man/man1/arch2rad.1

.\" RCSid "$Id: arch2rad.1,v 1.2 2003/12/09 15:59:06 greg Exp $"
.TH ARCH2RAD 1 11/15/93 RADIANCE
.SH NAME
arch2rad - convert Architrion text file to RADIANCE description
.SH SYNOPSIS
.B arch2rad
[
.B \-n
][
.B "\-m mapfile"
]
[
.B input
]
.SH DESCRIPTION
.I Arch2rad
converts an Architrion text file to a RADIANCE scene description.
The material names for the surfaces will assigned based on the
default mapping or the mapping rules file given in the
.I \-m
option.
A mapping file contains a list of materials followed by the conditions
a surface must satisfy in order to have that material.
.PP
For example, if we wanted all surfaces for blocks with RefId "thingy" and
Color 152 to use the material "wood", and all other surfaces to use the
material "default", we would create the following mapping file:
.nf

        default ;
        wood (RefId "thingy") (Color 152) ;

.fi
All surfaces would satisfy the first set of conditions (which is empty),
but only the surfaces in blocks with RefId "thingy"
and Color 152 would satisfy the
second set of conditions.
.PP
Each rule can have up to one condition per qualifier, and different
translators use different qualifiers.
In
.I arch2rad,
the valid qualifiers are
.I "Layer, Color, Face"
and
.I RefId.
A condition is either a single value for a
specific attribute, or an integer range of values.
(Integer ranges are
specified in brackets and separated by a colon, eg. [\-15:27], and are
always inclusive.)  A semicolon is used to indicate the end of a rule,
which can extend over several lines if necessary.
.PP
The semantics of the rule are such that "and" is the implied conjunction
between conditions.
Thus, it makes no sense to have more than one
condition in a rule for a given qualifier.
If the user wants the same
material to be used for surfaces that satisfy different conditions,
they simply add more rules.
For example, if the user also wanted
surfaces in blocks with
RefId "yohey" with Colors between 50 and 100 to use "wood",
they would add the following rule to the end of the example above:
.nf

        wood (Color [50:100]) (RefId "yohey") ;

.fi
Note that the order of conditions in a rule is irrelevant.
However,
the order of rules is very important, since the last rule satisfied
determines which material a surface is assigned.
.PP
By convention, the identifier "void" is used to delete unwanted
surfaces.
A surfaces is also deleted if it fails to match any rule.
Void is used in a rule as any other material, but it has the
effect of excluding all matching surfaces from the translator output.
For example, the following mapping would delete all surfaces in the
Layer 2 except those with the color "beige", to which it would assign 
the material "beige_cloth", and all other surfaces would be "tacky":
.nf

        tacky ;
        void (Layer 2) ;
        beige_cloth (Layer 2) (Color "beige") ;

