| 1 |
.\" RCSid "$Id: genblinds.1,v 1.2 2003/12/09 15:59:06 greg Exp $" |
| 2 |
.TH GENBLINDS 1 10/10/94 RADIANCE |
| 3 |
.SH NAME |
| 4 |
genblinds - generate a RADIANCE description of venetian blinds |
| 5 |
.SH SYNOPSIS |
| 6 |
.B "genblinds mat name depth width height nslats angle" |
| 7 |
[ |
| 8 |
.B "\-r|+r rcurv" |
| 9 |
] |
| 10 |
.SH DESCRIPTION |
| 11 |
.I Genblinds |
| 12 |
produces a RADIANCE scene description of a set of venetian blinds. |
| 13 |
The |
| 14 |
.I depth |
| 15 |
of the blinds (X dimension) is given first, followed by the |
| 16 |
.I width |
| 17 |
(Y dimension), followed by the |
| 18 |
.I height |
| 19 |
(Z dimension). |
| 20 |
The number of slats to place evenly within this height is given as |
| 21 |
.I nslats. |
| 22 |
The |
| 23 |
.I angle |
| 24 |
of the blind, where zero is perfectly horizontal and a |
| 25 |
positive angle tilts the positive X edge upwards, is |
| 26 |
given in degrees. |
| 27 |
The blinds are initially situated so that the corner of the bottom blind is |
| 28 |
.I "height/nslats/2" |
| 29 |
above the XY plane, and all coordinates are positive. |
| 30 |
Each new slat is placed |
| 31 |
.I "height/nslats" |
| 32 |
above the previous one, until the top slat is at |
| 33 |
.I "height - height/nslats/2". |
| 34 |
The blinds may of course be moved from this starting point with the |
| 35 |
.I "xform(1)" |
| 36 |
command. |
| 37 |
.PP |
| 38 |
If curved blinds are desired, a radius of curvature may be given |
| 39 |
with the |
| 40 |
.I "+/-r" |
| 41 |
option. |
| 42 |
If given as |
| 43 |
.I -r, |
| 44 |
The curvature is downward (which is the usual configuration). |
| 45 |
If the option is given as |
| 46 |
.I +r, |
| 47 |
then the curvature is upward. |
| 48 |
The radius indicates how far from each slat its effective |
| 49 |
cylindrical center resides. |
| 50 |
Each slat will be broken into as many polygons as is necessary to |
| 51 |
keep the delta changes in angle less than 10 degrees. |
| 52 |
(Note that this may result in a rather large number of polygons.)\0 |
| 53 |
.SH EXAMPLE |
| 54 |
To produce a curved set of blinds with 15 slats: |
| 55 |
.IP "" .2i |
| 56 |
genblinds white blind 1 46 88 118 15 -r 1 > blinds.rad |
| 57 |
.SH AUTHOR |
| 58 |
Jean-Louis Scartezzini and Greg Ward |
| 59 |
.SH "SEE ALSO" |
| 60 |
genbox(1), genrev(1), gensurf(1), genworm(1), rpict(1), rvu(1), xform(1) |
