 |
> |
Added -o* option to rtpict to produce layered images that handle most |
| 2305 |
> |
output types from rtrace (colors, surface normals, distances, IDs). |
| 2306 |
> |
|
| 2307 |
> |
Created rcode2bmp script to create images from new rcode_* output maps. |
| 2308 |
> |
|
| 2309 |
> |
Improved efficiency of rmtxop in cases where matrix multiplication is |
| 2310 |
> |
faster evaluated right-to-left, as when the final component is a |
| 2311 |
> |
column vector. Also added ability to apply trailing unary operators |
| 2312 |
> |
(-t, and -s or -c) to resulting matrix. |
| 2313 |
> |
|
| 2314 |
> |
Added new depth, normal, and ID file types to radcompare. |
| 2315 |
> |
|
| 2316 |
> |
Added BigEndian= header line for automatic byte-swapping in rmtxop |
| 2317 |
> |
and radcompare. |
| 2318 |
> |
|
| 2319 |
> |
Added new "turbo" palette to falsecolor (thanks to Taoning). |
| 2320 |
> |
|
| 2321 |
> |
Nathaniel Jones created the "dcglare" program for annual glare |
| 2322 |
> |
simulations when the sun and sky are visible through the window. |
| 2323 |
> |
Tutorial is posted at |
| 2324 |
> |
"https://github.com/nljones/Accelerad/wiki/The-Imageless-Method-for-Spatial-and-Annual-Glare-Analysis". |
| 2325 |
> |
|
| 2326 |
> |
Added support for loading RGBE images into matrices in dctimestep. |
| 2327 |
> |
|
| 2328 |
> |
Added -y option to gensky and gendaylit to support more accurate Michalsky |
| 2329 |
> |
solar position calculation. |
| 2330 |
> |
|
| 2331 |
> |
Changed rsplit, so specifying a space as the separator parses words |
| 2332 |
> |
between whitespace. |
| 2333 |
> |
|
| 2334 |
> |
Added ability of vwrays, pinterp, and pmblur2 to read encoded depth files. |
| 2335 |
> |
|
| 2336 |
> |
Added -o RxCxR1xC1 facility to perform blocking in rcollate. |
| 2337 |
> |
|
| 2338 |
> |
Made it so number of segments in genworm, genrev, and gensurf can be |
| 2339 |
> |
given as expressions of previously defined variables, etc. |
| 2340 |
> |
|
| 2341 |
> |
Added -D and -n option to gendaymtx to output sun description and skip |
| 2342 |
> |
matrix output on request. A -M option was also added to output solar |
| 2343 |
> |
modifiers for rcontrib. Support also added for leap days in WEA input. |
| 2344 |
> |
Enhancements sponsored by Ladybug Tools. |
| 2345 |
> |
|
| 2346 |
> |
Updated eplus_uvf to work with IDF version 9.x, checking version number. |
| 2347 |
> |
|
| 2348 |
> |
Fix to glarendx issues with dgi calculation. |
| 2349 |
> |
|
| 2350 |
> |
Made it so rmtxop and dctimestep undo any exposure applied to Radiance |
| 2351 |
> |
pictures they may load. |
| 2352 |
> |
|
| 2353 |
> |
Added robjutil utility to manipulate Wavefront .OBJ files. |
| 2354 |
> |
|
| 2355 |
> |
Fixed a crash related to rtrace -om or -oM with mesh instances containing |
| 2356 |
> |
materials. |
| 2357 |
> |
|
| 2358 |
> |
Improved rtrace flushing function to handle any value for -x without |
| 2359 |
> |
deadlock on controlling process. |
| 2360 |
> |
|
| 2361 |
> |
Eliminated unnecessary start-up procedures for rtrace when only ray-casting |
| 2362 |
> |
is needed (i.e., no tracing or value output). |
| 2363 |
> |
|
| 2364 |
> |
Improved isotropic sampling method in bsdf2ttree using "zipper" approach |
| 2365 |
> |
applied in genBSDF. |
| 2366 |
> |
|
| 2367 |
> |
Added limit to memory used by high-resolution tensor tree BSDFs for |
| 2368 |
> |
