--- ray/doc/man/man1/vwrays.1	2012/06/14 05:19:05	1.9
+++ ray/doc/man/man1/vwrays.1	2021/12/04 16:29:29	1.12
@@ -1,4 +1,4 @@
-.\" RCSid "$Id: vwrays.1,v 1.9 2012/06/14 05:19:05 greg Exp $"
+.\" RCSid "$Id: vwrays.1,v 1.12 2021/12/04 16:29:29 greg Exp $"
 .TH VWRAYS 1 1/15/99 RADIANCE
 .SH NAME
 vwrays - compute rays for a given picture or view
@@ -41,13 +41,15 @@ The
 .I \-c
 option repeats each pixel the given number of times (default is 1).
 This is most useful when sending rays to
-.I rtcontrib(1)
+.I rcontrib(1)
 with the same
 .I \-c
 setting, providing a much faster way to average pixels over image sets.
 The
 .I \-pj
-option should be used to jitter sample postions in most cases.
+and/or
+.I \-pd
+options should be used to jitter sample postions in most cases.
 .PP
 View options may be any combination of standard view parameters described
 in the
@@ -70,7 +72,10 @@ aspect ratio, unless this ratio is set to zero.
 The
 .I \-pj
 option may be used to jitter samples.
-The default value of 0 turns off ray jittering.
+The
+.I \-pd
+option specifies a world-diameter aperture for depth-of-field jittering.
+The default value of 0 for both options turns off all ray jittering.
 .PP
 If the
 .I \-d
@@ -144,4 +149,4 @@ can reproduce any pixel ordering (i.e., any image orie
 a rendered picture, it will only produce standard scanline-ordered rays when 
 given a set of view parameters.
 .SH "SEE ALSO"
-rcalc(1), rpict(1), rtcontrib(1), rtrace(1)
+rcalc(1), rcode_depth(1), rcontrib(1), rpict(1), rtpict(1), rtrace(1)