| 1 |
.\" RCSid "$Id: pextrem.1,v 1.3 2022/02/04 20:11:48 greg Exp $" |
| 2 |
.TH PEXTREM 1 11/15/93 RADIANCE |
| 3 |
.SH NAME |
| 4 |
pextrem - find minimum and maximum values in RADIANCE picture |
| 5 |
.SH SYNOPSIS |
| 6 |
.B pextrem |
| 7 |
[ |
| 8 |
.B "-o | -O" |
| 9 |
] |
| 10 |
[ |
| 11 |
picture |
| 12 |
] |
| 13 |
.SH DESCRIPTION |
| 14 |
.I Pextrem |
| 15 |
locates the minimum and maximum values for the input |
| 16 |
.I picture, |
| 17 |
and prints their pixel locations and color values. |
| 18 |
The first line printed contains the x and y pixel location |
| 19 |
(x measured from the left margin, y measured from the bottom), |
| 20 |
followed by the red, green and blue values. |
| 21 |
The second line printed contains the same information for the |
| 22 |
maximum value. |
| 23 |
.PP |
| 24 |
The |
| 25 |
.I \-o |
| 26 |
option prints the original (radiance) values, undoing any exposure |
| 27 |
or color correction done on the picture. |
| 28 |
If the input is XYZE, then the second channel is in candelas/meter^2, |
| 29 |
unless |
| 30 |
.I \-O |
| 31 |
is specified, when watts/sr/meter^2 are always reported. |
| 32 |
.PP |
| 33 |
If no input |
| 34 |
.I picture |
| 35 |
is given, the standard input is read. |
| 36 |
.SH NOTES |
| 37 |
The luminance value is used for comparison of pixels, although in |
| 38 |
certain anomolous cases (ie. highly saturated colors) it is possible that |
| 39 |
.I pextrem |
| 40 |
will not pick the absolute minimum or maximum luminance value. |
| 41 |
This is because a fast integer-space comparison is used. |
| 42 |
A more reliable floating-point comparison would be slower by |
| 43 |
an order of magnitude. |
| 44 |
.PP |
| 45 |
Hyperspectral pictures report min/max values as RGB colors for |
| 46 |
output consistency. |
| 47 |
.SH AUTHOR |
| 48 |
Greg Ward |
| 49 |
.SH "SEE ALSO" |
| 50 |
falsecolor(1), getinfo(1), pcomb(1), pcompos(1), pextrem(1), pfilt(1), |
| 51 |
pflip(1), protate(1), psign(1), rpict(1), ximage(1) |