cumulative cache during MC sampling (rendering). Limit set to 250MBytes |
| 2369 |
> |
per BSDF for standard architectures. |
| 2370 |
> |
|
| 2371 |
> |
Added -n and -s options to bsdf2ttree to provide some user control |
| 2372 |
> |
over super-sampling. |
| 2373 |
> |
|
| 2374 |
> |
Improved surface normal codec used by ambient file to store orthonormal |
| 2375 |
> |
directions exactly. |
| 2376 |
> |
|
| 2377 |
> |
Improved peak extraction method, which was undervaluing transmission |
| 2378 |
> |
in many cases. |
| 2379 |
> |
|
| 2380 |
> |
New version of evalglare from Jan Wienold. |
| 2381 |
> |
|
| 2382 |
> |
Added -u option to gendaymtx to elide data columns (time steps) when |
| 2383 |
> |
the sun is not visible above the horizon. |
| 2384 |
> |
|
| 2385 |
> |
========================= |
| 2386 |
> |
Version 5.4 |
| 2387 |
> |
|
| 2388 |
> |
Added rcollate -c option to force operation to continue even if it |
| 2389 |
> |
seems unnecessary. Made tool more robust. |
| 2390 |
> |
|
| 2391 |
> |
Added -t option to rcontrib (and rfluxmtx) to report progress after the |
| 2392 |
> |
given number of seconds. |
| 2393 |
> |
|
| 2394 |
> |
Added "test" target to makeall to run unit tests. |
| 2395 |
> |
|
| 2396 |
> |
Modified bsdf2ttree to allow different parameters per input SIR file. |
| 2397 |
> |
|
| 2398 |
> |
Fixed issues with very large matrix files (> 2GB) in dctimestep, rmtxop, |
| 2399 |
> |
and rcollate. |
| 2400 |
> |
|
| 2401 |
> |
Added -rf and -rb options to rmtxop to load front or back reflectance |
| 2402 |
> |
matrix data from XML file rather than transmission. (Lars Grobe suggested.) |
| 2403 |
> |
|
| 2404 |
> |
Improved behavior for coincident surfaces with different materials. |
| 2405 |
> |
Rather than returning one surface or the other based on floating-point |
| 2406 |
> |
vagaries, opaque materials are now preferred over transparent ones. |
| 2407 |
> |
If the materials are both transparent or both opaque, then whichever |
| 2408 |
> |
surface appeared later in the scene description will be selected. |
| 2409 |
> |
This came of a request for consistent behavior with legal CAD output |
| 2410 |
> |
from Peter Apian-Bennewitz. |
| 2411 |
> |
|
| 2412 |
> |
Added explicit tests for on-edge intersections with polygons. This should |
| 2413 |
> |
eliminate stray rays and tiny light leaks that often appear even in |
| 2414 |
> |
well-constructed geometry. |
| 2415 |
> |
|
| 2416 |
> |
Added "-s up" option to pabopto2bsdf to allow for 180 degree symmetry, |
| 2417 |
> |
meaning that data repeats after 180 degree rotation (as distinguished |
| 2418 |
> |
from "-s bilateral" whose data is mirrored about a vertical plane). |
| 2419 |
> |
Thanks to Helen Rose Wilson for the suggestion and informing me that |
| 2420 |
> |
such a thing exists. |
| 2421 |
> |
|
| 2422 |
> |
Removed upper limit on number of modifiers in rcontrib. |
| 2423 |
> |
|
| 2424 |
> |
Put cap on maximum ambient gradient to avoid over-extrapolation of |
| 2425 |
> |
poorly computed irradiance cache values. |
| 2426 |
> |
|
| 2427 |
> |
Added robjutil +T option to triangulate all faces in .OBJ description. |
| 2428 |
> |
|
| 2429 |
> |
Altered BSDF library to have both front and back diffuse transmittance |
| 2430 |
> |
values, which can be different. This was necessary to avoid issues |
| 2431 |
> |
caused by measurement and modeling discrepancies. |
