man/man1/ranimate.1

.\" RCSid "$Id: ranimate.1,v 1.4 2005/01/18 20:19:56 greg Exp $"
.TH RANIMATE 1 6/24/98 RADIANCE
.SH NAME
ranimate - compute a RADIANCE animation
.SH SYNOPSIS
.B ranimate
[
.B \-s
][
.B \-n
][
.B \-e
][
.B \-w
]
.B ranfile
.SH DESCRIPTION
.I Ranimate
is an executive program that reads the given
.I ranfile
and makes appropriate calls to
.I rad(1),
.I rpict(1),
.I pinterp(1),
and/or
.I pfilt(1)
to render an animation.
Variables in
.I ranfile
indicate input files, process servers (execution hosts), output
directories and file names, and various other controls and options.
.PP
Normally, commands are echoed to the standard output as they are
executed.
The
.I \-s
option tells
.I ranimate
to do its work silently.
The
.I \-n
option tells
.I ranimate
not to take any action (ie. not to actually execute any commands).
The
.I \-e
option tells
.I ranimate
to explicate all variables used for the animation, including
default values not specified in the input file, and print them on
the standard output.
.PP
The
.I \-w
option turns off warnings about multiply and misassigned variables.
.PP
Normally,
.I ranimate
will produce one animation frame for each view given in the specified
view file.
If an animation has ended or been killed in an incomplete state, however,
.I ranimate
will attempt to pick up where the earlier process left off.
If the process is still running, or was started on another machine,
.I ranimate
will report this information and exit.
.PP
Animation variable assignments appear one per line in
.I ranfile.
The name of the variable is followed by an equals sign
('=') and its value(s).
The end of line may be escaped with a backslash ('\\'), though it is
not usually necessary since additional variable values may be given
in multiple assignments.
Variables that should have only one value are given in upper case.
Variables that may have multiple values are given in lower case.
Variables may be abbreviated by their first three letters, except
for "host", which must have all four.
Comments in
.I ranfile
start with a pound sign ('#') and proceed to the end of line.
.PP
The animation variables, their interpretations and default values
are given below.
.TP 10n
.BR DIRECTORY
The name of the animation directory.
All temporary files generated during the animation will be placed in
this directory, which will be created by
.I ranimate
if it does not exist.
A file named "STATUS" will also be created there, and will contain current
information about the animation process.
This variable has no default value, and its setting is required.
.TP
.BR OCTREE
The name of the octree file for a static scene walk-through
animation.
There is no default value for this variable, and any
setting will be ignored if the
.I ANIMATE
variable is also set (see below).
.TP
.BR ANIMATE
The scene generation command for a dynamic animation.
This command, if given, will be executed with the frame number as the
final argument, and on its standard output it must produce
the complete octree for that frame.
Care must be taken that this command does not create any temporary files
that might collide with same-named files created by other
animation commands running in parallel.
Also, the command should produce no output to the standard error, unless
there is a fatal condition.
(I.e., switch all warnings off;
see the BUGS section, below.)\0
There is no default animation command, and either this variable or the
.I OCTREE
variable must be set.
.TP
.BR VIEWFILE
This variable names a file from which
.I ranimate
may extract the view for each frame in the animation.
This file should contain one valid view per frame, starting with
frame 1 on line 1, regardless of the setting of the
.I START
variable.
An exception is made for a view file with only a single view, which
is used for every frame of a dynamic scene animation.
This variable is required, and there is no default value.
.TP
.BR START
The initial frame number in this animation sequence.
The minimum value is 1, and if a later starting frame is given,
.I ranimate
assumes that the earlier frames are included in some other
.I ranfile,
which has been previously executed.
(See the
.I NEXTANIM
variable, below.)\0
The default value is 1.
.TP
.BR END
The final frame number in this sequence.
The minimum value is equal to the
.I START
frame,
and the default value is computed from the number of views in the
given
.I VIEWFILE.
.TP
.BR EXPOSURE
This variable tells
.I ranimate
how to adjust the exposure for each frame.
As in
.I pfilt,
the exposure setting may be given either as a multiplier or as a
number of f-stop adjustments (eg. +2 or -1.5).
Alternatively, a file name may be given, which
.I ranimate
will interpret as having one exposure value per line per frame,
beginning with frame 1 at line 1.
(See also the
.I VIEWFILE
variable, above.)\0
There is no default value for this variable.
If it is not given, an average level will be computed by
.I pfilt
for each frame.
.TP
.BR BASENAME
The base output file name for the final frames.
