[ViewVC] Diff of: radiance/ray/doc/notes/ReleaseNotes

Comparing ray/doc/notes/ReleaseNotes (file contents):
Revision 1.2 by greg, Tue Mar 18 04:45:28 2003 UTC vs.
Revision 1.219 by greg, Mon Aug 5 22:56:50 2013 UTC

+by Erich Phillips.
+==============================
-<
+Version 3.5 (Released 3/14/03)
->
+Version 3.5 (Released 3/21/03)
+Fixed bug in replmarks pointed out by Georg Mischler, which caused
+garbage to be output under specific conditions (unscaled, unrotated
+This required a little reprogramming in for couple
+of recursive routines using sets to avoid overrunning
+the stack limit.
-+
-+
+==============================
-+
+Version 3.6 (Released 10/21/04)
-+
-+
+Modified 4-byte RGBE encoding routine to avoid problems
-+
+when one or two primary values is negative and the other(s)
-+
+positive.  This used to generate some strange color values.
-+
-+
+Added -oc option to rtrace to output local (u,v) coordinates.
-+
-+
+Fixed bugs in local uv and j unit vector variables in src/rt/func.c.
-+
-+
+Added warning message to OpenGL rendering routines about new
-+
+mesh primitive, which we cannot currently render.
-+
-+
+Added -if, -id, -of, and -od options to rcalc to provide for
-+
+binary float and double i/o.
-+
-+
+****************** COMPATIBILITY CHANGE ***********************
-+
+Changed holodeck format to used off_t instead of long for beam
-+
+positions, which allows holodecks to grow to system file size limit.
-+
-+
+Fixed wrapping long in source hit test code, which would cause
-+
+odd horizontal lines in some very long renderings.
-+
-+
+Added -f and -w options to ra_tiff to create IEEE float and 16-bit/primary
-+
+TIFF output, respectively.  These formats are also understood on reverse
-+
+conversion.  (16-bit/primary has been understood for some time, but not
-+
+IEEE float.)
-+
-+
+Added -N option to rad to start multiple rendering processes in
-+
+parallel.
-+
-+
+Fixed bug where mesh instances were not being freed, so subsequent calls
-+
+in programs like ranimove would refer to bogus data.
-+
-+
+Added support in normtiff for floating-point and 16-bit/sample TIFF input
-+
+files.
-+
-+
+Changed marksources() routine (src/rt/source.c) to check all
-+
+primitives in the modifier chain for emitting types, not only
-+
+the first.  This permits sources to be described with intervening
-+
+modifiers before the light/illum/glow primitive and allows aliases
-+
+as well.
-+
-+
+Fixed bug in xform where it was neglecting to add transform arguments
-+
+to new mesh primitive.
-+
-+
+Added -dF and -dD options to pvalue for byte-swapped floats and
-+
+doubles, respectively.
-+
-+
+Changed meta2tga to output correct colors.
-+
-+
+Changed local coordinate index from 32-bits to 16-bits, which requires
-+
+that Radiance mesh files be recompiled.  (Later decided against this
-+
+change, as it caused problems with some models.)
-+
-+
+Changed integer tone-mapping routines to better deal with images
-+
+containing large, constant regions.
-+
-+
+Improved interaction with rholo -o ogl driver under OS X, which was
-+
+returning bad values from the depth buffer.
-+
-+
+Minor bug fix in ranimove where it was restarting processes when it
-+
+didn't need to.
-+
-+
+Increased accuracy of default ambient parameters in rpict, rview, and
-+
+rtrace.  In rad program, doubled -ar value, -ad value, and -as value,
-+
+and decreased -aa value a bit.  Also adjusted -lr upwards and -lw
-+
+downwards.  I should have done these things long ago, as processors
-+
+have been getting faster and faster over the years.
-+
-+
+Fixed bug discovered by Marcus Jacobs where oconv was dumping core
-+
+when it was given too many modifiers.
-+
-+
+Fixed problem with rpict where it was drawing illum sources badly
-+
+even when they weren't all that small in the view.
-+
-+
+Added in(i) function to rcalc for more flexible channel evaluation.
-+
-+
+Replaced all calls to vfork() with regular fork() calls.
-+
-+
+Fixed bug in glarendx for dgr calculation with sources behind view.
-+
-+
+Added -p option to histo to print percentages/percentiles r.t. counts.