| 2432 |
> |
|
| 2433 |
> |
Added pabopto2bsdf -g option to cull near-grazing scattering to avoid |
| 2434 |
> |
issues with noise and negative values. |
| 2435 |
> |
|
| 2436 |
> |
Increased default dynamic range from 32 to 100 in pcond and normtiff. |
| 2437 |
> |
|
| 2438 |
> |
Added -o and -n options to genbox to create .OBJ output and segment |
| 2439 |
> |
edges and corners for transparent materials. Also added -s option |
| 2440 |
> |
to control smoothing for .OBJ and Radiance with segmented rounding. |
| 2441 |
> |
|
| 2442 |
> |
Made it so robjutil with the +r option for Radiance output now |
| 2443 |
> |
produces normal smoothing unless normals are removed with -n. |
| 2444 |
> |
|
| 2445 |
> |
Added exposure preservation to pcompos when possible (i.e., when |
| 2446 |
> |
there is only one input or inputs agree on exposure). |
| 2447 |
> |
|
| 2448 |
> |
Added -DSHARP_RGB compile-time option to use sharp RGB color space |
| 2449 |
> |
rather than historic default. This can make for more accurate color |
| 2450 |
> |
calculations, but requires that materials be recalibrated. The |
| 2451 |
> |
PRIMARIES= line is also produced on output from rpict or rvu with |
| 2452 |
> |
the correct set of primaries based on how the system was compiled. |
| 2453 |
> |
|
| 2454 |
> |
Added automatic flushing to the output of total, except when the -r |
| 2455 |
> |
(running subtotals) option is used. |
| 2456 |
> |
|
| 2457 |
> |
Improved behavior of little-used -aw option, so that it avoids sea-level |
| 2458 |
> |
rise caused by adding its own estimate back into the ambient level remainder. |
| 2459 |
> |
It ended up being simple enough to derate the final average by the factor |
| 2460 |
> |
corresponding to average surface absorpition, thus removing the average |
| 2461 |
> |
from the final bounce estimate. |
| 2462 |
> |
|
| 2463 |
> |
Introduced ies2rad upgrades by Randolph Fritz. Randolph says it |
| 2464 |
> |
fixes the following problems: |
| 2465 |
> |
|
| 2466 |
> |
1. Generates correct Radiance geometry for spheres in 1995, 2002, |
| 2467 |
> |
and 2019 IES files. |
| 2468 |
> |
|
| 2469 |
> |
2. Generates correct Radiance geometry for vertical cylinders that |
| 2470 |
> |
are taller than they are wide. |
| 2471 |
> |
|
| 2472 |
> |
3. Ignores the file source ("File Generation Type") field in the |
| 2473 |
> |
2019 version of the file, which would otherwise be incorrectly used |
| 2474 |
> |
as an output multiplier. |
| 2475 |
> |
|
| 2476 |
> |
It also offers the following enhancements: |
| 2477 |
> |
|
| 2478 |
> |
1. Shape information is included in the .rad file comments. |
| 2479 |
> |
|
| 2480 |
> |
2. 1995, 2002, and 2019-version luminous opening geometry is |
| 2481 |
> |
accounted for. |
| 2482 |
> |
|
| 2483 |
> |
3. The 2002 and 2019 IES file versions are recognized and |
| 2484 |
> |
processed appropriately. |
| 2485 |
> |
|
| 2486 |
> |
4. I have made an attempt to do something intelligent with less |
| 2487 |
> |
common "luminous opening" shapes in the 1995, 2002, and 2019 versions |
| 2488 |
> |
of the standard, though I have not implemented any support for new |
| 2489 |
> |
geometry; approximations are substituted and warning messages issued. |
| 2490 |
> |
Unfortunately, this code is not tested, since I don't have any IES |
| 2491 |
> |
files that use these shapes. |
| 2492 |
> |
|
| 2493 |
> |