This string will be passed to the
.I \-o
and
.I \-z
options of rpict, along with appropriate suffixes,
and thus should contain a
.I printf(3)
style integer field to distinguish one frame number from another.
The final frames will use this name with a ".pic" suffix.
The default value is the assigned
.I DIRECTORY
followed by "/frame%03d".
.TP
.BR host
A host to use for command execution.
This variable may be assigned a host name, followed by an optional
number of parallel processes, followed by an optional
directory (relative to the user's home directory on that machine),
followed by an alternate user name.
Multiple
.I host
assignments may appear.
It is not advisable to specify more than one process on a single-CPU
host, as this just tends to slow things down.
The default value is "localhost", which starts a single process in
the current directory of the local machine.
.TP
.BR RIF
This variable specifies a
.I rad
input file to use as a source of rendering options and other
variable settings.
If given,
.I ranimate
will execute
.I rad
and create an options file to later pass to
.I rpict
or
.I rtrace.
Besides prepending the
.I render
variable,
.I ranimate
will also extract default settings for the common variables:
.I OCTREE,
.I RESOLUTION,
.I EXPOSURE
and
.I pfilt.
Following the file name, overriding variable settings may be given,
which will be passed to
.I rad
on the command line.
Settings with spaces in them should be enclosed in quotes.
The execution of
.I rad
will also update the contents of the octree, if necessary.
There is no default value for this variable.
.TP
.BR DISKSPACE
Specify the amount of disk space (in megabytes) available on the
destination file system for temporary file storage.
.I Ranimate
will coordinate its batch operations based on this amount of storage,
assuming that there is either enough additional space for all the
final frames, or that the given
.I TRANSFER
command will move the finished frames to some other location (see
below).
The default value is 100 megabytes.
.TP
.BR ARCHIVE
After each batch rendering is finished and checked for completeness,
.I ranimate
will execute the given command, passing the names of all the
original pictures and z-buffer files generated by
.I rpict.
(The command is executed in the destination directory, and file names
will be simple.)\0
Normally, the archive command copies the original files to a tape device
or somewhere that they can be retrieved in the event of failure in
the frame interpolation stages.
After the archive command has successfully completed, the original
renderings are removed.
There is no default value for this variable, meaning that the
original unfiltered frames will simply be removed.
Note that the last one or two rendered frames may not be copied, archived
or removed in case there is a another sequence picking up where this
one left off.
.TP
.BR TRANSFER
The command to transfer the completed animation frames.
The shell changes to the destination directory and appends
the names of all the finished frames to this command
before it is executed.
Normally, the transfer command does something such as convert the
frames to another format and/or copy them to tape or some other
destination device before removing them.
If this variable is not given, the final frames are left where they
are.
(See
.I BASENAME,
above.)\0
.TP
.BR RSH
The command to use instead of
.I ssh(1)
to execute commands remotely on another machine.
The arguments and behavior of this program must be identical to the UNIX
.I ssh
command, except that the
.I -l
option will always be used to specify an alternate user name rather than the
.I "user@host"
convention.
Th
.I -l
option may or may not appear, but the
.I -n
option will always be used, and the expected starting directory will
be that of the remote user, just as with
.I ssh.
.TP
.BR NEXTANIM
This variable specifies the next
.I ranfile
to use after this sequence is completed.
This offers a convenient means to continue an animation that
requires different control options in different segments.
It is important in this case to correctly set the
.I START
and
.I END
variables in each
.I ranfile
so that the segments do not overlap frames.
.TP
.BR OVERSAMPLE
This variable sets the multiplier of the original image size
relative to the final size given by the
.I RESOLUTION
variable.
This determines the quality of anti-aliasing in the final frames.
A value of 1 means no anti-aliasing, and a value of 3 produces very
good anti-aliasing.
The default value is 2.
(A fractional value may be used for previews, causing low
resolution frames with large, blocky pixels to be produced.)\0
.TP
.BR INTERPOLATE
This variable sets the number of frames to interpolate between each
rendered frame in a static scene walk-through.
Z-buffers for each rendered frame will be generated by
.I rpict,
and
.I pinterp
will be called to perform the actual "tweening."
This results in a potentially large savings in rendering time, but
should be used with caution since certain information may be lost or
inaccurate, such as specular highlights and reflections, and objects
may even break apart if too few renderings are used to interpolate
too much motion.
The default value for this variable is 0, meaning no interpolation.
Interpolation is also switched off if the
.I ANIMATE
variable is specified.
.TP
.BR MBLUR
This variable specifies the fraction of a frame time that the shutter
is simulated as being open for motion blur.
