| 18 |
|
] |
| 19 |
|
.br |
| 20 |
|
.B "rpict [ options ] \-defaults" |
| 21 |
+ |
.br |
| 22 |
+ |
.B "rpict \-features [feat1 ..]" |
| 23 |
|
.SH DESCRIPTION |
| 24 |
|
.I Rpict |
| 25 |
|
generates a picture from the RADIANCE scene given in |
| 43 |
|
for the options (modified by those options present) |
| 44 |
|
are printed with a brief explanation. |
| 45 |
|
.PP |
| 46 |
+ |
In the third form, a list of supported features is sent |
| 47 |
+ |
to the standard output, one per line. |
| 48 |
+ |
If additional arguments follow, they are checked for presence in |
| 49 |
+ |
this list. |
| 50 |
+ |
If a feature includes subfeatures, these may be checked as well by |
| 51 |
+ |
specifying: |
| 52 |
+ |
.nf |
| 53 |
+ |
|
| 54 |
+ |
rpict -features FeatName=subfeat1,subfeat2 |
| 55 |
+ |
|
| 56 |
+ |
.fi |
| 57 |
+ |
If any named feature or subfeature is missing, an error is |
| 58 |
+ |
reported and the program returns an error status. |
| 59 |
+ |
If all of the named features are present, a zero status is returned. |
| 60 |
+ |
.PP |
| 61 |
|
Most options are followed by one or more arguments, which must be |
| 62 |
|
separated from the option and each other by white space. |
| 63 |
|
The exceptions to this rule are the |
| 271 |
|
.I \-pd |
| 272 |
|
option, to avoid the ghosting effect of too few samples. |
| 273 |
|
.TP |
| 274 |
+ |
.BI -pc " xr yr xg yg xb yb xw yw" |
| 275 |
+ |
Use the specified chromaticity pairs for output primaries and white |
| 276 |
+ |
point rather than the standard RGB color space. |
| 277 |
+ |
.TP |
| 278 |
+ |
.BR \-pRGB |
| 279 |
+ |
Output standard RGB values (the default). |
| 280 |
+ |
.TP |
| 281 |
+ |
.BR \-pXYZ |
| 282 |
+ |
Output standard CIE XYZ tristimulus values rather than RGB. |
| 283 |
+ |
.TP |
| 284 |
+ |
.BI -f \ source |
| 285 |
+ |
Load definitions from |
| 286 |
+ |
.I source |
| 287 |
+ |
and assign at global level. |
| 288 |
+ |
.TP |
| 289 |
+ |
.BI -e \ expr |
| 290 |
+ |
Set additional definitions from |
| 291 |
+ |
.I expr. |
| 292 |
+ |
.TP |
| 293 |
|
.BI -dj \ frac |
| 294 |
|
Set the direct jittering to |
| 295 |
|
.I frac. |
| 346 |
|
specification will be calculated. |
| 347 |
|
.TP |
| 348 |
|
.BI -dr \ N |
| 349 |
< |
Set the number of relays for secondary sources to |
| 349 |
> |
Set the number of relays for virtual sources to |
| 350 |
|
.I N. |
| 351 |
< |
A value of 0 means that secondary sources will be ignored. |
| 351 |
> |
A value of 0 means that virtual sources will be ignored. |
| 352 |
|
A value of 1 means that sources will be made into first generation |
| 353 |
< |
secondary sources; a value of 2 means that first generation |
| 354 |
< |
secondary sources will also be made into second generation secondary |
| 353 |
> |
virtual sources; a value of 2 means that first generation |
| 354 |
> |
virtual sources will also be made into second generation virtual |
| 355 |
|
sources, and so on. |
| 356 |
|
.TP |
| 357 |
|
.BI -dp \ D |
| 358 |
< |
Set the secondary source presampling density to D. |
| 358 |
> |
Set the virtual source presampling density to D. |
| 359 |
|
This is the number of samples per steradian |
| 360 |
|
that will be used to determine ahead of time whether or not |
| 361 |
|
it is worth following shadow rays through all the reflections and/or |
| 362 |
< |
transmissions associated with a secondary source path. |
| 363 |
< |