Added support for depth-of-field blurring in vwrays using -pd option. |
| 2494 |
> |
Also, made -c count work with vwrays -i, producing multiple samples |
| 2495 |
> |
per indicated pixel position. At the same time, support for the -pd |
| 2496 |
> |
option was added to rtpict, which calls on vwrays for its samples. |
| 2497 |
> |
|
| 2498 |
> |
Fixed issue with BSDFs that didn't obey reciprocity, where direct |
| 2499 |
> |
sampling wasn't following exactly with indirect sampling. This was |
| 2500 |
> |
discovered and reported by Jon Sargent. |
| 2501 |
> |
|
| 2502 |
> |
Created checkBSDF tool to test XML BSDF reciprocity and perform similar |
| 2503 |
> |
sanity checks. |
| 2504 |
> |
|
| 2505 |
> |
Added -O option to pvalue and pextrem to report watts/sr/m^2 even if |
| 2506 |
> |
picture is XYZE. |
| 2507 |
> |
|
| 2508 |
> |
Made subtle changes to header i/o routines to preserve alignment in |
| 2509 |
> |
binary file formats to enable memory-mapping. Implemented memory-mapped |
| 2510 |
> |
matrix loading in rmtxop for binary double files. |
| 2511 |
> |
|
| 2512 |
> |
Removed ambient value sorting, which was written when ambient caches |
| 2513 |
> |
could overwhelm available memory. This is rarely the case these days, |
| 2514 |
> |
and the added code complexity and updating of cache values with LRU |
| 2515 |
> |
counts dirties pages that would otherwise remain clean, so it was |
| 2516 |
> |
often a loss even when VM was an issue. |
| 2517 |
> |
|
| 2518 |
> |
Added iso2klems script to compute a Klems BSDF based on specular |
| 2519 |
> |
and diffuse measurements as a function of incident angle. |
| 2520 |
> |
|
| 2521 |
> |
Fixed issue with over-counting diffuse component during aBSDF |
| 2522 |
> |
peak extraction. |
| 2523 |
> |
|
| 2524 |
> |
Added dctimestep -x and -y options to specify image dimensions |
| 2525 |
> |
for multiple outputs corresponding to result vectors. |
| 2526 |
> |
|
| 2527 |
> |
Added -P option to rcalc to pass formatted input when cond is <= 0. |
| 2528 |
> |
|
| 2529 |
> |
Created rcrop utility for cropping matrices and pictures more |
| 2530 |
> |
conveniently, correcting view information. Expect it to be handy |
| 2531 |
> |
for extracting rows and columns from matrices, mostly. |
| 2532 |
> |
|
| 2533 |
> |
Changed pcomb so -o option elides original exposure values |
| 2534 |
> |
from indented source headers. |
| 2535 |
> |
|
| 2536 |
> |
Added getinfo -r option, which is similar to -a except it will |
| 2537 |
> |
replace indicated lines with new ones. |
| 2538 |
> |
|
| 2539 |
> |
Slight change to vwrays -d option to not spit out "-ld-", and to |
| 2540 |
> |
produce "-ld+" without requiring input picture as argument. |
| 2541 |
> |
|
| 2542 |
> |
Added automatic overture calculation to rtpict with -n > 1 if |
| 2543 |
> |
ambient cache is on and file is named. If straight image output |
| 2544 |
> |
is requested, we randomize all samples and avoid cache collisions. |
| 2545 |
> |
|
| 2546 |
> |
Added cnt -s option to shuffle output. |
| 2547 |
> |
|
| 2548 |
> |
Fixed issue with divide-by-zero errors in the ambient super-sampling |
| 2549 |
> |
routine discovered by Jon Sargent of Solemma. This affected regions |
| 2550 |
> |
that had zero radiance, such as black backgrounds or unlit areas |
| 2551 |
> |
with -av 0 0 0, when super-sampling was effectively disabled, causing |
| 2552 |
> |
