man/man1/ies2rad.1

.\" RCSid "$Id: ies2rad.1,v 1.2 2003/12/09 15:59:06 greg Exp $"
.TH IES2RAD 1 6/14/96 RADIANCE
.SH NAME
ies2rad - convert IES luminaire data to RADIANCE description
.SH SYNOPSIS
.B ies2rad
[
.B options
]
[
.B input ..
]
.SH DESCRIPTION
.I Ies2rad
converts one or more IES luminaire data files to the equivalent RADIANCE
scene description.
The light source geometry will always be centered at the origin aimed
in the negative z direction, with the 0 degree plane along the x axis.
Usually, two output files will be created for every input file, one
scene file (with a ".rad" suffix) and one data file (with a ".dat"
suffix).
If the IES input file includes tilt data, then another data file
will be created (with a "+.dat" suffix).
If the
.I \-s
option is used, the scene data will be sent to the standard output
instead of being written to a file.
Since the data file does not change with other options to
.I ies2rad,
this is a convenient way to specify different lamp colors and
multipliers inline in a scene description.
If the
.I \-g
option is used, then an octree file will be created (with the ".oct"
suffix).
The root portion of the output file names will be the same as the
corresponding input file, unless the
.I \-o
option is used.
The output files will be created in the current directory (no matter
which directory the input files came from) unless the
.I \-l
or
.I \-p
options are used.
.PP
.I Ies2rad
assigns light source colors based on information in a lamp lookup table.
Since most lamps are distinctly colored,
it is often desirable to override this lookup procedure and use
a neutral value that will produced color-balanced renderings.
In general, it is important to consider lamp color when an odd assortment
of fixture types is being used to illuminate the same scene, and
the rendering can always be balanced by pfilt(1) to a specific white value
later.
.TP 10n
.BI -l \ libdir
Set the library directory path to
.I libdir.
This is where all relative pathnames will begin for output file names.
For light sources that will be used by many people, this should be
set to some central location included in the RAYPATH environment variable.
The default is the current working directory.
.TP
.BI -p \ prefdir
Set the library subdirectory path to
.I prefdir.
This is the subdirectory from the library where all output files will
be placed.
It is often most convenient to use a subdirectory for the storage of
light sources, since there tend to be many files and placing them all
in one directory is very messy.
The default value is the empty string.
.TP
.BI -o \ outname
Set the output file name root to
.I outname.
This overrides the default output file name root which is the same as the
input file.
This option may be used for only one input file, and is required when
reading data from the standard input.
.TP
.BR -s
Send the scene information to the standard output rather than a
separate file.
This is appropriate when calling
.I ies2rad
from within a scene description via an inline command.
The data file(s) will still be written based on the output file name
root, but since this information is unaffected by command line options,
it is safe to have multiple invocations of
.I ies2rad
using the same input file and different output options.
The
.I \-s
option may be used for only one input file.
.TP
.BI -d units
Output dimensions are in
.I units,
which is one of the letters 'm', 'c', 'f', or 'i' for meters,
centimeters, feet or inches, respectively.
The letter specification may be followed by a slash ('/') and an
optional divisor.
For example,
.I \-dm/1000
would be millimeters.
The default output is in meters, regardless of the original units in
the IES input file.
Note that there is no space in this option.
.TP
.BI -i \ rad
Ignore the crude geometry given by the IES input file and use instead an illum
sphere with radius
.I rad.
This option may be useful when the user wishes to add a more accurate
geometric description to the light source model, though this need
is obviated by the recent LM-63-1995 specification, which uses MGF
detail geometry.
(See
.I \-g
option below.)\0
.TP
.BR -g
If the IES file contains MGF detail geometry, compile this geometry into
a separate octree and create a single instance referencing it
instead of including the converted geometry directly in the Radiance
output file.
This can result in a considerable memory savings for luminaires
which are later duplicated many times in a scene, though the
appearance may suffer for certain luminaires since the enclosed glow
sources will not light the local geometry as they would otherwise.
