--- ray/doc/man/man1/rsensor.1 2012/06/14 22:42:21 1.5 +++ ray/doc/man/man1/rsensor.1 2015/06/09 21:34:14 1.6 @@ -1,4 +1,4 @@ -.\" RCSid "$Id: rsensor.1,v 1.5 2012/06/14 22:42:21 greg Exp $" +.\" RCSid "$Id: rsensor.1,v 1.6 2015/06/09 21:34:14 greg Exp $" .TH RSENSOR 1 4/11/2008 RADIANCE .SH NAME rsensor - compute sensor signal from a RADIANCE scene @@ -89,8 +89,14 @@ The actual data contained in the sensor file correspon tab-separated matrix specification, where the column header has "degrees" in the leftmost column, followed by evenly-spaced azimuthal angles. +Azimuth angles must start at 0 and proceed to at least 270 degrees. +No symmetry is applied to missing values. Each row begins with the polar angle, and is followed by the relative sensitivity values for each direction. +Polar angles must start from 0 and continue to the edge of +the sensor's view. +Polar angles above the last row listed are assumed to have +zero sensitivity. A low-resolution example of a sensor file is given below: .sp .nf