viewcvs.cgi/platform/README

Platform configuration files for the SCons based build system
-------------------------------------------------------------

<platform>_<##>.cfg 
--------------

The <platform>_<##>.cfg files in this directory are used to determine
the right settings, libraries, source files etc. on the platform
where you are building Radiance. The build system will select the
appropriate file automatically.

If your platform isn't supported yet, then you can create a new
file with an appropriat name (SCons should tell you what it
expects). Usually, you will start by copying the file of the most
similar supported platform, and then make the necessary changes.

On unix based platforms without a specific config file, the file
"posix_<##>.cfg" will be used (which may or may not work well enough).

As of this writing, the following platforms are included where the
numbers 32 and 64 indicate 32 bit or 64 bit systems rspectively.
(although not all of them have been tested very recently):

* Linux_32.cfg    Linux
* Linux_63.cfg    Linux
* FreeBSD_32.cfg  FreeBSD unix
* FreeBSD_64.cfg  FreeBSD unix
* Darwin_64.cfg   Macintosh OS-X
* Darwin_32.cfg   Macintosh OS-X
* posix_64.cfg    default for unknown Unix systems
* posix_32.cfg    default for unknown Unix systems
* Windows_64.cfg  Microsoft Windows with Visual C/C++
* Windows_32.cfg  Microsoft Windows with Visual C/C++
* mingw_64.cfg    MingW on MS Windows  http://www.mingw.org/
* mingw_32.cfg    MingW on MS Windows  http://www.mingw.org/

The configuration for 32 bit and 64 bit architecture of the
same platform will typically be very similar, with just some
compiler flags indicating the different target.


<platform>_custom.cfg
---------------------

If you want to experiment with changes to the downloaded file, then
you can create a copy named <platform>_custom.cfg, and make your
changes there. If such a file exists, then it will be used in
place of the original.


Contents and format
-------------------

Any text starting with a hash character (#) until the end of the
line is ignored as a comment.

A config file consists of several sections, each of which is
introduced by a keyword in brackets.
Within each section, a configuration directive starts with a
keyword and a colon, followed by the data assigned to that keyword.


Sections
--------

[install] # directories where to install the software
[build]   # compile and link instructions for production builds
[debug]   # compile and link instructions for debug builds
[code]    # code compatibility configuration


Install section
---------------

Values in this section may refer to environment variables, in the
form {VARNAME}. On Windows the variable names must be given in
all uppercase.

  # The root directory of the Radiance installation
  # The second example reflects the installation standard on Windows.
RAD_BASEDIR: /opt/radiance
RAD_BASEDIR: {PROGRAMFILES}/radiance

  # The following are relative to RAD_BASEDIR!
  # The directory for executables 
RAD_BINDIR:  bin

  # The directory for support files (.cal, .pic, .fnt, etc.)
RAD_RLIBDIR: share/lib

  # The directory for the man pages
RAD_MANDIR:  share/man


Debug and Build sections
------------------------

The same keywords can (and usually will) be used in both, but
their assigned values will often differ.

  # The compiler to use (example: Gnu gcc)
CC: gcc

  # The directories for system header files (not normally needed).
CPPPATH: 

  # Symbols to define for the preprocessor (example for Mingw)
CPPDEFINES: freebsd HDSUF=.exe

  # Flags for the C preprocessor (example for gcc)
CPPFLAGS:  -O2 -Wall -Wno-uninitialized

  # Flags for the C compiler (example for debug build with gcc)
CCFLAGS: -pg

  # The directories for system libraries (not normally needed)
LIBPATH: 

  # Flags for the linker (example for debug build on Windows)
LINKFLAGS: /Yd

  # Flags specific to  ezxml.c (example for cygwin/mingw)
EZXML_CPPDEFINES: EZXML_NOMMAP

  # Where to find an installed libtiff and its include files
  # (Not needed when on a standard search path)
  # If no libtiff is found here or on the standard paths, then
  # Radiance will build its own.
TIFFLIB:
TIFFINCLUDE:


The Code section
----------------

  # There should be no need to edit this section in existing
  # config files. If you create a new file for a yet untested 
  # platform, you may need to ask on the dev-list what will
  # work here.

RAD_COMPAT:     # theoretically obsolete (src/common/strcmp.c)
RAD_MATHCOMPAT: # erf.c floating point error function
RAD_ARGSCOMPAT: # fixargv0.c for Windows
RAD_NETCOMPAT:  # [win_]netproc.c for ranimate
RAD_MLIB:       # usually 'm', or any fastlib available
RAD_SOCKETLIB:  # ws_2_32 on Windows (VC links it automatically)
RAD_PROCESS:    # our process abstraction and win_popen()
RAD_PCALLS:     # more custom process abstraction


