man/man1/rcollate.1

.\" RCSid "$Id: rcollate.1,v 1.9 2019/11/08 02:10:38 greg Exp $"
.TH RCOLLATE 1 7/8/97 RADIANCE
.SH NAME
rcollate - resize or transpose matrix data
.SH SYNOPSIS
.B rcollate
[
.B \-h[io]
][
.B \-w
][
.B \-f[afdb][N]
][
.B \-t
][
.B "\-ic in_col"
][
.B "\-ir in_row"
][
.B "\-oc out_col"
][
.B "\-or out_row"
][
.B "\-o RxC[xR1xC2..]"
]
[
.B input.dat
]
.SH DESCRIPTION
.I Rcollate
reads in a single matrix file (table) and reshapes it to have
the number of columns specified by the
.I \-oc
option.
The number of rows may be specified with a
.I \-or
option, or may be determined automatically from the size of the input if
it is an even multiple of the number of columns (as it should be).
Alternatively, both may be specified using a
.I \-o
option with the number of rows and columns separated by an 'x', as in "30x14"
for 30 rows by 14 columns.
.I Rcollate
can also reorder the input into nested blocks by continuing the output size
string, "3x10X7x2" would order output data with a 3x10 super-array of 7x2
subblocks.
This is a convenient way to visualize tensor data.
.PP
By default, the file is assumed to include an information header, which
is copied to the standard output along with the command name.
The
.I \-hi
option may be used to turn off the expectation of a header on input.
The
.I \-ho
option turns off header output, and
.I \-h
by itself turns off both input and output headers.
The
.I \-w
option turns off non-fatal warning messages, such as unexpected EOD.
.PP
The input format is assumed to be ASCII, with three white-space separated words
(typically numbers) in each record.
A different input format may be specified with the
.I \-f
option.
The suboptions are
.I \-fa,
.I \-ff,
.I \-fd,
and
.I \-fb
for ASCII, float, double, and binary, respectively.
An optional count may be attached to specify the number of data elements per
record, which defaults to 1.
Thus, the default setting is
.I \-fa3.
Since
.I rcollate
does not interpret the fields, all binary options of the same
length have the same result.
On most architectures,
.I \-ff6,
.I \-fd3,
and
.I \-fb24
would all be equivalent.
Note that the lack of row separators in binary files means that
.I rcollate
does not actually do anything for binary files unless the transpose
option is given, also.
.PP
If an input header is present, it may contain the format, number of components
and matrix dimensions.
In such cases, the
.I \-ic,
.I \-ir
and
.I \-f
options are not required, but will be checked against the header
information if provided.
.PP
The transpose option,
.I \-t
swaps rows and columns on the input.
For binary files, the user must specify at least one input or output
dimension to define the matrix size.
For ASCII files,
.I rcollate
will automatically determine the number of columns based on the
position of the first EOL (end-of-line) character, and the number
of rows based on the total count of records in the file.
The user may override these determinations, allowing the matrix to
be resized as well as transposed.
If input and output dimensions are given, the number of input rows
must equal the number of output columns,
and the number of input columns must equal the number of output rows.
For large transpose operations on Unix systems, it is most efficient
to specify the input file on the command line, rather than reading
from the standard input, since
.I rcollate
can map the file directly into virtual memory.
If the
.I \-o
option is also given with multiple block levels, the transpose operation
will logically precede the reblocking operation.
.SH EXAMPLES
To change put 8760 color triplets per row in a matrix with no header:
.IP "" .2i
rcollate -h \-oc 8760 input.dat > col8760.dat
.PP
To transpose a binary file with 145 float triplets per input row:
.IP "" .2i
rcollate -ff3 -ic 145 -t orig.flt > transpose.flt
.PP
To create an appropriate header for a binary float matrix as required by
.I rmtxop(1)\:
.IP "" .2i
rcollate -hi -ff3 -or 145 -oc 8760 input.smx | rmtxop dcoef.dmx - > res.txt
.PP
To visualize a Shirley-Chiu BTDF matrix where the interior resolution is
64x64 and the exterior resolution is 32x32:
.IP "" .2i
rcollate -o 64x64X32x32 s-c_bsdf.mtx | rmtxop -fc - > s-c_bsdf.hdr
.SH AUTHOR
Greg Ward
.SH NOTES
The
.I rcollate
command is rather inflexible when it comes to output field and record
separators for ASCII data.
It accepts any amount of white space between fields
on input, but only produces spaces as field separators
between words and tabs as record separators on output.
Output row separtors will always be an EOL, which may differ between systems.
.PP
If no options are given on the command line, or a binary file is specified
without a transpose,
.I rcollate
issues a warning and simply copies its input to its standard output.
.SH "SEE ALSO"
cnt(1), histo(1), neaten(1), rcalc(1), rlam(1), rmtxop(1), 
rsplit(1), tabfunc(1), total(1)
Revision:	1.10
Committed:	Fri Nov 8 05:39:05 2019 UTC (5 years, 7 months ago) by greg
Branch:	MAIN
Changes since 1.9:	+5 -1 lines
Log Message:	Fixing minor issues with new -o code
#	Content
1	.\" RCSid "$Id: rcollate.1,v 1.9 2019/11/08 02:10:38 greg Exp $"
2	.TH RCOLLATE 1 7/8/97 RADIANCE
3	.SH NAME
4	rcollate - resize or transpose matrix data
5	.SH SYNOPSIS
6	.B rcollate
7	[
8	.B \-h[io]
9	][
10	.B \-w
11	][
12	.B \-f[afdb][N]
13	][
14	.B \-t
15	][
16	.B "\-ic in_col"
17	][
18	.B "\-ir in_row"
19	][
20	.B "\-oc out_col"
21	][
22	.B "\-or out_row"
23	][
24	.B "\-o RxC[xR1xC2..]"
