[ViewVC] Diff of: radiance/ray/doc/notes/ReleaseNotes

Comparing ray/doc/notes/ReleaseNotes (file contents):
Revision 1.286 by greg, Thu Sep 15 22:34:41 2016 UTC vs.
Revision 1.422 by greg, Wed Oct 19 21:25:20 2022 UTC

+discovered by Rob G.
+=================================
-<
+Version 5.1
->
+Version 5.1 (Released 8/17/2017)
+Fixed issue with vchars.mta and symbols.mta not being installed in
+the appropriate metafile library location, with help from Rob G.
+Credit to Sarith Subramaniam for pointing out the problem.
+Made mkillum more tolerant of non-planar polygons in its sampling routines.
-+
-+
+Added "-recover" option to genBSDF to pick up where it left off.
-+
-+
+Fixed genBSDF issue that was created incorrect normalization of
-+
+Klems output.  Thanks to David G-M and Christian Knoflach for
-+
+discovering the error.  Also improved sampling of indirect irradiance
-+
+that showed some slight bias due to poor sample collision avoidance.
-+
-+
+Fixed long-standing issue with -aa 0 neglecting textures in calculating
-+
+surface shading.
-+
-+
+Fixed bug in ranimove introduced during photon map integration.
-+
-+
+Added check for steep sections of BSDF in pabopto2bsdf, creating narrower
-+
+peakes in those places and mitigating some normalization issues.
-+
-+
+Added view360stereo.cal by Mark Stock to handle 360-degree over/under
-+
+stereo views.
-+
-+
+Added MAX2SHADE macro to place limit on number of light sources
-+
+to precheck for obstructions.  (Currently set to 200.)  This
-+
+avoids excessive start-up times for scenes with many light sources.
-+
+Thanks to Axel Jacobs for pointing out the problem.
-+
-+
+Added -v option to obj2mesh to print out mesh statistics.
-+
-+
+Rewrote bsdf2rad from ground up and made it a standard part of build.
-+
-+
+Fixed bug in orientation of Reinhart/Tregenza sample generator in rfluxmtx.
-+
-+
+Added ability to perform shadow-testing through unproxied BSDFs with strong
-+
+through (direct-direct) component.
-+
-+
+Added {+|-}a options to genBSDF and bsdf2ttree for switching off reciprocity
-+
+averaging.
-+
-+
+Added bias to see through BTDFs with a strong "through" component
-+
+rather than scattering view rays.  This is in lieu of peak extraction,
-+
+which looked to be too difficult from an implementation standpoint.
-+
-+
+Added bsdfview tool analogous to objview but for BSDF files (XML and SIR),
-+
+which calls bsdf2rad then rad with a few useful default views.
-+
-+
+=========================
-+
+Version 5.2 (Release October 8, 2018)
-+
-+
+Created psketch program to apply non-photorealistic rendering to selected
-+
+objects, identified by modifier name(s).
-+
-+
+Added '*' and '/' operations to rmtxop for element-wise multiplication and
-+
+division of same-sized matrices.
-+
-+
+Changed falsecolor so "-s" option is adjusted to match legend if one.
-+
-+
+Falsecolor legend changes and improvements by David G-M and Stephen W.
-+
-+
+Fixed bug in peak extraction code that generated
-+
+"Bad call to SDqueryTreProjSA" error, reported by Lars Grobe.
-+
-+
+Increased maximum luminance to 10^7 in pcond to fix issue noticed
-+
+by Axel Jacobs where veiling glare not added for the sun under
-+
+some conditions.
-+
-+
+Increased maximum number of open files in rcontrib to the system upper
-+
+limit of 2048 rather than the default 512 under Windows.
-+
-+
+Added top-level resources directory with files from Rob Guglielmetti.
-+
-+
+Improved accuracy for peaky BSDFs and small light sources.
-+
-+
+Fixed issue with pmapdump noted by Axel Jacobs.
-+
-+
+Improved accuracy of bsdf2ttree when converting scattering interpolation
-+
+representatons with strong peaks.
-+
-+
+Tweaked peak-extraction code to work more reliably.
-+
-+
+Georg Mischler updated SCons build system.
-+
-+
+Rob Guglielmetti and Alex Swindler updated CMake build system.
-+
-+
+Modified pcomb so the first view seen in the inputs is written into header.
-+
-+
+Wrote rtpict script to run rtrace in parallel mode and simulate rpict with
-+
+-n option.