.fi
.PP
If neither the
.I \-m
nor the
.I \-n
options are not used,
.I arch2rad
uses the default mapping file "/usr/local/lib/ray/lib/arch.map".
This file simply assigns materials based on color, using the
identifiers "c0" through "c255".
Appropriate materials for these identifiers are contained
in "/usr/local/lib/ray/lib/arch.mat".
.PP
The
.I \-n
option may be used to produce a list of qualifiers from which to construct
a mapping for the given Architrion file.
If the
.I \-m
option is used also, only those blocks matched in the mapping file
will be added to the qualifier list.
.SH DETAILS
Architrion blocks are divided into about 6 polygons.
The reference, opposite and end faces must all be quadrilaterals (ie.
four-sided polygons),
though one or more faces may disappear in certain degenerate cases.
The bottom face will usually be a quadrilateral, though it may be
written out as two triangles if the face is non-planar or one triangle
if there is a degenerate side.
The top face is treated the same as the bottom face.
.PP
Openings are currently handled using the antimatter material type.
An antimatter material called "opening" is defined that "clips" all
faces for the current block, and patches the edges of the hole with
the material defined for the face "sill".
If no rule is given specifically for the sill face, then the most
specific material (ie. the material in the latest rule)
for this block is used.
An antimatter opening will not function properly if there is another
surface intersecting it, or rendering is attempted from within the
opening.
Overlapping openings or openings with shared boundaries will also fail.
There is currently no support of Architrion "frame" libraries.
.PP
Naming of the output faces is based on layer number, reference id
and output block number (sequential from 1 to the total number of
output blocks).
If there is no reference id name, the layer name is used (if available)
instead of the layer number.
If there is a reference id number but no name, that is added as
well.
Names are truncated to the first 12 characters, so the ends of long
names may be lost.
Also, spaces in names are replaced by underscores ('_').
Finally, the face id is added to the end of the block name for each
output polygon.
An example identifier for a polygon is:
.PP
        l3.window_overh.3155.ref
.PP
This would be the reference face of output block number 3155,
reference id name "window overhangs" in layer number 3.
.SH EXAMPLE
To create a qualifier list for building.txt:
.IP "" .2i
arch2rad \-n building.txt > building.qual
.PP
To translate building.txt into a RADIANCE file using the mapping
building.map:
.IP "" .2i
arch2rad \-m building.map building.txt > building.rad
.PP
To create an octree directly from an Architrion file using the default
mapping and materials:
.IP "" .2i
oconv source.rad /usr/local/lib/ray/lib/arch.mat '\\!arch2rad building.txt' > building.oct
.SH FILES
/usr/local/lib/ray/lib/arch.map
/usr/local/lib/ray/lib/arch.mat
.SH AUTHOR
Greg Ward
.SH "SEE ALSO"
ies2rad(1), oconv(1), thf2rad(1), xform(1)
Revision:	1.3
Committed:	Tue Sep 4 17:36:40 2007 UTC (18 years, 1 month ago) by greg
Branch:	MAIN
CVS Tags:	rad5R4, rad5R2, rad5R3, rad5R0, rad5R1, rad4R2, rad6R0, rad4R1, rad4R0, rad3R9, rad4R2P1, rad4R2P2, HEAD
Changes since 1.2:	+3 -3 lines
Log Message:	Added backslashes in front of hyphens (thanks to Bernd Zeimetz for his effort)
#	User	Rev	Content
1	greg	1.3	.\" RCSid "$Id: arch2rad.1,v 1.2 2003/12/09 15:59:06 greg Exp $"
2	greg	1.1	.TH ARCH2RAD 1 11/15/93 RADIANCE
3			.SH NAME
4			arch2rad - convert Architrion text file to RADIANCE description
5			.SH SYNOPSIS
6			.B arch2rad
7			[
8			.B \-n
9			][
10			.B "\-m mapfile"
11			]
12			[
13			.B input
14			]
15			.SH DESCRIPTION
16			.I Arch2rad
17			converts an Architrion text file to a RADIANCE scene description.
18			The material names for the surfaces will assigned based on the
19			default mapping or the mapping rules file given in the
20			.I \-m
21			option.
22			A mapping file contains a list of materials followed by the conditions
23			a surface must satisfy in order to have that material.
24			.PP
25			For example, if we wanted all surfaces for blocks with RefId "thingy" and
26			Color 152 to use the material "wood", and all other surfaces to use the
27			material "default", we would create the following mapping file:
28			.nf
29
30			default ;
31			wood (RefId "thingy") (Color 152) ;
32
33			.fi
34			All surfaces would satisfy the first set of conditions (which is empty),
35			but only the surfaces in blocks with RefId "thingy"
36			and Color 152 would satisfy the
37			second set of conditions.
38			.PP
39			Each rule can have up to one condition per qualifier, and different
40			translators use different qualifiers.
41			In
42			.I arch2rad,
43			the valid qualifiers are
44			.I "Layer, Color, Face"
45			and
46			.I RefId.
47			A condition is either a single value for a