Revision:	1.3
Committed:	Thu Mar 10 01:44:51 2016 UTC (9 years, 7 months ago) by schorsch
Branch:	MAIN
Changes since 1.2:	+35 -25 lines
Log Message:	arch dependent config
#	User	Rev	Content
1	schorsch	1.2	Platform configuration files for the SCons based build system
2			-------------------------------------------------------------
3	schorsch	1.1
4	schorsch	1.3	<platform>_<##>.cfg
5	schorsch	1.1	--------------
6
7	schorsch	1.3	The <platform>_<##>.cfg files in this directory are used to determine
8	schorsch	1.1	the right settings, libraries, source files etc. on the platform
9			where you are building Radiance. The build system will select the
10	schorsch	1.2	appropriate file automatically.
11	schorsch	1.1
12			If your platform isn't supported yet, then you can create a new
13	schorsch	1.2	file with an appropriat name (SCons should tell you what it
14	schorsch	1.1	expects). Usually, you will start by copying the file of the most
15	schorsch	1.3	similar supported platform, and then make the necessary changes.
16	schorsch	1.1
17			On unix based platforms without a specific config file, the file
18	schorsch	1.3	"posix_<##>.cfg" will be used (which may or may not work well enough).
19	schorsch	1.1
20	schorsch	1.3	As of this writing, the following platforms are included where the
21			numbers 32 and 64 indicate 32 bit or 64 bit systems rspectively.
22	schorsch	1.2	(although not all of them have been tested very recently):
23
24	schorsch	1.3	* Linux_32.cfg Linux
25			* Linux_63.cfg Linux
26			* FreeBSD_32.cfg FreeBSD unix
27			* FreeBSD_64.cfg FreeBSD unix
28			* Darwin_64.cfg Macintosh OS-X
29			* Darwin_32.cfg Macintosh OS-X
30			* posix_64.cfg default for unknown Unix systems
31			* posix_32.cfg default for unknown Unix systems
32			* Windows_64.cfg Microsoft Windows with Visual C/C++
33			* Windows_32.cfg Microsoft Windows with Visual C/C++
34			* mingw_64.cfg MingW on MS Windows http://www.mingw.org/
35			* mingw_32.cfg MingW on MS Windows http://www.mingw.org/
36
37			The configuration for 32 bit and 64 bit architecture of the
38			same platform will typically be very similar, with just some
39			compiler flags indicating the different target.
40	schorsch	1.2
41	schorsch	1.1
42			<platform>_custom.cfg
43			---------------------
44
45	schorsch	1.3	If you want to experiment with changes to the downloaded file, then
46	schorsch	1.1	you can create a copy named <platform>_custom.cfg, and make your
47			changes there. If such a file exists, then it will be used in
48			place of the original.
49
50
51			Contents and format
52			-------------------
53
54			Any text starting with a hash character (#) until the end of the
55			line is ignored as a comment.
56
57			A config file consists of several sections, each of which is
58			introduced by a keyword in brackets.
59			Within each section, a configuration directive starts with a
60	schorsch	1.2	keyword and a colon, followed by the data assigned to that keyword.
61	schorsch	1.1
62
63			Sections
64			--------
65
66			[install] # directories where to install the software
67	schorsch	1.2	[build] # compile and link instructions for production builds
68			[debug] # compile and link instructions for debug builds
69	schorsch	1.1	[code] # code compatibility configuration
70
71
72			Install section
73			---------------
74
75	schorsch	1.3	Values in this section may refer to environment variables, in the
76			form {VARNAME}. On Windows the variable names must be given in
77			all uppercase.
78
79	schorsch	1.1	# The root directory of the Radiance installation
80	schorsch	1.3	# The second example reflects the installation standard on Windows.
81			RAD_BASEDIR: /opt/radiance
82			RAD_BASEDIR: {PROGRAMFILES}/radiance
83	schorsch	1.1
84			# The following are relative to RAD_BASEDIR!
85			# The directory for executables
86			RAD_BINDIR: bin
87	schorsch	1.2
88	schorsch	1.1	# The directory for support files (.cal, .pic, .fnt, etc.)
89			RAD_RLIBDIR: share/lib
90	schorsch	1.2
91			# The directory for the man pages
92	schorsch	1.1	RAD_MANDIR: share/man
93
94
95			Debug and Build sections
96			------------------------
97
98	schorsch	1.3	The same keywords can (and usually will) be used in both, but
99			their assigned values will often differ.
100	schorsch	1.1
101			# The compiler to use (example: Gnu gcc)
102			CC: gcc
103
104	schorsch	1.2	# The directories for system header files (not normally needed).
105	schorsch	1.1	CPPPATH:
106
107	schorsch	1.3	# Symbols to define for the preprocessor (example for Mingw)
108	schorsch	1.1	CPPDEFINES: freebsd HDSUF=.exe
109
110	schorsch	1.3	# Flags for the C preprocessor (example for gcc)
111	schorsch	1.1	CPPFLAGS: -O2 -Wall -Wno-uninitialized
112
113	schorsch	1.2	# Flags for the C compiler (example for debug build with gcc)
114	schorsch	1.1	CCFLAGS: -pg
115
116	schorsch	1.2	# The directories for system libraries (not normally needed)
117	schorsch	1.1	LIBPATH:
118
119			# Flags for the linker (example for debug build on Windows)
120	schorsch	1.3	LINKFLAGS: /Yd
121	schorsch	1.1
122			# Flags specific to ezxml.c (example for cygwin/mingw)
123			EZXML_CPPDEFINES: EZXML_NOMMAP
124
125			# Where to find an installed libtiff and its include files
126			# (Not needed when on a standard search path)
127			# If no libtiff is found here or on the standard paths, then
128			# Radiance will build its own.
129			TIFFLIB:
130			TIFFINCLUDE:
131
132
133			The Code section
134			----------------
135
136			# There should be no need to edit this section in existing
137			# config files. If you create a new file for a yet untested
138	schorsch	1.2	# platform, you may need to ask on the dev-list what will
139			# work here.
140	schorsch	1.1
141			RAD_COMPAT: # theoretically obsolete (src/common/strcmp.c)
142			RAD_MATHCOMPAT: # erf.c floating point error function
143			RAD_ARGSCOMPAT: # fixargv0.c for Windows
144			RAD_NETCOMPAT: # [win_]netproc.c for ranimate
145			RAD_MLIB: # usually 'm', or any fastlib available
146			RAD_SOCKETLIB: # ws_2_32 on Windows (VC links it automatically)
147			RAD_PROCESS: # our process abstraction and win_popen()
148			RAD_PCALLS: # more custom process abstraction
149
150	schorsch	1.2
151