-+
-+
+Added a source occluder cache to accelerate shadow testing.  This
-+
+can save up to 50% of the calculation time in scenes with many
-+
+light sources, especially ones containing large occluders.  This
-+
+optimization may be tuned or switched off with the -DSHADCACHE=N
-+
+compile switch, where N is the resolution of the shadow cache, or
-+
+to disable it.  Since this is purely a time vs. memory trade-off,
-+
+I decided not to make it a new command-line option.  (We already
-+
+have plenty.)
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed the following command names to avoid conflicts:
-+
+        rview -> rvu (with symbolic link back to rview)
-+
+        calc -> icalc
-+
+        lam -> rlam
-+
+        gencat -> gencatenary
-+
-+
+Improved -f option of normpat, which caused odd color changes before.
-+
-+
+Created pgblur script which does fast Gaussian blur of image without changing
-+
+its dimensions.  This is very useful in certain types of image processing
-+
+calculations, such as finding or removing low frequencies.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed little-used objpict script so that it takes scene files rather than
-+
+rpict options on the command line, and puts everything into the right
-+
+coordinate position automatically rather than requiring the user to do it.
-+
-+
+Added -I option to replmarks for mesh instancing.
-+
-+
+Made similar change for virtual sources to allow modifiers and aliases
-+
+on the mirror and prism types to work properly.
-+
-+
+Rob Guglielmetti added -lw and -lh options to falsecolor to control the
-+
+legend dimensions.  Made it so -lw 0 and/or -lh 0 turns legend off.
-+
-+
+Made it so pcompos will read everything from a stream even if it doesn't
-+
+need it, so input commands will not receive a hangup signal.
-+
-+
+Wrote ra_bmp program to convert to and from Windows BMP files (finally).
-+
+It's the most horrible image format I've ever seen, and I've seen a lot.
-+
-+
+Increased -aa default value for all renderers (and also -ad and -as in
-+
+rview) at Schorsch's suggestion.  I think this undid my earlier decrease
-+
+of -aa last time, which I guess was ill-considered.
-+
-+
+Modified oconv to keep subdividing the octree if there are too many
-+
+objects in a voxel even when the -r resolution limit has been
-+
+reached.  This was not done before due to problems with recursion,
-+
+and still, it will only continue to 256 times the original -r limit.
-+
+If that isn't enough, then there's probably no hope, anyway.
-+
-+
+Added -l option to obj2mesh to search for material files in library
-+
+locations.
-+
-+
+Increased polygon vertex limit to 512 in obj2mesh and obj2rad and added
-+
+warning if this limit is exceeded.
-+
-+
+Added tone-mapping and monitor primary options to ra_bmp.  This gives
-+
+new functionality similar to normtiff and ximage.  It would be nice to
-+
+add this feature to the other ra_* programs as well...  someday.
-+
-+
+Fixed long-standing bug in reported pixel ordering out of certain
-+
+protate commands.
-+
-+
+Added -p option to rcalc for "passive mode" that transmits
-+
+unrecognized input -- useful for substituting data in the
-+
+middle of a stream.
-+
-+
+Fixed a very obscure bug in rpict that caused a dark horizontal
-+
+line in certain cylindrical projections due to improper drawing
-+
+of the sky dome source in rt/srcdraw.c.
-+
-+
+Fixed problems with effective ray lengths computed for dielectric
-+
+and BRTDfunc materials.  This was most evident in breakup of holodeck
-+
+views when VDISTANCE=True.
-+
-+
+Fixed rad so that 'scene' variable may consist only of inline commands.
-+
-+
+Fixed bug introduced in shadow caching routines where sources in the
-+
+middle of spheres were not illuminating properly.  Thanks to Guilio
-+
+Antonutto for spotting this problem.
-+
-+
+Modified gensky behavior so if time is given with standard time zone
-+
+designation, any -m option is ignored.
-+
-+
+Added -n option to mkillum for (shared memory) parallel processing.
-+
-+
+Fixed a long-standing bug in parallel processing code that only
-+
+seemed to manifest with the new mkillum -n option, where rtrace
-+
+would deadlock upon termination.  The reason it never showed up
-+
+before is because I always closed processes in the reverse order
-+
+of opening them in other programs.  I went through and found similar
-+
+(potential) bugs in the rview device subprocess code and util/netproc.c.
-+
-+
+Corrected the normalization of the Gaussian reflectance model.  This will
-+
+cause an increase in specularity for low-lying light sources.