A number of samples may be given as a second argument, which
controls the number of additional frames computed and averaged
together by
.I pinterp.
If this number is less than 2, then bluring is performed by
.I rpict
only, resulting in greater noise than the combination of
.I rpict
and
.I pinterp
used otherwise.
(The default value for number of samples is 5.)\0
The default fraction is 0, meaning no motion blurring.
This option does not currently work with the
.I ANIMATE
variable, since pinterp only works for static environments.
.TP
.BR DBLUR
This variable specifies the aperture diameter for depth-of-field blurring,
in world units.
A number of samples may be given as a second argument, which controls the
number of additional frames computed and averaged together by
.I pinterp.
If this number is less than 2, then blurring is performed by
.I rpict
only, resulting in greater noise than the combination of
.I rpict
and
.I pinterp
used otherwise.
(The default value for number of samples is 5.)\0
To simulate a particular camera's aperture, divide the focal length of
the lens by the f-number, then convert to the corresponding
world coordinate units.
For example, if you wish to simulate a 50mm lens at f/2.0 in
a scene modeled in meters, then you divide 50mm by 2.0 to get 25mm,
which corresponds to an effective aperture of 0.025 meters.
The default aperture is 0, meaning no depth-of-field blurring.
This option does not currently work with the
.I ANIMATE
variable, since pinterp only works for static environments.
.TP
.BR RTRACE
This boolean variable tells
.I ranimate
whether or not to employ
.I rtrace
during frame interpolation using the
.I \-fr
option to
.I pinterp.
If set to True, then the same rendering options and static octree
are passed to
.I rtrace
as are normally used by
.I rpict.
The default value is False.
Note that this variable only applies to static environment
walk-throughs (i.e., no
.I ANIMATE
command).
.TP
.BR RESOLUTION
This variable specifies the desired final picture resolution.
If only a single number is given, this value will be used for both
the horizontal and vertical picture dimensions.
If two numbers are given, the first is the horizontal resolution and
the second is the vertical resolution.
If three numbers are given, the third is taken as the pixel aspect
ratio for the final picture (a real value).
If the pixel aspect ratio is zero, the exact dimensions given will
be those produced.
Otherwise, they will be used as a frame in which the final image
must fit.
The default value for this variable is 640.
.TP
.BR render
This variable may be used to specify additional options to
.I rpict
or
.I rtrace.
These options will appear after the options set automatically by
.I rad,
and thus will override the default values.
.TP
.BR pinterp
This variable may be used to specify additional options to
.I pinterp,
which is used to interpolate frames for a static scene walk-through.
(See the
.I pinterp
man page, and the
.I INTERPOLATE
variable.)\0
Do not use this variable to set the
.I pinterp
.I \-fr
option, but use the
.I RTRACE
setting instead.
.TP
.BR pfilt
This variable may be used to specify additional options to
.I pfilt.
If this variable is given in the
.I ranfile,
then
.I pfilt
will always be used.
(Normally,
.I pfilt
is called only if
.I pinterp
is not needed or automatic exposure is required.)\0
See the
.I pfilt
manual page for details.
.SH EXAMPLES
A minimal input file for
.I ranimate
might look like this:
.IP "" .3i
.nf
::::::::::
sample.ran
::::::::::
# The rad input file for our static scene:
RIF= tutor.rif
# The spool directory:
DIRECTORY= anim1
# The view file containing one view per frame:
VIEWFILE= anim1.vf
# The amount of temporary disk space available:
DISKSPACE= 50   # megabytes
.fi
.PP
Note that most of the variables are not set in this file.
If we only want to see what default values
.I ranimate
would use without actually executing anything, we can invoke it
thus:
.IP "" .2i
ranimate -n -e sample.ran
.PP
This will print the variables we have given as well as default
values
.I ranimate
has assigned for us.
Also, we will see the list of commands that
.I ranimate
would have executed had the
.I \-n
option not been present.
.PP
Usually, we execute
.I ranimate
in the background, redirecting the standard output and standard
error to a file:
.IP "" .2i
ranimate sample.ran >& sample.err &
.PP
If we decide that the default values
.I ranimate
has chosen for our variables are not all appropriate, we can add
some more assignments to the file:
.IP "" .3i
.nf
host= rays 3 ~greg/obj/tutor ray        # execute as ray on multi-host "rays"
host= thishost                          # execute one copy on this host also
INTERP= 3                               # render every fourth frame
RES= 1024                               # shoot for 1024x resolution
MBLUR= .25                              # apply camera motion blur
EXP= anim1.exp                          # adjust exposure according to file
pfilt= -r .9                            # use Gaussian filtering
ARCHIVE= tar cf /dev/nrtape             # save original renderings to tape
.fi
.PP
Note the use of abbreviation for variable names.