.TP
.BI -f \ lampdat
Use
.I lampdat
instead of the default lamp lookup table (lamp.tab) to map lamp
names to xy chromaticity and lumen depreciation data.
It is often helpful to have customized lookup tables for specific
manufacturers and applications.
.TP
.BI -t \ lamp
Use the given lamp type for all input files.
Normally,
.I ies2rad
looks at the header lines of the IES file to try and determine
what lamp is being used in the fixture.
If any of the lines is matched by a pattern in the lamp lookup
table (see the \-f option above), that color and depreciation factor will
be used instead of the default (see the \-c and \-u options).
The
.I lamp
specification is also looked up in the lamp table unless it is
set to "default", in which case the default color is used instead.
.TP
.BI \-c " red grn blu"
Use the given color if the type of the lamp is unknown or
the \-t option is set to "default".
If unspecified, the default color will be white.
.TP
.BI \-u \ lamp
Set the default lamp color according to the entry for
.I lamp
in the lookup table (see the \-f option).
This is the color that will be used if the input specification
does not match any lamp type patterns.
This option is used instead of the \-c option.
.TP
.BI \-m \ factor
Multiply all output quantities by
.I factor.
This is the best way to scale fixture brightness for different lamps, but care
should be taken when this option is applied to multiple files.
.SH EXAMPLE
To convert a single IES data file in inches with color balanced output
and 15% lumen depreciation,
creating the files "fluor01.rad" and "fluor01.dat" in the current directory:
.IP "" .2i
ies2rad \-di \-t default \-m .85 fluor01.ies
.PP
To convert three IES files of various types to tenths of a foot and put
them in the library "/usr/local/lib/ray" subdirectory "source/ies":
.IP "" .2i
ies2rad \-df/10 \-l /usr/local/lib/ray \-p source/ies ies01 ies02 ies03
.PP
To convert a single file and give the output a different name:
.IP "" .2i
ies2rad \-o fluorescent ies03
.SH ENVIRONMENT
RAYPATH         directories to search for lamp lookup table
.SH AUTHOR
Greg Ward
.SH BUGS
In pre\-1991 standard IES files, all header lines will be examined
for a lamp table string match.
In post\-1991 standard files, only those lamps with the [LAMP] or
[LAMPCAT] keywords will be searched.
The first match found in the file is always the one used.
This method of assigning colors to fixtures is less than perfect,
and the IES would do well to include explicit spectral information
somehow in their specification.
.PP
The IESNA LM\-63 specification prior to 1995 provided three basic source
shapes, rectangular, round, and elliptical.
The details of these shapes is vague at best.
Rectangular sources will always be rectangular, but ies2rad will
approximate round sources as spherical if the height is close to
or greater than the width and length, and as a ring otherwise.
Elliptical sources are treated the same as round sources.
The 1995 standard rectifies this problem by including detailed
luminaire geometry as MGF data, though nothing in the standard
requires manufacturers to provide this information.
.SH "SEE ALSO"
mgf2rad(1), oconv(1), pfilt(1), rad2mgf(1), rpict(1), xform(1)
Revision:	1.3
Committed:	Tue Sep 4 17:36:40 2007 UTC (16 years, 8 months ago) by greg
Branch:	MAIN
Changes since 1.2:	+15 -15 lines
Log Message:	Added backslashes in front of hyphens (thanks to Bernd Zeimetz for his effort)
#	User	Rev	Content
1	greg	1.3	.\" RCSid "$Id: ies2rad.1,v 1.2 2003/12/09 15:59:06 greg Exp $"
2	greg	1.1	.TH IES2RAD 1 6/14/96 RADIANCE
3			.SH NAME
4			ies2rad - convert IES luminaire data to RADIANCE description
5			.SH SYNOPSIS
6			.B ies2rad
7			[
8			.B options
9			]
10			[
11			.B input ..
12			]
13			.SH DESCRIPTION
14			.I Ies2rad
15			converts one or more IES luminaire data files to the equivalent RADIANCE
16			scene description.
