--- ray/doc/man/man1/vwrays.1	2011/08/20 20:57:51	1.8
+++ ray/doc/man/man1/vwrays.1	2021/12/04 16:29:29	1.12
@@ -1,10 +1,10 @@
-.\" RCSid "$Id: vwrays.1,v 1.8 2011/08/20 20:57:51 greg Exp $"
+.\" RCSid "$Id: vwrays.1,v 1.12 2021/12/04 16:29:29 greg Exp $"
 .TH VWRAYS 1 1/15/99 RADIANCE
 .SH NAME
 vwrays - compute rays for a given picture or view
 .SH SYNOPSIS
 .B vwrays
-.B "[ -i -u -f{a|f|d} | -d ]"
+.B "[ -i -u -f{a|f|d} -c rept | -d ]"
 {
 .B "view opts .."
 |
@@ -37,6 +37,20 @@ Using raw float or double records for example can redu
 requirements of transferring and interpreting information in
 .I rtrace.
 .PP
+The
+.I \-c
+option repeats each pixel the given number of times (default is 1).
+This is most useful when sending rays to
+.I rcontrib(1)
+with the same
+.I \-c
+setting, providing a much faster way to average pixels over image sets.
+The
+.I \-pj
+and/or
+.I \-pd
+options should be used to jitter sample postions in most cases.
+.PP
 View options may be any combination of standard view parameters described
 in the
 .I rpict(1)
@@ -58,7 +72,10 @@ aspect ratio, unless this ratio is set to zero.
 The
 .I \-pj
 option may be used to jitter samples.
-The default value of 0 turns off ray jittering.
+The
+.I \-pd
+option specifies a world-diameter aperture for depth-of-field jittering.
+The default value of 0 for both options turns off all ray jittering.
 .PP
 If the
 .I \-d
@@ -132,4 +149,4 @@ can reproduce any pixel ordering (i.e., any image orie
 a rendered picture, it will only produce standard scanline-ordered rays when 
 given a set of view parameters.
 .SH "SEE ALSO"
-rcalc(1), rpict(1), rtcontrib(1), rtrace(1)
+rcalc(1), rcode_depth(1), rcontrib(1), rpict(1), rtpict(1), rtrace(1)