.SH FILES
$(DIRECTORY)/STATUS     animation status file
$(DIRECTORY)/*          other temporary files
$(BASENAME).pic         final animation frames
.SH AUTHOR
Greg Ward
.SH BUGS
Due to the difficulty of controlling processes on multiple execution
hosts, the
.I \-n
option of
.I ranimate
is not useful in the same way as
.I rad
for generating a script of executable commands to render the
sequence.
It may give an idea of the sequence of events, but certain temporary
files and so forth will not be in the correct state if the user
attempts to create a separate batch script.
.PP
If multiple processors are available on a given host and the
.I RTRACE
variable is set to True, then the
.I \-PP
option of
.I rtrace
should be employed, but it is not.
There is no easy way around this problem, but it has only minor
consequences in most cases.
(The
.I \-PP
option is used for
.I rpict,
however.)\0
.I
.PP
The current implementation of the remote shell does not return the
exit status of the remote process, which makes it difficult to
determine for sure if there has been a serious error or not.
Because of this,
.I ranimate
normally turns off warnings on all rendering processes, and takes
any output to standard error from a remote command as a sign that a
fatal error has occurred.
(This also precludes the use of the
.I \-t
option to report rendering progress.)\0
If the error was caused by a process server going down, the server
is removed from the active list and frame recovery takes place.
Otherwise,
.I ranimate
quits at that point in the animation.
.PP
The current execution environment, in particular the RAYPATH variable,
will not be passed during remote command execution, so it is necessary
to set whatever variables are important in the remote startup script
(e.g., ".cshrc" for the C-shell).
This requirement may be circumvented by substituting the
.I on(1)
command for
.I ssh(1)
using the
.I RSH
control variable, or by writing a custom remote execution script.
.PP
If a different remote user name is used,
.I ranimate
first attempts to change to the original user's directory with a
command of the form
.I "cd \~uname".
This works under
.I csh(1),
but may fail under other shells such as
.I sh(1).
.PP
If multiple hosts with different floating point formats are used,
.I pinterp
will fail because the Z-buffer files will be inconsistent.
(Recall that
.I pinterp
is called if INTERPOLATE > 0 and/or MBLUR is assigned.)\0
Since most modern machines use IEEE floating point, this is not
usually a problem, but it is something to keep in mind.
.SH "SEE ALSO"
pfilt(1), pinterp(1), pmblur(1), rad(1),
ranimove(1), rpict(1), ssh(1), rtrace(1)
Revision:	1.5
Committed:	Mon Feb 7 17:08:16 2005 UTC (19 years, 3 months ago) by greg
Branch:	MAIN
CVS Tags:	rad3R7P2, rad3R7P1
Changes since 1.4:	+6 -6 lines
Log Message:	Switched from using "rsh" to "ssh" in ranimate
#	User	Rev	Content
1	greg	1.5	.\" RCSid "$Id: ranimate.1,v 1.4 2005/01/18 20:19:56 greg Exp $"
2	greg	1.1	.TH RANIMATE 1 6/24/98 RADIANCE
3			.SH NAME
4			ranimate - compute a RADIANCE animation
5			.SH SYNOPSIS
6			.B ranimate
7			[
8			.B \-s
9			][
10			.B \-n
11			][
12			.B \-e
13			][
14			.B \-w
15			]
16			.B ranfile
17			.SH DESCRIPTION
18			.I Ranimate
19			is an executive program that reads the given
20			.I ranfile
21			and makes appropriate calls to
22			.I rad(1),
23			.I rpict(1),
24			.I pinterp(1),
25			and/or
26			.I pfilt(1)
27			to render an animation.
28			Variables in
29			.I ranfile
30			indicate input files, process servers (execution hosts), output
31			directories and file names, and various other controls and options.
32			.PP
33			Normally, commands are echoed to the standard output as they are
34			executed.
35			The
36			.I \-s
37			option tells
38			.I ranimate
39			to do its work silently.
40			The
41			.I \-n
42			option tells
43			.I ranimate
44			not to take any action (ie. not to actually execute any commands).
45			The
46			.I \-e
47			option tells
48			.I ranimate
49			to explicate all variables used for the animation, including
50			default values not specified in the input file, and print them on
51			the standard output.
52			.PP
53			The
54			.I \-w
55			option turns off warnings about multiply and misassigned variables.