-+
-+
+Added ability to move forwards/backwards specified distance in rvu "origin"
-+
+command.  Feature requested by John Mardaljevic, who essentially owns this
-+
+command, now.
-+
-+
+Reduced bias in ambient super-sampling method.
-+
-+
+Fixed bugs associated with zero transmission in chromatic tensor trees.
-+
+Thanks to Lars Grobe for pointing out issues.
-+
-+
+Added RAYPATH searching for -f options to genrev, gensurf, genworm,
-+
+bsdf2klems, bsdf2ttree, and pcomb.  This makes behavior consistent
-+
+with rcalc, calc, and rendering tools.
-+
-+
+Worked with Randolph Fritz to fix some issues with ies2rad and newer
-+
+IESNA63 standards.
-+
-+
+Resurrected original bsdf2rad test program, renaming it bsdf2rado. Still an
-+
+optional build in src/cv/.
-+
-+
+Fixed bug in rcontrib with virtual sources, where pretest was adding
-+
+to modifier accumulation buffers.  Reported by Mostapha.
-+
-+
+Added an "aBSDF" material type that explicitly checks for peak extraction.
-+
+Its arguments are the same as the original "BSDF" type, but without the
-+
+thickness parameter, as proxy geometry is not supported by this new type.
-+
+The old "BSDF" type no longer does peak extraction under any circumstances,
-+
+since this behavior is superfluous for proxied geometry.
-+
-+
+Added -r option to bsdf2rad (and bsdfview) to fix BSDF min and max range
-+
+for comparing BSDFs.
-+
-+
+Fixed issue with pfilt -m option and uneven image size changes pointed
-+
+out by Rob Shakespeare.
-+
-+
+Updates to evalglare and gendaylit from Jan Wienold, including new
-+
+colored sky option.
-+
-+
+=========================
-+
+Version 5.3 (Released September 1, 2020)
-+
-+
+Created radcompare program to compare Radiance tool output to reference outputs
-+
+during unit-testing.
-+
-+
+Fixed issue reading very large files (> 2 GBytes) in rcollate.
-+
-+
+Made picking function in rvu ignore transparent and void surfaces.
-+
-+
+Added -orRxX options to rtrace to enable output of mirrored and unmirrored
-+
+contributions and distances to enable new types of reprojections.  This also
-+
+cleaned up and unified handling of effective ray lengths throughout code.
-+
-+
+Bug fixes from Jan Wienold for evalglare.
-+
-+
+Changed indexed (numbered) output from dctimestep to start from 0 rather
-+
+than 1, to make it more consistent with expected input naming.
-+
-+
+Increased default sampling in bsdf2klems (-n option) to 1024.
-+
-+
+Fixed an issue noticed by David G-M that was causing genBSDF to bias
-+
+isotropic tensor tree samples resulting in subsequent failure of
-+
+peak extraction with "aBSDF" type.
-+
-+
+Introduced max() and min() functions to .cal library.
-+
-+
+Added random incident patch sampling to bsdf2klems to improve accuracy
-+
+with scattering interpolation representation input (e.g., from
-+
+pabopto2bsdf).  The other input types already sampled incident patch area.
-+
-+
+Added gendaymtx -A option to compute average sky over all the input
-+
+time steps.
-+
-+
+Added ability to output color image from rtrace with any of -ovrx options.
-+
+Also fixed inconsistency of -oN output when ray casting versus full trace.
-+
+Before, it would flip normal to front side unless ray casting.  Now, -oN
-+
+always reports the unflipped normal.
-+
-+
+Changed rlam behavior so -iaN reads N lines from a stream rather than N
-+
+characters.  This seems more useful, since -ibN is somewhat redundant with
-+
+the old behavior.
-+
-+
+Created rsplit program as compliment to rlam and to handle more complex
-+
+rtrace output into separate files or streams.
-+
-+
+Improved getinfo so that it can also hop over resolution string with -c
-+
+and header elide mode.  Use +d to include resolution string in output,
-+
+and -d to elide with - and -c options.
-+
-+
+Made pvalue -u option mean "uncompressed" with -r.  Also, allow skipping
-+
+bytes on standard input.
-+
-+
+Created rcode_depth tool to convert to and from a 16-bit/pixel portable
-+
+depth image encoding that uses a mix of linear and reciprocal distance
-+
+with explicit representations of 0 and infinity.  Code for loading these
-+
+depth maps is in src/common/depthcodec.{h,c}.
-+
-+
+Created rcode_norm tool to convert to and from 32-bit/pixel portable
-+
+surface normal representation, matching the one in src/common/dircode.c.