some loss in accuracy of the results. |
| 2553 |
> |
|
| 2554 |
> |
Updated Klems Half- and Quarter-bases to match angles currently used |
| 2555 |
> |
in WINDOW. |
| 2556 |
> |
|
| 2557 |
> |
Eliminated most aiming failures for triangular light sources, at the |
| 2558 |
> |
expense of conservative sampling near the centroid. Thanks to |
| 2559 |
> |
David Geisler-Moroder for his help on this. |
| 2560 |
> |
|
| 2561 |
> |
Increased maximum set size to 8191 to avoid set overflow errors. |
| 2562 |
> |
|
| 2563 |
> |
Added source obstruction test to statistics being kept on which |
| 2564 |
> |
sources were visible in adaptive shadow testing code. Previous |
| 2565 |
> |
behavior was likely over-estimating source contributions. |
| 2566 |
> |
|
| 2567 |
> |
Added diffuse components into maximum directional hemispherical |
| 2568 |
> |
reported by checkBSDF, so comparing to 100% is easier for each |
| 2569 |
> |
component. |
| 2570 |
> |
|
| 2571 |
> |
Fixed incorrect calculations in iso2klems script, thanks to |
| 2572 |
> |
help from Jacob Jonnson. |
| 2573 |
> |
|
| 2574 |
> |
Updated official copyright and license according to new wording |
| 2575 |
> |
provided by Jean Haemmerle at the LBNL Intellectual Property Office. |
| 2576 |
> |
Both were copied verbatim from e-mail I received from Taoning Wang |
| 2577 |
> |
on 8/20/2022. |
| 2578 |
> |
|
| 2579 |
> |
Added -features option to rpict, rtrace, and rcontrib to check |
| 2580 |
> |
which features are present or look for specific feature support. |
| 2581 |
> |
This addition was suggested by Peter Apian-Bennewitz as an easier |
| 2582 |
> |
way to determine which version of Radiance is installed and what |
| 2583 |
> |
it supports, and is timely as we begin our refactoring of the |
| 2584 |
> |
rendering code. There are no current plans to add this to rvu. |
| 2585 |
> |
|
| 2586 |
> |
Added falsecolor -odim, -orct, and -c0 options to overlay grid of |
| 2587 |
> |
values on image. This was requested by Rob Shakespeare. |
| 2588 |
> |
|
| 2589 |
> |
Added -i* and -o* options in rhcopy for reading rays from the |
| 2590 |
> |
standard input and writing rays from holodeck to standard output. |
| 2591 |
> |
This will hopefully be useful in combining rholo with rcontrib. |
| 2592 |
> |
|
| 2593 |
> |
Added further checking for coincident (overlapping) flat surfaces, |
| 2594 |
> |
preferring front sides to back sides in the ray intersection |
| 2595 |
> |
calculation. This only applies to rings and faces, as the other |
| 2596 |
> |
surface types would have required additional calculations to |
| 2597 |
> |
make them work. Material transparency is still the primary |
| 2598 |
> |
consideration, now followed by ray hit side, followed by |
| 2599 |
> |
modifier definition order in the input. |
| 2600 |
> |
|
| 2601 |
> |
Increased octree and object limits to allow scenes with billions |
| 2602 |
> |
of primitives. |
| 2603 |
> |
|
| 2604 |
> |
Made reciprocity averaging default to "off" in bsdf2ttree, as it seems |
| 2605 |
> |
to create more problems than it solves. |
| 2606 |
> |
|
| 2607 |
> |
==================== |
| 2608 |
> |
Version 6.0 |
| 2609 |
> |
|
| 2610 |
> |
Extensive changes to enable spectral rendering, which defaults to "off" |
| 2611 |
> |
to maintain backwards-compatibility with previous versions, with the |
| 2612 |
> |
exception of the ambient file format, which is changed. The MAXCSAMP |