56			.PP
57			Normally,
58			.I ranimate
59			will produce one animation frame for each view given in the specified
60			view file.
61			If an animation has ended or been killed in an incomplete state, however,
62			.I ranimate
63			will attempt to pick up where the earlier process left off.
64			If the process is still running, or was started on another machine,
65			.I ranimate
66			will report this information and exit.
67			.PP
68			Animation variable assignments appear one per line in
69			.I ranfile.
70			The name of the variable is followed by an equals sign
71			('=') and its value(s).
72			The end of line may be escaped with a backslash ('\\'), though it is
73			not usually necessary since additional variable values may be given
74			in multiple assignments.
75			Variables that should have only one value are given in upper case.
76			Variables that may have multiple values are given in lower case.
77			Variables may be abbreviated by their first three letters, except
78			for "host", which must have all four.
79			Comments in
80			.I ranfile
81			start with a pound sign ('#') and proceed to the end of line.
82			.PP
83			The animation variables, their interpretations and default values
84			are given below.
85			.TP 10n
86			.BR DIRECTORY
87			The name of the animation directory.
88			All temporary files generated during the animation will be placed in
89			this directory, which will be created by
90			.I ranimate
91			if it does not exist.
92			A file named "STATUS" will also be created there, and will contain current
93			information about the animation process.
94			This variable has no default value, and its setting is required.
95			.TP
96			.BR OCTREE
97			The name of the octree file for a static scene walk-through
98			animation.
99			There is no default value for this variable, and any
100			setting will be ignored if the
101			.I ANIMATE
102			variable is also set (see below).
103			.TP
104			.BR ANIMATE
105			The scene generation command for a dynamic animation.
106			This command, if given, will be executed with the frame number as the
107			final argument, and on its standard output it must produce
108			the complete octree for that frame.
109			Care must be taken that this command does not create any temporary files
110			that might collide with same-named files created by other
111			animation commands running in parallel.
112			Also, the command should produce no output to the standard error, unless
113			there is a fatal condition.
114			(I.e., switch all warnings off;
115			see the BUGS section, below.)\0
116			There is no default animation command, and either this variable or the
117			.I OCTREE
118			variable must be set.
119			.TP
120			.BR VIEWFILE
121			This variable names a file from which
122			.I ranimate
123			may extract the view for each frame in the animation.
124			This file should contain one valid view per frame, starting with
125			frame 1 on line 1, regardless of the setting of the
126			.I START
127			variable.
128			An exception is made for a view file with only a single view, which
129			is used for every frame of a dynamic scene animation.
130			This variable is required, and there is no default value.
131			.TP
132			.BR START
133			The initial frame number in this animation sequence.
134			The minimum value is 1, and if a later starting frame is given,
135			.I ranimate
136			assumes that the earlier frames are included in some other
137			.I ranfile,
138			which has been previously executed.
139			(See the
140			.I NEXTANIM
141			variable, below.)\0
142			The default value is 1.
143			.TP
144			.BR END
145			The final frame number in this sequence.
146			The minimum value is equal to the
147			.I START
148			frame,
149			and the default value is computed from the number of views in the
150			given
151			.I VIEWFILE.
152			.TP
153			.BR EXPOSURE
154			This variable tells
155			.I ranimate
156			how to adjust the exposure for each frame.
157			As in
158			.I pfilt,
159			the exposure setting may be given either as a multiplier or as a
160			number of f-stop adjustments (eg. +2 or -1.5).
161			Alternatively, a file name may be given, which
162			.I ranimate
163			will interpret as having one exposure value per line per frame,
164			beginning with frame 1 at line 1.
165			(See also the
166			.I VIEWFILE
167			variable, above.)\0
168			There is no default value for this variable.
169			If it is not given, an average level will be computed by
170			.I pfilt
171			for each frame.
172			.TP
173			.BR BASENAME
174			The base output file name for the final frames.
175			This string will be passed to the
176			.I \-o
177			and
178			.I \-z
179			options of rpict, along with appropriate suffixes,
180			and thus should contain a
181			.I printf(3)
182			style integer field to distinguish one frame number from another.
183			The final frames will use this name with a ".pic" suffix.
184			The default value is the assigned
185			.I DIRECTORY
186			followed by "/frame%03d".
187			.TP
188			.BR host
189			A host to use for command execution.
190			This variable may be assigned a host name, followed by an optional
191			number of parallel processes, followed by an optional
192			directory (relative to the user's home directory on that machine),
193			followed by an alternate user name.