-+
+Code for loading normal maps is in src/common/normcodec.{h,c}.
-+
-+
+Created rcode_ident tool to create indexed identifier files.
-+
+Code for loading these files is in src/common/idmap.{h,c}.
-+
-+
+Added -o* option to rtpict to produce layered images that handle most
-+
+output types from rtrace (colors, surface normals, distances, IDs).
-+
-+
+Created rcode2bmp script to create images from new rcode_* output maps.
-+
-+
+Improved efficiency of rmtxop in cases where matrix multiplication is
-+
+faster evaluated right-to-left, as when the final component is a
-+
+column vector.  Also added ability to apply trailing unary operators
-+
+(-t, and -s or -c) to resulting matrix.
-+
-+
+Added new depth, normal, and ID file types to radcompare.
-+
-+
+Added BigEndian= header line for automatic byte-swapping in rmtxop
-+
+and radcompare.
-+
-+
+Added new "turbo" palette to falsecolor (thanks to Taoning).
-+
-+
+Nathaniel Jones created the "dcglare" program for annual glare
-+
+simulations when the sun and sky are visible through the window.
-+
+Tutorial is posted at
-+
+"https://github.com/nljones/Accelerad/wiki/The-Imageless-Method-for-Spatial-and-Annual-Glare-Analysis".
-+
-+
+Added support for loading RGBE images into matrices in dctimestep.
-+
-+
+Added -y option to gensky and gendaylit to support more accurate Michalsky
-+
+solar position calculation.
-+
-+
+Changed rsplit, so specifying a space as the separator parses words
-+
+between whitespace.
-+
-+
+Added ability of vwrays, pinterp, and pmblur2 to read encoded depth files.
-+
-+
+Added -o RxCxR1xC1 facility to perform blocking in rcollate.
-+
-+
+Made it so number of segments in genworm, genrev, and gensurf can be
-+
+given as expressions of previously defined variables, etc.
-+
-+
+Added -D and -n option to gendaymtx to output sun description and skip
-+
+matrix output on request.  A -M option was also added to output solar
-+
+modifiers for rcontrib.  Support also added for leap days in WEA input.
-+
+Enhancements sponsored by Ladybug Tools.
-+
-+
+Updated eplus_uvf to work with IDF version 9.x, checking version number.
-+
-+
+Fix to glarendx issues with dgi calculation.
-+
-+
+Made it so rmtxop and dctimestep undo any exposure applied to Radiance
-+
+pictures they may load.
-+
-+
+Added robjutil utility to manipulate Wavefront .OBJ files.
-+
-+
+Fixed a crash related to rtrace -om or -oM with mesh instances containing
-+
+materials.
-+
-+
+Improved rtrace flushing function to handle any value for -x without
-+
+deadlock on controlling process.
-+
-+
+Eliminated unnecessary start-up procedures for rtrace when only ray-casting
-+
+is needed (i.e., no tracing or value output).
-+
-+
+Improved isotropic sampling method in bsdf2ttree using "zipper" approach
-+
+applied in genBSDF.
-+
-+
+Added limit to memory used by high-resolution tensor tree BSDFs for
-+
+cumulative cache during MC sampling (rendering).  Limit set to 250MBytes
-+
+per BSDF for standard architectures.
-+
-+
+Added -n and -s options to bsdf2ttree to provide some user control
-+
+over super-sampling.
-+
-+
+Improved surface normal codec used by ambient file to store orthonormal
-+
+directions exactly.
-+
-+
+Improved peak extraction method, which was undervaluing transmission
-+
+in many cases.
-+
-+
+New version of evalglare from Jan Wienold.
-+
-+
+Added -u option to gendaymtx to elide data columns (time steps) when
-+
+the sun is not visible above the horizon.
-+
-+
+=========================
-+
+Version 5.4
-+
-+
+Added rcollate -c option to force operation to continue even if it
-+
+seems unnecessary.  Made tool more robust.
-+
-+
+Added -t option to rcontrib (and rfluxmtx) to report progress after the
-+
+given number of seconds.
-+
-+
+Added "test" target to makeall to run unit tests.
-+
-+
+Modified bsdf2ttree to allow different parameters per input SIR file.
-+
-+
+Fixed issues with very large matrix files (> 2GB) in dctimestep, rmtxop,
-+
+and rcollate.
-+
-+
+Added -rf and -rb options to rmtxop to load front or back reflectance
-+
+matrix data from XML file rather than transmission.  (Lars Grobe suggested.)