-+
+Thanks to Don Walters of Boeing and Arne Duer of the Univ. of Innsbruck
-+
+for pointing out this error.  The square root used for the two cosines
-+
+in the denominator of the normalization factor should not be present.
-+
+This was a serious mistake I made in the original model, which went
-+
+undiscovered (at least to my knowledge) for over a decade.  I think
-+
+Bruce Walter of Cornell may have known about it, but I never heard
-+
+the details of his discovery.
-+
-+
+Enabled the -p option for primary conversion without tone-mapping
-+
+in ra_bmp.  Also provides for XYZE input conversion to RGB.
-+
-+
+Fixed what I consider a bug in pvalue -o when taking XYZE files on input,
-+
+where it was inappropriately undoing the exposure value so that it always
-+
+reported radiance rather than XYZ values with Y in cd/m^2.
-+
-+
+Made it so ra_bmp only produces run-length encoded 8-bit output for
-+
+grayscale images that are tone-mapped.  This minimizes circumstances
-+
+under which output scanline order is reversed.
-+
-+
+Fixed bug in rcalc where it sometimes wasn't parsing the input format
-+
+correctly.
-+
-+
+=====================
-+
+Version 3.7 (Released 7/25/05)
-+
-+
+Fixed bug in source occluder cache which caused consistency error
-+
+for distant sources and mist materials.  (Thanks to Mark Stock for
-+
+finding the problem.)
-+
-+
+Fixed serious bug in source drawing routines for rpict, where the edges
-+
+of light sources were appearing through obstructions.  (Thanks to Veronica
-+
+Sundstedt for pointing this out.)
-+
-+
+(The above were included in the 3.6.1 patch release.)
-+
-+
+Changed default temporary directory from /usr/tmp, which doesn't exist
-+
+on a lot of systems these days, to /tmp.
-+
-+
+Eliminated many unused files and programs from the distribution, including
-+
+the following programs that were being built but no longer used:
-+
+        oki20   - printer driver for OkiMate 20 printer (B&W)
-+
+        oki20c  - printer driver for OkiMate 20 color printer
-+
+        pcwarp  - intended as more general substitute for macbetcal,
-+
+                        but never quite worked
-+
+        ra_avs  - convert to & from AVS image format
-+
+        ra_bn   - convert to & from Barneyscann format
-+
+        ra_pr   - convert to & from 8-bit Sun rasterfile format
-+
+        ra_pr24 - convert to & from 24-bit Sun rasterfile format
-+
+        thf2rad - convert GDS "things file" to Radiance scene format
-+
+If anyone is still wanting any of the above programs, let us know and we'll
-+
+reinstate it.
-+
-+
+Fixed bug in pcond's acuity simulation for small view angles (less than
-+
+degrees horizontally or vertically).  Thanks to James Lee for figuring
-+
+this out.
-+
-+
+Added script to convert to/from ICT's Poskanzer Float Map, which I don't
-+
+care to support officially due to its machine-dependent byte order.
-+
-+
+Fixed bug that caused incorrect reporting of non-surface in set when
-+
+mixing meshes and instances.  (Thanks to Jack de Valpine for discovery.)
-+
-+
+Fixed inaccuracy in calculation of diffuse transmission in the presence
-+
+of pure specular (Fresnel reflection) using "trans" material.  Thanks
-+
+to Christoph Reinhart for pointing out the error.
-+
-+
+Made internal change to tone-mapping library to use structure pointer
-+
+rather than stack, making code re-entrant and more up to modern standards.
-+
-+
+Added -pd option to handle depth-of-field blur in rpict.  This requires
-+
+that the view directon (-vd option) include focal distance information,
-+
+which is now preserved by the various view file routines, and reported
-+
+by the vwright command.
-+
-+
+Added DBLUR variable to ranimate and pmdblur script to handle simultaneous
-+
+motion and depth-of-field blurring.  Thanks to Visarc for funding this work.
-+
-+
+Added setting of focus distance in rvu ("focus" command) and rholo
-+
+('f'/"frame" command).
-+
-+
+Changed default remote shell in ranimate to "ssh" rather than "rsh",
-+
+which has been abandoned on most Unix systems due to security issues.
-+
-+
+Fixed behavior of source primitive using illum with no alternate
-+
+material.  These now become transparent so one can see the sky or
-+
+light-probe background for use in image-based lighting.  Previously,
-+
+the user needed to specify the background glow as the alternate
-+
+material for a distant illum source to behave properly.  (This still
-+
+works.)