| 2613 |
> |
macro, which defaults to 24, sets the maximum number of spectral samples. |
| 2614 |
> |
The actual number of samples is set by the "-cs" option, which defaults |
| 2615 |
> |
to 3 for rpict, rtrace, and rcontrib. The latter two programs support |
| 2616 |
> |
straight spectral output, but rpict is initially restricted to |
| 2617 |
> |
tristimulus output pictures. New pattern primitives "spectrum", |
| 2618 |
> |
"specfile", and "specfunc" have been added as a means to specify |
| 2619 |
> |
spectral reflectance, emittance, etc. to materials that still have |
| 2620 |
> |
only 3 color channels. Those RGB channels will still affect the |
| 2621 |
> |
spectrum if used. Unfortunately photon-mapping is currently broken when |
| 2622 |
> |
spectral sampling is enabled, but we will fix this as soon as possible. |
| 2623 |
> |
Calculation overhead appears to be approximately 10-15% for RGB |
| 2624 |
> |
renderings compared to version 5.4a. |
| 2625 |
> |
|
| 2626 |
> |
Added spectral rendering to rvu as well, and made -cs and -cw |
| 2627 |
> |
options standard across the rendering library. I also brought |
| 2628 |
> |
mkillum, ranimove, rsensor, and mksource into the fold. These |
| 2629 |
> |
tools were broken in the initial release. (Hopefully, they are |
| 2630 |
> |
working now, but none have been tested as yet.) |
| 2631 |
> |
There was also an indexing bug in the spectral->RGB conversions |
| 2632 |
> |
that made reds into blues and vice versa, which has been fixed. |
| 2633 |
> |
|
| 2634 |
> |
Added i/o for spectral pictures to rmtxop, the first program that can |
| 2635 |
> |
ingest them. (Only rtrace, rcontrib, and rfluxmtx can render them.) |
| 2636 |
> |
New symbolic rmtxop -c options, such as RGB, XYZ, S (for scotopic) |
| 2637 |
> |
and M (for melanopic) make color conversions simpler. Alternatively, |
| 2638 |
> |
a reference matrix or picture may be given and the color space of |
| 2639 |
> |
that file will be used. The -C option takes either a symbolic |
| 2640 |
> |
color space or reference file and is "sticky," so it applies to |
| 2641 |
> |
all subsequent input files that do not have their own -c right ahead |
| 2642 |
> |
of them. |
| 2643 |
> |
|
| 2644 |
> |
Added spectral picture support to rcrop and radcompare. |
| 2645 |
> |
|
| 2646 |
> |
Added new utility, rmtxcomb, which is hard to type and hard to |
| 2647 |
> |
pronounce, and probably equally difficult to use. Sort of a |
| 2648 |
> |
combination of rmtxop and pcomb, it works with all the inputs and |
| 2649 |
> |
outputs that rmtxop handles, but allows for general expressions |
| 2650 |
> |
like those in pcomb for putting matrices together, working on |
| 2651 |
> |
an element at a time. (No resizing of matrices or accessing |
| 2652 |
> |
neighboring elements, as permitted in pcomb.) It saves memory |
| 2653 |
> |
over rmtxop by operating on a row at a time, so can handle |
| 2654 |
> |
input and output matrices with any number of rows. It does |
| 2655 |
> |
provide for a single matrix-multiplication operation at the end, |
| 2656 |
> |
which only requires memory for that final matrix. |
| 2657 |
> |
|
| 2658 |
> |
Added support for filtering hyperspectral images to pfilt. |
| 2659 |
> |
|
| 2660 |
> |
Added support for 1- and 3-component float matrix i/o to |
| 2661 |
> |
pcomb to allow for better interoperability. |