194			Multiple
195			.I host
196			assignments may appear.
197			It is not advisable to specify more than one process on a single-CPU
198			host, as this just tends to slow things down.
199			The default value is "localhost", which starts a single process in
200			the current directory of the local machine.
201			.TP
202			.BR RIF
203			This variable specifies a
204			.I rad
205			input file to use as a source of rendering options and other
206			variable settings.
207			If given,
208			.I ranimate
209			will execute
210			.I rad
211			and create an options file to later pass to
212			.I rpict
213			or
214			.I rtrace.
215			Besides prepending the
216			.I render
217			variable,
218			.I ranimate
219			will also extract default settings for the common variables:
220			.I OCTREE,
221			.I RESOLUTION,
222			.I EXPOSURE
223			and
224			.I pfilt.
225			Following the file name, overriding variable settings may be given,
226			which will be passed to
227			.I rad
228			on the command line.
229			Settings with spaces in them should be enclosed in quotes.
230			The execution of
231			.I rad
232			will also update the contents of the octree, if necessary.
233			There is no default value for this variable.
234			.TP
235			.BR DISKSPACE
236			Specify the amount of disk space (in megabytes) available on the
237			destination file system for temporary file storage.
238			.I Ranimate
239			will coordinate its batch operations based on this amount of storage,
240			assuming that there is either enough additional space for all the
241			final frames, or that the given
242			.I TRANSFER
243			command will move the finished frames to some other location (see
244			below).
245			The default value is 100 megabytes.
246			.TP
247			.BR ARCHIVE
248			After each batch rendering is finished and checked for completeness,
249			.I ranimate
250			will execute the given command, passing the names of all the
251			original pictures and z-buffer files generated by
252			.I rpict.
253			(The command is executed in the destination directory, and file names
254			will be simple.)\0
255			Normally, the archive command copies the original files to a tape device
256			or somewhere that they can be retrieved in the event of failure in
257			the frame interpolation stages.
258			After the archive command has successfully completed, the original
259			renderings are removed.
260			There is no default value for this variable, meaning that the
261			original unfiltered frames will simply be removed.
262			Note that the last one or two rendered frames may not be copied, archived
263			or removed in case there is a another sequence picking up where this
264			one left off.
265			.TP
266			.BR TRANSFER
267			The command to transfer the completed animation frames.
268			The shell changes to the destination directory and appends
269			the names of all the finished frames to this command
270			before it is executed.
271			Normally, the transfer command does something such as convert the
272			frames to another format and/or copy them to tape or some other
273			destination device before removing them.
274			If this variable is not given, the final frames are left where they
275			are.
276			(See
277			.I BASENAME,
278			above.)\0
279			.TP
280			.BR RSH
281			The command to use instead of
282	greg	1.5	.I ssh(1)
283	greg	1.1	to execute commands remotely on another machine.
284			The arguments and behavior of this program must be identical to the UNIX
285	greg	1.5	.I ssh
286	greg	1.1	command, except that the
287			.I -l
288			option will always be used to specify an alternate user name rather than the
289			.I "user@host"
290			convention.
291			Th
292			.I -l
293			option may or may not appear, but the
294			.I -n
295			option will always be used, and the expected starting directory will
296			be that of the remote user, just as with
297	greg	1.5	.I ssh.
298	greg	1.1	.TP
299			.BR NEXTANIM
300			This variable specifies the next
301			.I ranfile
302			to use after this sequence is completed.
303			This offers a convenient means to continue an animation that
304			requires different control options in different segments.
305			It is important in this case to correctly set the
306			.I START
307			and
308			.I END
309			variables in each
310			.I ranfile
311			so that the segments do not overlap frames.
312			.TP
313			.BR OVERSAMPLE
314			This variable sets the multiplier of the original image size
315			relative to the final size given by the
316			.I RESOLUTION
317			variable.
318			This determines the quality of anti-aliasing in the final frames.
319			A value of 1 means no anti-aliasing, and a value of 3 produces very
320			good anti-aliasing.
321			The default value is 2.
322			(A fractional value may be used for previews, causing low
323			resolution frames with large, blocky pixels to be produced.)\0
324			.TP
325			.BR INTERPOLATE
326			This variable sets the number of frames to interpolate between each
327			rendered frame in a static scene walk-through.
328			Z-buffers for each rendered frame will be generated by
329			.I rpict,
330			and
331			.I pinterp
332			will be called to perform the actual "tweening."
333			This results in a potentially large savings in rendering time, but
334			should be used with caution since certain information may be lost or
335			inaccurate, such as specular highlights and reflections, and objects
336			may even break apart if too few renderings are used to interpolate
337			too much motion.