-+
-+
+Fixed some minor problems and inconsistencies with 16-bit/channel
-+
+TIFF i/o in ra_tiff.
-+
-+
+Created mksource program to generate distant sources for improved
-+
+image-based lighting with light probes.
-+
-+
+Changed ambient calculation so that -ad will not limit recursion
-+
+depth, and a minimum of 27 samples will be sent out for each stored
-+
+ambient value, or 3 samples if -aa is 0 (caching off).
-+
-+
+Added -oM option to rtrace to report material (rather than modifier)
-+
+for cases where actual material is aliased or further up modifier chain.
-+
-+
+Rearranged the way ray contributions are computed so that it might be
-+
+possible to use rtrace to derive daylight coefficients and optical
-+
+transfer functions.  The new -oTW option of rtrace produces color
-+
+contribution weights for each ray, which combined with the -ti (or -tI)
-+
+option permits the contribution of selected surfaces or sources to
-+
+be determined.  Using the -oTW option, one should also specify
-+
+options "-dt 0 -aa 0 -as 0" for optimal results.  In particular,
-+
+one cannot expect reasonable tallies with -ab >= 1 and irradiance
-+
+caching on (-aa > 0).
-+
-+
+The same code modifications included a change to the indirect computation
-+
+with caching switched off (-aa 0).  Whereas before, the number of secondary
-+
+rays after the first bounce were half of the previous generation, they are
-+
+now determined by the surface reflectance, making for a better and faster
-+
+calculation.  It should now be possible to compute many bounces with -aa 0,
-+
+which used to be prohibitively expensive.
-+
-+
+Added -T option to xshowtrace to trace rays to light sources.
-+
-+
+Added meta2bmp program to produce BMP files from metafile graphics.
-+
-+
+Added cct_x(t) and cct_y(t) to src/cal/cal/blackbody.cal to interpolate
-+
+CIE chromaticities for particular black-body temperatures.
-+
-+
+Increased maximum number of input pictures in pcomb and pcompos to 512.
-+
-+
+Created rtcontrib program for computing ray contribution coefficients.
-+
+This tool may be used to do standard optical ray tracing or daylight
-+
+coefficient calculations for annual simulations, among other uses.
-+
-+
+Added tilde ('~') output option as part of the -o* specification of
-+
+rtrace.  This permits ray trees to be parsed more easily in binary
-+
+output mode, as needed by rtcontrib.
-+
-+
+Implemented Russian roulette ray termination with -lr <= 0.
-+
+Made -lr -10 the default in rtcontrib.
-+
-+
+Made rtcontrib -f option search RAYPATH directories.
-+
-+
+Made it so -o option of rtcontrib can pipe -o output to a command.
-+
-+
+Added -if and -of options to total for binary i/o (following rcalc mold).
-+
-+
+Switched default options in rtrace to use Russian roulette.  (Rpict and rvu
-+
+still use biased ray termination.)
-+
-+
+Added rtcontrib -r option to recover partial output.
-+
-+
+Added -u rendering option for pure Monte Carlo sampling.
-+
+(Got rid of -DMC compile option, which this makes superfluous.)
-+
-+
+Changed -t option of rlam to accept strings as well as single characters.
-+
-+
+Fixed bug in rcalc with -l option where it would sometimes go into an
-+
+infinite loop.
-+
-+
+Fixed truly ancient bug in bounding box computation for cones, which
-+
+could (and did) cause missing segments.
-+
-+
+Added -z option to normtiff to output LZW-compressed files.
-+
-+
+Last change to total causes it to produce results when it sees an empty
-+
+line on the input.  This was not intentional, but I decided I like this
-+
+behavior so I documented it rather than changing it.
-+
-+
+=====================
-+
+Version 3.8 (Released 10/17/06)
-+
-+
+Fixed Russian roulette ray termination, which was doing the opposite of
-+
+what it should have been doing, resulting in overestimated values below
-+
+minimum ray sampling weight (serious).
-+
-+
+Changed mksource to use 98th percentile (rather than 99th) for threshold.
-+
-+
+(Above changes included in 3.7.1 patch release.)
-+
-+
+Eliminated writing of EXPOSURE= line in ra_tiff -r when source TIFF
-+
+does not have STONITS set.