-+
-+
+Improved behavior for coincident surfaces with different materials.
-+
+Rather than returning one surface or the other based on floating-point
-+
+vagaries, opaque materials are now preferred over transparent ones.
-+
+If the materials are both transparent or both opaque, then whichever
-+
+surface appeared later in the scene description will be selected.
-+
+This came of a request for consistent behavior with legal CAD output
-+
+from Peter Apian-Bennewitz.
-+
-+
+Added explicit tests for on-edge intersections with polygons.  This should
-+
+eliminate stray rays and tiny light leaks that often appear even in
-+
+well-constructed geometry.
-+
-+
+Added "-s up" option to pabopto2bsdf to allow for 180 degree symmetry,
-+
+meaning that data repeats after 180 degree rotation (as distinguished
-+
+from "-s bilateral" whose data is mirrored about a vertical plane).
-+
+Thanks to Helen Rose Wilson for the suggestion and informing me that
-+
+such a thing exists.
-+
-+
+Removed upper limit on number of modifiers in rcontrib.
-+
-+
+Put cap on maximum ambient gradient to avoid over-extrapolation of
-+
+poorly computed irradiance cache values.
-+
-+
+Added robjutil +T option to triangulate all faces in .OBJ description.
-+
-+
+Altered BSDF library to have both front and back diffuse transmittance
-+
+values, which can be different.  This was necessary to avoid issues
-+
+caused by measurement and modeling discrepancies.
-+
-+
+Added pabopto2bsdf -g option to cull near-grazing scattering to avoid
-+
+issues with noise and negative values.
-+
-+
+Increased default dynamic range from 32 to 100 in pcond and normtiff.
-+
-+
+Added -o and -n options to genbox to create .OBJ output and segment
-+
+edges and corners for transparent materials.  Also added -s option
-+
+to control smoothing for .OBJ and Radiance with segmented rounding.
-+
-+
+Made it so robjutil with the +r option for Radiance output now
-+
+produces normal smoothing unless normals are removed with -n.
-+
-+
+Added exposure preservation to pcompos when possible (i.e., when
-+
+there is only one input or inputs agree on exposure).
-+
-+
+Added -DSHARP_RGB compile-time option to use sharp RGB color space
-+
+rather than historic default.  This can make for more accurate color
-+
+calculations, but requires that materials be recalibrated.  The
-+
+PRIMARIES= line is also produced on output from rpict or rvu with
-+
+the correct set of primaries based on how the system was compiled.
-+
-+
+Added automatic flushing to the output of total, except when the -r
-+
+(running subtotals) option is used.
-+
-+
+Improved behavior of little-used -aw option, so that it avoids sea-level
-+
+rise caused by adding its own estimate back into the ambient level remainder.
-+
+It ended up being simple enough to derate the final average by the factor
-+
+corresponding to average surface absorpition, thus removing the average
-+
+from the final bounce estimate.
-+
-+
+Introduced ies2rad upgrades by Randolph Fritz.  Randolph says it
-+
+fixes the following problems:
-+
-+
+. Generates correct Radiance geometry for spheres in 1995, 2002,
-+
+        and 2019 IES files.
-+
-+
+. Generates correct Radiance geometry for vertical cylinders that
-+
+        are taller than they are wide.
-+
-+
+. Ignores the file source ("File Generation Type") field in the
-+
+version of the file, which would otherwise be incorrectly used
-+
+        as an output multiplier.
-+
-+
+    It also offers the following enhancements:
-+
-+
+. Shape information is included in the .rad file comments.
-+
-+
+. 1995, 2002, and 2019-version luminous opening geometry is
-+
+        accounted for.
-+
-+
+. The 2002 and 2019 IES file versions are recognized and
-+
+        processed appropriately.
-+
-+
+. I have made an attempt to do something intelligent with less
-+
+        common "luminous opening" shapes in the 1995, 2002, and 2019 versions
-+
+        of the standard, though I have not implemented any support for new
-+
+        geometry; approximations are substituted and warning messages issued.
-+
+        Unfortunately, this code is not tested, since I don't have any IES
-+
+        files that use these shapes.
-+
-+
+Added support for depth-of-field blurring in vwrays using -pd option.
-+
+Also, made -c count work with vwrays -i, producing multiple samples
-+
+per indicated pixel position.  At the same time, support for the -pd
-+
+option was added to rtpict, which calls on vwrays for its samples.