25	]
26	[
27	.B input.dat
28	]
29	.SH DESCRIPTION
30	.I Rcollate
31	reads in a single matrix file (table) and reshapes it to have
32	the number of columns specified by the
33	.I \-oc
34	option.
35	The number of rows may be specified with a
36	.I \-or
37	option, or may be determined automatically from the size of the input if
38	it is an even multiple of the number of columns (as it should be).
39	Alternatively, both may be specified using a
40	.I \-o
41	option with the number of rows and columns separated by an 'x', as in "30x14"
42	for 30 rows by 14 columns.
43	.I Rcollate
44	can also reorder the input into nested blocks by continuing the output size
45	string, "3x10X7x2" would order output data with a 3x10 super-array of 7x2
46	subblocks.
47	This is a convenient way to visualize tensor data.
48	.PP
49	By default, the file is assumed to include an information header, which
50	is copied to the standard output along with the command name.
51	The
52	.I \-hi
53	option may be used to turn off the expectation of a header on input.
54	The
55	.I \-ho
56	option turns off header output, and
57	.I \-h
58	by itself turns off both input and output headers.
59	The
60	.I \-w
61	option turns off non-fatal warning messages, such as unexpected EOD.
62	.PP
63	The input format is assumed to be ASCII, with three white-space separated words
64	(typically numbers) in each record.
65	A different input format may be specified with the
66	.I \-f
67	option.
68	The suboptions are
69	.I \-fa,
70	.I \-ff,
71	.I \-fd,
72	and
73	.I \-fb
74	for ASCII, float, double, and binary, respectively.
75	An optional count may be attached to specify the number of data elements per
76	record, which defaults to 1.
77	Thus, the default setting is
78	.I \-fa3.
79	Since
80	.I rcollate
81	does not interpret the fields, all binary options of the same
82	length have the same result.
83	On most architectures,
84	.I \-ff6,
85	.I \-fd3,
86	and
87	.I \-fb24
88	would all be equivalent.
89	Note that the lack of row separators in binary files means that
90	.I rcollate
91	does not actually do anything for binary files unless the transpose
92	option is given, also.
93	.PP
94	If an input header is present, it may contain the format, number of components
95	and matrix dimensions.
96	In such cases, the
97	.I \-ic,
98	.I \-ir
99	and
100	.I \-f
101	options are not required, but will be checked against the header
102	information if provided.
103	.PP
104	The transpose option,
105	.I \-t
106	swaps rows and columns on the input.
107	For binary files, the user must specify at least one input or output
108	dimension to define the matrix size.
109	For ASCII files,
110	.I rcollate
111	will automatically determine the number of columns based on the
112	position of the first EOL (end-of-line) character, and the number
113	of rows based on the total count of records in the file.
114	The user may override these determinations, allowing the matrix to
115	be resized as well as transposed.
116	If input and output dimensions are given, the number of input rows
117	must equal the number of output columns,
118	and the number of input columns must equal the number of output rows.
119	For large transpose operations on Unix systems, it is most efficient
120	to specify the input file on the command line, rather than reading
121	from the standard input, since
122	.I rcollate
123	can map the file directly into virtual memory.
124	If the
125	.I \-o
126	option is also given with multiple block levels, the transpose operation
127	will logically precede the reblocking operation.
128	.SH EXAMPLES
129	To change put 8760 color triplets per row in a matrix with no header:
130	.IP "" .2i
131	rcollate -h \-oc 8760 input.dat > col8760.dat
132	.PP
133	To transpose a binary file with 145 float triplets per input row:
134	.IP "" .2i
135	rcollate -ff3 -ic 145 -t orig.flt > transpose.flt
136	.PP
137	To create an appropriate header for a binary float matrix as required by
138	.I rmtxop(1)\:
139	.IP "" .2i
140	rcollate -hi -ff3 -or 145 -oc 8760 input.smx \| rmtxop dcoef.dmx - > res.txt
141	.PP
142	To visualize a Shirley-Chiu BTDF matrix where the interior resolution is
143	64x64 and the exterior resolution is 32x32:
144	.IP "" .2i
145	rcollate -o 64x64X32x32 s-c_bsdf.mtx \| rmtxop -fc - > s-c_bsdf.hdr
146	.SH AUTHOR
147	Greg Ward
148	.SH NOTES
149	The
150	.I rcollate
151	command is rather inflexible when it comes to output field and record
152	separators for ASCII data.
153	It accepts any amount of white space between fields
154	on input, but only produces spaces as field separators
155	between words and tabs as record separators on output.
156	Output row separtors will always be an EOL, which may differ between systems.
157	.PP
158	If no options are given on the command line, or a binary file is specified
159	without a transpose,
160	.I rcollate
161	issues a warning and simply copies its input to its standard output.
162	.SH "SEE ALSO"
163	cnt(1), histo(1), neaten(1), rcalc(1), rlam(1), rmtxop(1),
164	rsplit(1), tabfunc(1), total(1)