-+
-+
+Fixed bug in ambient calculation that caused black values for multiple
-+
+bounces in some scenes.  Thanks to Mark Stock for creating and sharing
-+
+the sophisticated test scene that demonstrated this problem.
-+
-+
+Fixed bug in antimatter using Russian Roulette sampling.
-+
-+
+(Above changes included in 3.7.2 patch release 22 Aug 2005.)
-+
-+
+Created fieldcomb script to combine alternate fields in a rendering
-+
+sequence.  (Development generously sponsored by Iebele Abel.)
-+
-+
+Added missing preload of mesh objects for more efficient memory use
-+
+during parallel rendering -- this was a serious oversight.
-+
-+
+Created ran2tiff program to automate exposure setting of animation
-+
+sequences using a moving histogram in combination with pcond, and
-+
+converting frames to TIFF.
-+
-+
+Eliminated SPEED macro from makeall and source tree.
-+
-+
+Added -pj option to vwrays to allow jittering of sample locations.
-+
-+
+Fixed bug in rtcontrib where it occasionally missed writing the
-+
+final bin file.  (Pretty serious, actually.)
-+
-+
+Added -Dfseeko=fseek to MACH= line for linux, as fseeko(3) seems to be
-+
+broken in current versions of Linux.  (Need to remove this later.)
-+
-+
+Rearranged struct's for better efficiency on 64-bit architectures.
-+
-+
+Added -i option to rlam so it works with binary input formats.
-+
-+
+Added rtcontrib -bn option to specify number of bins and fixed bug
-+
+in recovery of files containing multiple values per record.
-+
-+
+Added rtcontrib -fo option to write over existing files, which it now
-+
+refuses to do without this option.
-+
-+
+Made rtcontrib flush output when handed a zero-length ray vector,
-+
+to match behavior of rtrace.
-+
-+
+Improved color scale for falsecolor output.
-+
-+
+Added threshold test for Fresnel approximation to prevent its use
-+
+on smooth surfaces with unrealistically low specularities (less than 1.8%).
-+
+Water has a specular reflectance of 2.1% at room temperture.
-+
-+
+Removed NICE macro settings in rpict and rtrace, which was slowing down
-+
+the processes under Mac OS X (10.4) by about 60% due to processor napping.
-+
-+
+Made xform, replmarks and rad2mgf handle quoted modifiers and names properly.
-+
-+
+Fixed problem in genblinds, where it was generating slats that were too
-+
+wide with the +/-r option.  (Thanks to Helena Buelow-Huebe for discovering
-+
+this bug.)
-+
-+
+Fixed bug in ra_ppm for 16-bit/sample i/o, where it was getting the byte
-+
+order wrong (apparently).
-+
-+
+Added -V option to rtcontrib to report actual contributions, rather than
-+
+just ray coefficients.
-+
-+
+Fixed bug in ranimate that caused it to fail in continuation of renderings.
-+
-+
+Renamed librt.a to librtrad.a, to avoid conflict on Solaris. Almost
-+
+everything now gets linked to -lrtrad instead of -lrt.
-+
-+
+Fixed problem with large sample sets, so -u+ option now is truly random.
-+
+Thanks to Rick Mistrick and Younju Yoon for identifying this problem,
-+
+which was related to a poorly designed hash function.
-+
-+
+Changed -u+ to be the default setting in rtrace (only).
-+
-+
+Fixed binary i/o for rlam and vwrays under Windows.
-+
-+
+Added tmCvLums() to tone-mapping routines using a 16-bit lookup table
-+
+on IEEE floats, which is also used to improve speed of COLOR conversions,
-+
+especially on machines with slow log() calls.  The first call to
-+
+tmCvLums(), tmCvGrays(), or tmCvColors() initializes the table.
-+
-+
+Created optics2rad.csh script to convert from Optics 5 material output
-+
+to something correct for Radiance.  Built on old glazing.cal function,
-+
+which is actually incorrect so removed from the distribution.
-+
-+
+Fixed nuisance bug in ximage under some SGI machines that caused it to
-+
+choose an inappropriate visual and display incorrect colors.  (Thanks
-+
+to Oskar Itzinger for debugging the problem.)
-+
-+
+Fixed long-standing inaccuracy of pcompos -t and +t thresholding options.
-+
-+
+Fixed bug in handling of views with tabs rather than spaces.