-+
-+
+Fixed issue with BSDFs that didn't obey reciprocity, where direct
-+
+sampling wasn't following exactly with indirect sampling.  This was
-+
+discovered and reported by Jon Sargent.
-+
-+
+Created checkBSDF tool to test XML BSDF reciprocity and perform similar
-+
+sanity checks.
-+
-+
+Added -O option to pvalue and pextrem to report watts/sr/m^2 even if
-+
+picture is XYZE.
-+
-+
+Made subtle changes to header i/o routines to preserve alignment in
-+
+binary file formats to enable memory-mapping.  Implemented memory-mapped
-+
+matrix loading in rmtxop for binary double files.
-+
-+
+Removed ambient value sorting, which was written when ambient caches
-+
+could overwhelm available memory.  This is rarely the case these days,
-+
+and the added code complexity and updating of cache values with LRU
-+
+counts dirties pages that would otherwise remain clean, so it was
-+
+often a loss even when VM was an issue.
-+
-+
+Added iso2klems script to compute a Klems BSDF based on specular
-+
+and diffuse measurements as a function of incident angle.
-+
-+
+Fixed issue with over-counting diffuse component during aBSDF
-+
+peak extraction.
-+
-+
+Added dctimestep -x and -y options to specify image dimensions
-+
+for multiple outputs corresponding to result vectors.
-+
-+
+Added -P option to rcalc to pass formatted input when cond is <= 0.
-+
-+
+Created rcrop utility for cropping matrices and pictures more
-+
+conveniently, correcting view information.  Expect it to be handy
-+
+for extracting rows and columns from matrices, mostly.
-+
-+
+Changed pcomb so -o option elides original exposure values
-+
+from indented source headers.
-+
-+
+Added getinfo -r option, which is similar to -a except it will
-+
+replace indicated lines with new ones.
-+
-+
+Slight change to vwrays -d option to not spit out "-ld-", and to
-+
+produce "-ld+" without requiring input picture as argument.
-+
-+
+Added automatic overture calculation to rtpict with -n > 1 if
-+
+ambient cache is on and file is named.  If straight image output
-+
+is requested, we randomize all samples and avoid cache collisions.
-+
-+
+Added cnt -s option to shuffle output.
-+
-+
+Fixed issue with divide-by-zero errors in the ambient super-sampling
-+
+routine discovered by Jon Sargent of Solemma.  This affected regions
-+
+that had zero radiance, such as black backgrounds or unlit areas
-+
+with -av 0 0 0, when super-sampling was effectively disabled, causing
-+
+some loss in accuracy of the results.
-+
-+
+Updated Klems Half- and Quarter-bases to match angles currently used
-+
+in WINDOW.
-+
-+
+Eliminated most aiming failures for triangular light sources, at the
-+
+expense of conservative sampling near the centroid.  Thanks to
-+
+David Geisler-Moroder for his help on this.
-+
-+
+Increased maximum set size to 8191 to avoid set overflow errors.
-+
-+
+Added source obstruction test to statistics being kept on which
-+
+sources were visible in adaptive shadow testing code.  Previous
-+
+behavior was likely over-estimating source contributions.
-+
-+
+Added diffuse components into maximum directional hemispherical
-+
+reported by checkBSDF, so comparing to 100% is easier for each
-+
+component.
-+
-+
+Fixed incorrect calculations in iso2klems script, thanks to
-+
+help from Jacob Jonnson.
-+
-+
+Updated official copyright and license according to new wording
-+
+provided by Jean Haemmerle at the LBNL Intellectual Property Office.
-+
+Both were copied verbatim from e-mail I received from Taoning Wang
-+
+on 8/20/2022.
-+
-+
+Added -features option to rpict, rtrace, and rcontrib to check
-+
+which features are present or look for specific feature support.
-+
+This addition was suggested by Peter Apian-Bennewitz as an easier
-+
+way to determine which version of Radiance is installed and what
-+
+it supports, and is timely as we begin our refactoring of the
-+
+rendering code.  There are no current plans to add this to rvu.

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing ray/doc/notes/ReleaseNotes (file contents): Revision 1.286 by greg, Thu Sep 15 22:34:41 2016 UTC vs. Revision 1.422 by greg, Wed Oct 19 21:25:20 2022 UTC

Diff Legend

Comparing ray/doc/notes/ReleaseNotes (file contents):
Revision 1.286 by greg, Thu Sep 15 22:34:41 2016 UTC vs.
Revision 1.422 by greg, Wed Oct 19 21:25:20 2022 UTC