17			The light source geometry will always be centered at the origin aimed
18			in the negative z direction, with the 0 degree plane along the x axis.
19			Usually, two output files will be created for every input file, one
20			scene file (with a ".rad" suffix) and one data file (with a ".dat"
21			suffix).
22			If the IES input file includes tilt data, then another data file
23			will be created (with a "+.dat" suffix).
24			If the
25			.I \-s
26			option is used, the scene data will be sent to the standard output
27			instead of being written to a file.
28			Since the data file does not change with other options to
29			.I ies2rad,
30			this is a convenient way to specify different lamp colors and
31			multipliers inline in a scene description.
32			If the
33			.I \-g
34			option is used, then an octree file will be created (with the ".oct"
35			suffix).
36			The root portion of the output file names will be the same as the
37			corresponding input file, unless the
38			.I \-o
39			option is used.
40			The output files will be created in the current directory (no matter
41			which directory the input files came from) unless the
42			.I \-l
43			or
44			.I \-p
45			options are used.
46			.PP
47			.I Ies2rad
48			assigns light source colors based on information in a lamp lookup table.
49			Since most lamps are distinctly colored,
50			it is often desirable to override this lookup procedure and use
51			a neutral value that will produced color-balanced renderings.
52			In general, it is important to consider lamp color when an odd assortment
53			of fixture types is being used to illuminate the same scene, and
54			the rendering can always be balanced by pfilt(1) to a specific white value
55			later.
56			.TP 10n
57			.BI -l \ libdir
58			Set the library directory path to
59			.I libdir.
60			This is where all relative pathnames will begin for output file names.
61			For light sources that will be used by many people, this should be
62			set to some central location included in the RAYPATH environment variable.
63			The default is the current working directory.
64			.TP
65			.BI -p \ prefdir
66			Set the library subdirectory path to
67			.I prefdir.
68			This is the subdirectory from the library where all output files will
69			be placed.
70			It is often most convenient to use a subdirectory for the storage of
71			light sources, since there tend to be many files and placing them all
72			in one directory is very messy.
73			The default value is the empty string.
74			.TP
75			.BI -o \ outname
76			Set the output file name root to
77			.I outname.
78			This overrides the default output file name root which is the same as the
79			input file.
80			This option may be used for only one input file, and is required when
81			reading data from the standard input.
82			.TP
83			.BR -s
84			Send the scene information to the standard output rather than a
85			separate file.
86			This is appropriate when calling
87			.I ies2rad
88			from within a scene description via an inline command.
89			The data file(s) will still be written based on the output file name
90			root, but since this information is unaffected by command line options,
91			it is safe to have multiple invocations of
92			.I ies2rad
93			using the same input file and different output options.
94			The
95			.I \-s
96			option may be used for only one input file.
97			.TP
98			.BI -d units
99			Output dimensions are in
100			.I units,
101			which is one of the letters 'm', 'c', 'f', or 'i' for meters,
102			centimeters, feet or inches, respectively.
103			The letter specification may be followed by a slash ('/') and an
104			optional divisor.
105			For example,
106			.I \-dm/1000
107			would be millimeters.
108			The default output is in meters, regardless of the original units in
109			the IES input file.
110			Note that there is no space in this option.
111			.TP
112			.BI -i \ rad
113			Ignore the crude geometry given by the IES input file and use instead an illum
114			sphere with radius
115			.I rad.
116			This option may be useful when the user wishes to add a more accurate
117			geometric description to the light source model, though this need
118			is obviated by the recent LM-63-1995 specification, which uses MGF
119			detail geometry.
120			(See
121			.I \-g
122			option below.)\0
123			.TP
124			.BR -g
125			If the IES file contains MGF detail geometry, compile this geometry into
126			a separate octree and create a single instance referencing it
127			instead of including the converted geometry directly in the Radiance
128			output file.
129			This can result in a considerable memory savings for luminaires
130			which are later duplicated many times in a scene, though the
131			appearance may suffer for certain luminaires since the enclosed glow
132			sources will not light the local geometry as they would otherwise.