-+
-+
+Fixed bug related to alias of alias.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed default sky turbidity in gensky from the original default of
-+
+.75 to the CIE 110-1994 standard value of 2.45.  Thanks to Marilyne
-+
+Anderson of MIT for pointing out this discrepancy.
-+
-+
+Added -o option to ra_xyze to produce original pixel values.
-+
-+
+Fixed bug in tracing of virtual sources, where intervening glazing was
-+
+not being accounted for properly.
-+
-+
+Added -h option to pcompos and pcomb to eliminate verbose headers.
-+
-+
+=====================
-+
+Version 3.9 (Released 3/30/08)
-+
-+
+Added -spec option to falsecolor to restore original spectral color scale.
-+
+Also added "-s auto" option to automatically set the maximum value.
-+
-+
+Added byte-swapping input and output to rcalc.
-+
-+
+Additional error-checking for source surfaces.
-+
-+
+Re-fixed bug in octree code that caused it to allocate 8 times as
-+
+much memory as it actually used(!) -- this was pointed out way back
-+
+in 1999 by Erik Reinhard and Erik Jansen, but the fix they gave me
-+
+got lost in the slightly broken release process at the time.  This
-+
+should make a big difference in memory usage, especially for the
-+
+new mesh primitive.  (I measured 30% less memory usage.)
-+
-+
+Corrected ray weights for material mixtures.
-+
-+
+Reduced the default -n setting for obj2mesh to take better advantage
-+
+of the smaller octree structure size.
-+
-+
+Fixed bug in shadow cache where it was adding surfaces with antimatter
-+
+holes cut in them to the obstructor list.  Thanks to John Mardaljevic
-+
+for discovering and reporting the problem.
-+
-+
+Adding ability in mkillum to incorporate BSDF data in calculation.
-+
+Internal interface (raypcalls) now used in place of rtrace process(es).
-+
-+
+Fixed pixel alignment in pcomb for size reduction and enlargement.
-+
-+
+Allow rtcontrib user to set -P and -PP options for persistent rendering.
-+
+The only caveat is that -n setting > 1 requires -PP rather than -P.
-+
-+
+Added -c option to rtcontrib to facilitate cumulative calculations.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Fixed long-standing bug in source.cal, which caused it to produce
-+
+reversed anisotropic photometric distributions due to the
-+
+misorientation of the y-axis.  Thanks to Zack Rogers for discovering
-+
+and helping debug this problem.
-+
-+
+Fixed long-standing bug in replmarks, where triangles with X-side
-+
+aligned with Z-axis would cause incorrect rotations.  Thanks to
-+
+Zack Rogers for finding this error.
-+
-+
+Added rsensor program to compute sensor signal for daylighting controls.
-+
+Funding for this component was provided by the Architectural Energy
-+
+Corporation in Boulder, CO, and directed by Zack Rogers.
-+
-+
+Added "planisphere" (stereographic) fisheye view type for traditional
-+
+daylighting analysis.  Feature requested & explained by Axel Jacobs.
-+
-+
+Modified -c option to rtcontrib so it can take a number of input
-+
+rays to average over, rather than only produce a single accumulated
-+
+record (which can now be done with -c 0).
-+
-+
+=====================
-+
+Version 4.0 (Released 3/12/10)
-+
-+
+Added -n option to rvu to provide parallel rendering.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed ".pic" extension to ".hdr" in all sources and documentation
-+
+to improve interoperability with other software, since this has become
-+
+the de facto extension for Radiance RGBE and XYZE pictures.  Since file
-+
+extensions were never more than a convention in Radiance, this does not
-+
+affect operation, but may require the update of scripts, etc. written
-+
+by others that assume the ".pic" suffix for Radiance output.
-+
-+
+Added -N option to objview to support multiprocessing.
-+
-+
+Improved sampling of circular sources (source, sphere, ring types) with
-+
+quite a bit of help from David Geisler-Moroder.
-+
-+
+Added "rpict" and "rvu" variables to rad, and made these as well as
-+
+the "oconv", "mkillum" and "pfilt" variables accept an alternate
-+
+command path in each case.  Change suggested by Lars Grobe based
-+
+on similar Radzilla (radz) facility by Carsten Bauer.
-+
-+
+Fixed rad -v N specification to use actual view name if one.
-+
-+
+Fixed error in mkillum calculation where it neglected indirect
-+
+source contributions from BTDF illum's.