338			The default value for this variable is 0, meaning no interpolation.
339			Interpolation is also switched off if the
340			.I ANIMATE
341			variable is specified.
342			.TP
343			.BR MBLUR
344			This variable specifies the fraction of a frame time that the shutter
345			is simulated as being open for motion blur.
346			A number of samples may be given as a second argument, which
347			controls the number of additional frames computed and averaged
348			together by
349			.I pinterp.
350			If this number is less than 2, then bluring is performed by
351			.I rpict
352			only, resulting in greater noise than the combination of
353			.I rpict
354			and
355	greg	1.3	.I pinterp
356			used otherwise.
357	greg	1.1	(The default value for number of samples is 5.)\0
358	greg	1.3	The default fraction is 0, meaning no motion blurring.
359			This option does not currently work with the
360			.I ANIMATE
361			variable, since pinterp only works for static environments.
362			.TP
363			.BR DBLUR
364			This variable specifies the aperture diameter for depth-of-field blurring,
365			in world units.
366			A number of samples may be given as a second argument, which controls the
367			number of additional frames computed and averaged together by
368			.I pinterp.
369			If this number is less than 2, then blurring is performed by
370			.I rpict
371			only, resulting in greater noise than the combination of
372			.I rpict
373			and
374	greg	1.1	.I pinterp
375	greg	1.3	used otherwise.
376			(The default value for number of samples is 5.)\0
377	greg	1.4	To simulate a particular camera's aperture, divide the focal length of
378			the lens by the f-number, then convert to the corresponding
379			world coordinate units.
380			For example, if you wish to simulate a 50mm lens at f/2.0 in
381			a scene modeled in meters, then you divide 50mm by 2.0 to get 25mm,
382			which corresponds to an effective aperture of 0.025 meters.
383	greg	1.3	The default aperture is 0, meaning no depth-of-field blurring.
384	greg	1.1	This option does not currently work with the
385			.I ANIMATE
386			variable, since pinterp only works for static environments.
387			.TP
388			.BR RTRACE
389			This boolean variable tells
390			.I ranimate
391			whether or not to employ
392			.I rtrace
393			during frame interpolation using the
394			.I \-fr
395			option to
396			.I pinterp.
397			If set to True, then the same rendering options and static octree
398			are passed to
399			.I rtrace
400			as are normally used by
401			.I rpict.
402			The default value is False.
403			Note that this variable only applies to static environment
404			walk-throughs (i.e., no
405			.I ANIMATE
406			command).
407			.TP
408			.BR RESOLUTION
409			This variable specifies the desired final picture resolution.
410			If only a single number is given, this value will be used for both
411			the horizontal and vertical picture dimensions.
412			If two numbers are given, the first is the horizontal resolution and
413			the second is the vertical resolution.
414			If three numbers are given, the third is taken as the pixel aspect
415			ratio for the final picture (a real value).
416			If the pixel aspect ratio is zero, the exact dimensions given will
417			be those produced.
418			Otherwise, they will be used as a frame in which the final image
419			must fit.
420			The default value for this variable is 640.
421			.TP
422			.BR render
423			This variable may be used to specify additional options to
424			.I rpict
425			or
426			.I rtrace.
427			These options will appear after the options set automatically by
428			.I rad,
429			and thus will override the default values.
430			.TP
431			.BR pinterp
432			This variable may be used to specify additional options to
433			.I pinterp,
434			which is used to interpolate frames for a static scene walk-through.
435			(See the
436			.I pinterp
437			man page, and the
438			.I INTERPOLATE
439			variable.)\0
440			Do not use this variable to set the
441			.I pinterp
442			.I \-fr
443			option, but use the
444			.I RTRACE
445			setting instead.
446			.TP
447			.BR pfilt
448			This variable may be used to specify additional options to
449			.I pfilt.
450			If this variable is given in the
451			.I ranfile,
452			then
453			.I pfilt
454			will always be used.
455			(Normally,
456			.I pfilt
457			is called only if
458			.I pinterp
459			is not needed or automatic exposure is required.)\0
460			See the
461			.I pfilt
462			manual page for details.