133			.TP
134			.BI -f \ lampdat
135			Use
136			.I lampdat
137			instead of the default lamp lookup table (lamp.tab) to map lamp
138			names to xy chromaticity and lumen depreciation data.
139			It is often helpful to have customized lookup tables for specific
140			manufacturers and applications.
141			.TP
142			.BI -t \ lamp
143			Use the given lamp type for all input files.
144			Normally,
145			.I ies2rad
146			looks at the header lines of the IES file to try and determine
147			what lamp is being used in the fixture.
148			If any of the lines is matched by a pattern in the lamp lookup
149	greg	1.3	table (see the \-f option above), that color and depreciation factor will
150			be used instead of the default (see the \-c and \-u options).
151	greg	1.1	The
152			.I lamp
153			specification is also looked up in the lamp table unless it is
154			set to "default", in which case the default color is used instead.
155			.TP
156	greg	1.3	.BI \-c " red grn blu"
157	greg	1.1	Use the given color if the type of the lamp is unknown or
158	greg	1.3	the \-t option is set to "default".
159	greg	1.1	If unspecified, the default color will be white.
160			.TP
161	greg	1.3	.BI \-u \ lamp
162	greg	1.1	Set the default lamp color according to the entry for
163			.I lamp
164	greg	1.3	in the lookup table (see the \-f option).
165	greg	1.1	This is the color that will be used if the input specification
166			does not match any lamp type patterns.
167	greg	1.3	This option is used instead of the \-c option.
168	greg	1.1	.TP
169	greg	1.3	.BI \-m \ factor
170	greg	1.1	Multiply all output quantities by
171			.I factor.
172			This is the best way to scale fixture brightness for different lamps, but care
173			should be taken when this option is applied to multiple files.
174			.SH EXAMPLE
175			To convert a single IES data file in inches with color balanced output
176			and 15% lumen depreciation,
177			creating the files "fluor01.rad" and "fluor01.dat" in the current directory:
178			.IP "" .2i
179	greg	1.3	ies2rad \-di \-t default \-m .85 fluor01.ies
180	greg	1.1	.PP
181			To convert three IES files of various types to tenths of a foot and put
182			them in the library "/usr/local/lib/ray" subdirectory "source/ies":
183			.IP "" .2i
184	greg	1.3	ies2rad \-df/10 \-l /usr/local/lib/ray \-p source/ies ies01 ies02 ies03
185	greg	1.1	.PP
186			To convert a single file and give the output a different name:
187			.IP "" .2i
188	greg	1.3	ies2rad \-o fluorescent ies03
189	greg	1.1	.SH ENVIRONMENT
190			RAYPATH directories to search for lamp lookup table
191			.SH AUTHOR
192			Greg Ward
193			.SH BUGS
194	greg	1.3	In pre\-1991 standard IES files, all header lines will be examined
195	greg	1.1	for a lamp table string match.
196	greg	1.3	In post\-1991 standard files, only those lamps with the [LAMP] or
197	greg	1.1	[LAMPCAT] keywords will be searched.
198			The first match found in the file is always the one used.
199			This method of assigning colors to fixtures is less than perfect,
200			and the IES would do well to include explicit spectral information
201			somehow in their specification.
202			.PP
203	greg	1.3	The IESNA LM\-63 specification prior to 1995 provided three basic source
204	greg	1.1	shapes, rectangular, round, and elliptical.
205			The details of these shapes is vague at best.
206			Rectangular sources will always be rectangular, but ies2rad will
207			approximate round sources as spherical if the height is close to
208			or greater than the width and length, and as a ring otherwise.
209			Elliptical sources are treated the same as round sources.
210			The 1995 standard rectifies this problem by including detailed
211			luminaire geometry as MGF data, though nothing in the standard
212			requires manufacturers to provide this information.
213			.SH "SEE ALSO"
214			mgf2rad(1), oconv(1), pfilt(1), rad2mgf(1), rpict(1), xform(1)