-+
-+
+Added GMT and LATLONG header lines for Greenwich Mean Time and
-+
+degrees North Latitude / East Longitude.
-+
-+
+Added gendaylit to distribution (finally).
-+
-+
+Added ability in vwright(1) to get view from command line arguments.
-+
-+
+Created genklemsamp(1) utility to generate samples suitable for
-+
+BSDF-based annual calculations.  This is the first Perl script to
-+
+be added to Radiance.  Hopefully, others will follow.
-+
-+
+Added klems_int.cal file to compute Klems bins for windows.
-+
-+
+Created genskyvec  utility to sample a particular sky and
-+
+evaluate average radiance over the standard Tregenza sky patches.
-+
-+
+Created dctimestep program to compute a set of sensor values or
-+
+a combined image for a particular time using the daylight
-+
+coefficient method.
-+
-+
+Created src/rt/rayfifo.c for first-in/first-out handling of
-+
+multiprocessing by raypcalls.c.
-+
-+
+Added -n option to rtrace for executing on multiple cores
-+
+using new rayfifo calls.
-+
-+
+=====================
-+
+Version 4.1 (Released 11/04/2011)
-+
-+
+Changed ranimate behavior so remote login under a different user
-+
+doesn't necessarily require the presence of the originating user's
-+
+home directory.
-+
-+
+Changed standard transmission function normalization back to what
-+
+it was in version 3.5, following recommendation of David Geisler-Moroder,
-+
+who pointed out that the revised BTDF increased too much at grazing.
-+
-+
+Changed rad behavior with -N >1 on single view to call rpiece.
-+
-+
+Updated SCons build system for MINGW compilation, thanks to Christian
-+
+Kohler.
-+
-+
+Added -u option to rlam for unbuffered output.
-+
-+
+Modified dctimestep to accept sky vector and daylight coefficient matrix
-+
+or list of images to sum together, as suggested by Andy McNeil.
-+
-+
+Created genBSDF script to generate BSDF in Windows XML format.
-+
-+
+Modified mkillum to accept detailed geometry from BSDF XML files.
-+
-+
+Altered obj2rad to ignore zero normals (thanks to Jack de Valpine for
-+
+suggestions and help).
-+
-+
+Fixed bug in genklemsamp that caused non-uniform sampling over surfaces.
-+
-+
+Fixed bugs in rhoptimize and rhcopy for 64-bit compilation.
-+
-+
+Made a change to avoid problem using gcc --fast-math compile option.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed behavior of rtrace and rtcontrib so that every scanline is
-+
+not flushed when both -x and -y are set.  This avoids flush delays
-+
+in rtcontrib for large numbers of output files and delays while
-+
+rendering images using rtrace with the -n option.
-+
-+
+Added ability for rsensor to output ray origins and directions
-+
+rather than actually loading octree and computing sensor value.
-+
-+
+Fixed old bug in obj2rad where it would stop processing and
-+
+report a syntax error if the "void" type is used in the map file.
-+
-+
+Updated reflection model according to EGSR 2010 paper by David
-+
+Geisler-Moroder and Arne Duer.
-+
-+
+Replaced C-shell version of falsecolor with Perl script written
-+
+by Axel Jacobs.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed -sj (specular jitter) option to something called specular
-+
+sampling (-ss), which if set less than 1 has the same behavior as
-+
+the old -sj, but when set greater than 1, spawns multiple ray
-+
+samples from semi-specular surfaces.
-+
-+
+Fixed bug noticed by Randolph Fritz that caused ambient sync errors.
-+
-+
+Fixed bug in findglare for reading picture files under Windows.
-+
-+
+Added options to pvalue to note other color spaces on reverse conversion.
-+
+Thanks to Erich Philips for the feature request.
-+
-+
+Added BSDF data-driven material type with full sampling support.
-+
-+
+Added BRDF calculations to genBSDF.
-+
-+
+Bug fixes in rsensor thanks to help from David Geisler-Moroder.
-+
-+
+Added variable-resolution BSDF support in renderers and genBSDF.
-+
-+
+Created pkgBSDF program to extract BSDF geometry and put it
-+
+together with surface description suitable for inclusion in
-+
+a Radiance scene.
-+
-+
+Muted warning for "no light sources found" when there is at least
-+
+one glow object and interreflections are on (-ab > 0).
-+
-+
+Fixed long-standing bug that caused underestimation of reflection
-+
+when specular component was below -st threshold in non-metals.