463			.SH EXAMPLES
464			A minimal input file for
465			.I ranimate
466			might look like this:
467			.IP "" .3i
468			.nf
469			::::::::::
470			sample.ran
471			::::::::::
472			# The rad input file for our static scene:
473			RIF= tutor.rif
474			# The spool directory:
475			DIRECTORY= anim1
476			# The view file containing one view per frame:
477			VIEWFILE= anim1.vf
478			# The amount of temporary disk space available:
479			DISKSPACE= 50 # megabytes
480			.fi
481			.PP
482			Note that most of the variables are not set in this file.
483			If we only want to see what default values
484			.I ranimate
485			would use without actually executing anything, we can invoke it
486			thus:
487			.IP "" .2i
488			ranimate -n -e sample.ran
489			.PP
490			This will print the variables we have given as well as default
491			values
492			.I ranimate
493			has assigned for us.
494			Also, we will see the list of commands that
495			.I ranimate
496			would have executed had the
497			.I \-n
498			option not been present.
499			.PP
500			Usually, we execute
501			.I ranimate
502			in the background, redirecting the standard output and standard
503			error to a file:
504			.IP "" .2i
505			ranimate sample.ran >& sample.err &
506			.PP
507			If we decide that the default values
508			.I ranimate
509			has chosen for our variables are not all appropriate, we can add
510			some more assignments to the file:
511			.IP "" .3i
512			.nf
513			host= rays 3 ~greg/obj/tutor ray # execute as ray on multi-host "rays"
514			host= thishost # execute one copy on this host also
515			INTERP= 3 # render every fourth frame
516			RES= 1024 # shoot for 1024x resolution
517			MBLUR= .25 # apply camera motion blur
518			EXP= anim1.exp # adjust exposure according to file
519			pfilt= -r .9 # use Gaussian filtering
520			ARCHIVE= tar cf /dev/nrtape # save original renderings to tape
521			.fi
522			.PP
523			Note the use of abbreviation for variable names.
524			.SH FILES
525			$(DIRECTORY)/STATUS animation status file
526			$(DIRECTORY)/* other temporary files
527			$(BASENAME).pic final animation frames
528			.SH AUTHOR
529			Greg Ward
530			.SH BUGS
531			Due to the difficulty of controlling processes on multiple execution
532			hosts, the
533			.I \-n
534			option of
535			.I ranimate
536			is not useful in the same way as
537			.I rad
538			for generating a script of executable commands to render the
539			sequence.
540			It may give an idea of the sequence of events, but certain temporary
541			files and so forth will not be in the correct state if the user
542			attempts to create a separate batch script.
543			.PP
544			If multiple processors are available on a given host and the
545			.I RTRACE
546			variable is set to True, then the
547			.I \-PP
548			option of
549			.I rtrace
550			should be employed, but it is not.
551			There is no easy way around this problem, but it has only minor
552			consequences in most cases.
553			(The
554			.I \-PP
555			option is used for
556			.I rpict,
557			however.)\0
558			.I
559			.PP
560			The current implementation of the remote shell does not return the
561			exit status of the remote process, which makes it difficult to
562			determine for sure if there has been a serious error or not.
563			Because of this,
564			.I ranimate
565			normally turns off warnings on all rendering processes, and takes
566			any output to standard error from a remote command as a sign that a
567			fatal error has occurred.
568			(This also precludes the use of the
569			.I \-t
570			option to report rendering progress.)\0
571			If the error was caused by a process server going down, the server
572			is removed from the active list and frame recovery takes place.
573			Otherwise,
574			.I ranimate
575			quits at that point in the animation.
576			.PP
577			The current execution environment, in particular the RAYPATH variable,
578			will not be passed during remote command execution, so it is necessary
579			to set whatever variables are important in the remote startup script
580			(e.g., ".cshrc" for the C-shell).
581			This requirement may be circumvented by substituting the
582			.I on(1)
583			command for
584	greg	1.5	.I ssh(1)
585	greg	1.1	using the
586			.I RSH
587			control variable, or by writing a custom remote execution script.
588			.PP
589			If a different remote user name is used,
590			.I ranimate
591			first attempts to change to the original user's directory with a
592			command of the form
593			.I "cd \~uname".
594			This works under
595			.I csh(1),
596			but may fail under other shells such as
597			.I sh(1).
598			.PP
599			If multiple hosts with different floating point formats are used,
600			.I pinterp
601			will fail because the Z-buffer files will be inconsistent.
602			(Recall that
603			.I pinterp
604			is called if INTERPOLATE > 0 and/or MBLUR is assigned.)\0
605			Since most modern machines use IEEE floating point, this is not
606			usually a problem, but it is something to keep in mind.
607			.SH "SEE ALSO"
608			pfilt(1), pinterp(1), pmblur(1), rad(1),
609	greg	1.5	ranimove(1), rpict(1), ssh(1), rtrace(1)