A value of 0 means that the full secondary source path will always |
| 362 |
> |
transmissions associated with a virtual source path. |
| 363 |
> |
A value of 0 means that the full virtual source path will always |
| 364 |
|
be tested for shadows if it is tested at all. |
| 365 |
|
.TP |
| 366 |
|
.BR \-dv |
| 475 |
|
Set the ambient accuracy to |
| 476 |
|
.I acc. |
| 477 |
|
This value will approximately equal the error |
| 478 |
< |
from indirect illuminance interpolation. |
| 478 |
> |
from indirect irradiance interpolation. |
| 479 |
|
A value of zero implies no interpolation. |
| 480 |
|
.TP |
| 481 |
|
.BI -ad \ N |
| 482 |
|
Set the number of ambient divisions to |
| 483 |
|
.I N. |
| 484 |
|
The error in the Monte Carlo calculation of indirect |
| 485 |
< |
illuminance will be inversely proportional to the square |
| 485 |
> |
irradiance will be inversely proportional to the square |
| 486 |
|
root of this number. |
| 487 |
|
A value of zero implies no indirect calculation. |
| 488 |
|
.TP |
| 495 |
|
.BI -af \ fname |
| 496 |
|
Set the ambient file to |
| 497 |
|
.I fname. |
| 498 |
< |
This is where indirect illuminance will be stored and retrieved. |
| 499 |
< |
Normally, indirect illuminance values are kept in memory and |
| 498 |
> |
This is where indirect irradiance will be stored and retrieved. |
| 499 |
> |
Normally, indirect irradiance values are kept in memory and |
| 500 |
|
lost when the program finishes or dies. |
| 501 |
< |
By using a file, different invocations can share illuminance |
| 501 |
> |
By using a file, different invocations can share irradiance |
| 502 |
|
values, saving time in the computation. |
| 503 |
|
Also, by creating an ambient file during a low-resolution rendering, |
| 504 |
|
better results can be obtained in a second high-resolution pass. |
| 718 |
|
divided by the given |
| 719 |
|
.I frac. |
| 720 |
|
.TP |
| 721 |
+ |
.BI -cs \ Ns |
| 722 |
+ |
Use |
| 723 |
+ |
.I Ns |
| 724 |
+ |
bands for spectral sampling rather than the default RGB calculation space. |
| 725 |
+ |
The maximum setting is controlled by the compiler macro MAXCSAMP, and |
| 726 |
+ |
defaults to 24. |
| 727 |
+ |
Larger values for Ns will be reduced to MAXCSAMP. |
| 728 |
+ |
.TP |
| 729 |
+ |
.BI -cw " nmA nmB" |
| 730 |
+ |
Set extrema to the given wavelengths for spectral sampling. |
| 731 |
+ |
The default is 380 and 780 nanometers. |
| 732 |
+ |
The order specified does not matter. |
| 733 |
+ |
.TP |
| 734 |
|
.BI -S \ seqstart |
| 735 |
|
Instead of generating a single picture based only on the view |
| 736 |
|
parameters given on the command line, this option causes |
| 925 |
|
Send error messages and progress reports to |
| 926 |
|
.I efile |
| 927 |
|
instead of the standard error. |
| 928 |
+ |
(Note this option overlaps with "-e expr" above, so file paths |
| 929 |
+ |
with '=' or ':' in them are not allowed on this option.) |
| 930 |
|
.TP |
| 931 |
|
.BR \-w |
| 932 |
|
Boolean switch for warning messages. |
| 937 |
|
.PP |
| 938 |
|
rpict \-S 1 \-o frame%02d.hdr scene.oct < keyframes.vf |
| 939 |
|
.PP |
| 940 |
< |
To render ambient illuminance in photon mapping mode from a global photon |
| 940 |
> |
To render ambient irradiance in photon mapping mode from a global photon |
| 941 |
|
map global.pm via one ambient bounce, and from a caustic photon map |
| 942 |
|
caustic.pm: |
| 943 |
|
.IP "" .2i |