-+
-+
+Checked in cross-platform cmake build system created by Bill Hoffman
-+
+of KitWare and sponsored by NREL.  This includes a qt-based
-+
+driver for rvu, which is built in the new subdirectory src/qtrvu.
-+
-+
+=====================
-+
+Version 4.2
-+
-+
+Axel Jacobs added -cp and -palettes options to falsecolor.
-+
-+
+Fixed bug in matrix output of genBSDF introduced shortly before 4.1 release.
-+
-+
+Made rvu more responsive in multi-processing mode when changing parameters.
-+
+Explicit "new" command not needed to show changes, because it goes back
-+
+to "immediate mode" once something is changed.  Processing will be slow
-+
+but response time quick until next "new" command.
-+
-+
+Fixed major bug in transmitting proxy material sampling.
-+
-+
+Patched cmake build tools (changes by Zack Galbreath).
-+
-+
+Removed requirement for pflip -h to be given input file (can pipe from stdin).
-+
-+
+Added "Number of processes" slider to trad "Action" pane to control rad -N
-+
+option for rvu and batch rendering.
-+
-+
+Added -c option to vwrays to repeat pixels for rtcontrib.
-+
-+
+Reworked rtcontrib program and renamed to rcontrib.  New version runs much
-+
+faster, especially on multiprocessor systems, and doesn't require as much
-+
+memory.  No longer calls rtrace; instead does all the work itself.
-+
-+
+Added -d option to genskyvec to produce direct-only (sun no sky) vector.
-+
-+
+Added Ashikhmin-Shirley anisotropic BRDF model (ashik2) with help
-+
+from Nicolas Boneel.
-+
-+
+Added Ruby rewrite of objview.csh by Rob Guglielmetti.
-+
-+
+Fixed bug in reciprocity for tensor tree BTDF representations.  Thanks
-+
+to Andy McNeil for identifying the problem.
-+
-+
+Added MNAME and ZNAME variables to ranimove for debugging & testing.
-+
-+
+Created pmblur2 command to take motion and depth buffers from ranimove
-+
+to compute a better motion blur.
-+
-+
+****** COMPATIBILITY CHANGE ********
-+
+Changed BSDF routines to use updated/corrected XML specification and
-+
+removed depracated BSDF support from mkillum.
-+
-+
+Fixed behavior of i/o flushing in rcontrib with -c > 1 (averaging).  Thanks
-+
+to Lars Grobe for help identifying this problem.
-+
-+
+Fixed bug in depth-of-field blur where view distance was measured from
-+
+fore clipping plane rather than viewpoint.  Thanks to Peter A-B for
-+
+pointing this out.
-+
-+
+Added options to dctimestep to allow multiple time steps (-n)
-+
+and multiple output pictures or sensor files (-o).  Also added -i
-+
+option to specify float (-if) or double (-id) input for sky matrix.
-+
-+
+Created gendaymtx program to compute annual sky patch matrix based
-+
+on Ian Ashdown's implementation of Perez all-weather sky model.
-+
+Output can be sent directly to dctimestep in ASCII or binary stream.
-+
-+
+Replaced existing gendaylit.c with improved version from Wendelin Sprenger
-+
+and Jan Wienold of ISE.
-+
-+
+Improved accuracy of ambient calculation for large -ad settings.  Thanks
-+
+to Lars Grobe for noticing the problem.
-+
-+
+Added -r option to gendaymtx to rotate the sky the specified number of
-+
+degrees about the zenith as suggested by A. McNeil.
-+
-+
+Axel Jacobs added -pal eco color map that does a blue-red-yellow scale.
-+
-+
+Created bsdf2klems tool to convert from various BSDF representations to
-+
+Klems basis matrix in XML file.
-+
-+
+Fixed problem with inappropriate reciprocity enforcement on tensor
-+
+tree reduction in genBSDF.  (Thanks to A.McNeil for discovering issue.)

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing ray/doc/notes/ReleaseNotes (file contents): Revision 1.2 by greg, Tue Mar 18 04:45:28 2003 UTC vs. Revision 1.219 by greg, Mon Aug 5 22:56:50 2013 UTC

Diff Legend

Comparing ray/doc/notes/ReleaseNotes (file contents):
Revision 1.2 by greg, Tue Mar 18 04:45:28 2003 UTC vs.
Revision 1.219 by greg, Mon Aug 5 22:56:50 2013 UTC