48			specific attribute, or an integer range of values.
49			(Integer ranges are
50			specified in brackets and separated by a colon, eg. [\-15:27], and are
51			always inclusive.) A semicolon is used to indicate the end of a rule,
52			which can extend over several lines if necessary.
53			.PP
54			The semantics of the rule are such that "and" is the implied conjunction
55			between conditions.
56			Thus, it makes no sense to have more than one
57			condition in a rule for a given qualifier.
58			If the user wants the same
59			material to be used for surfaces that satisfy different conditions,
60			they simply add more rules.
61			For example, if the user also wanted
62			surfaces in blocks with
63			RefId "yohey" with Colors between 50 and 100 to use "wood",
64			they would add the following rule to the end of the example above:
65			.nf
66
67			wood (Color [50:100]) (RefId "yohey") ;
68
69			.fi
70			Note that the order of conditions in a rule is irrelevant.
71			However,
72			the order of rules is very important, since the last rule satisfied
73			determines which material a surface is assigned.
74			.PP
75			By convention, the identifier "void" is used to delete unwanted
76			surfaces.
77			A surfaces is also deleted if it fails to match any rule.
78			Void is used in a rule as any other material, but it has the
79			effect of excluding all matching surfaces from the translator output.
80			For example, the following mapping would delete all surfaces in the
81			Layer 2 except those with the color "beige", to which it would assign
82			the material "beige_cloth", and all other surfaces would be "tacky":
83			.nf
84
85			tacky ;
86			void (Layer 2) ;
87			beige_cloth (Layer 2) (Color "beige") ;
88
89			.fi
90			.PP
91			If neither the
92			.I \-m
93			nor the
94			.I \-n
95			options are not used,
96			.I arch2rad
97			uses the default mapping file "/usr/local/lib/ray/lib/arch.map".
98			This file simply assigns materials based on color, using the
99			identifiers "c0" through "c255".
100			Appropriate materials for these identifiers are contained
101			in "/usr/local/lib/ray/lib/arch.mat".
102			.PP
103			The
104			.I \-n
105			option may be used to produce a list of qualifiers from which to construct
106			a mapping for the given Architrion file.
107			If the
108			.I \-m
109			option is used also, only those blocks matched in the mapping file
110			will be added to the qualifier list.
111			.SH DETAILS
112			Architrion blocks are divided into about 6 polygons.
113			The reference, opposite and end faces must all be quadrilaterals (ie.
114			four-sided polygons),
115			though one or more faces may disappear in certain degenerate cases.
116			The bottom face will usually be a quadrilateral, though it may be
117			written out as two triangles if the face is non-planar or one triangle
118			if there is a degenerate side.
119			The top face is treated the same as the bottom face.
120			.PP
121			Openings are currently handled using the antimatter material type.
122			An antimatter material called "opening" is defined that "clips" all
123			faces for the current block, and patches the edges of the hole with
124			the material defined for the face "sill".
125			If no rule is given specifically for the sill face, then the most
126			specific material (ie. the material in the latest rule)
127			for this block is used.
128			An antimatter opening will not function properly if there is another
129			surface intersecting it, or rendering is attempted from within the
130			opening.
131			Overlapping openings or openings with shared boundaries will also fail.
132			There is currently no support of Architrion "frame" libraries.
133			.PP
134			Naming of the output faces is based on layer number, reference id
135			and output block number (sequential from 1 to the total number of
136			output blocks).
137			If there is no reference id name, the layer name is used (if available)
138			instead of the layer number.
139			If there is a reference id number but no name, that is added as
140			well.
141			Names are truncated to the first 12 characters, so the ends of long
142			names may be lost.
143			Also, spaces in names are replaced by underscores ('_').
144			Finally, the face id is added to the end of the block name for each
145			output polygon.
146			An example identifier for a polygon is:
147			.PP
148			l3.window_overh.3155.ref
149			.PP
150			This would be the reference face of output block number 3155,
151			reference id name "window overhangs" in layer number 3.
152			.SH EXAMPLE
153			To create a qualifier list for building.txt:
154			.IP "" .2i
155	greg	1.3	arch2rad \-n building.txt > building.qual
156	greg	1.1	.PP
157			To translate building.txt into a RADIANCE file using the mapping
158			building.map:
159			.IP "" .2i
160	greg	1.3	arch2rad \-m building.map building.txt > building.rad
161	greg	1.1	.PP
162			To create an octree directly from an Architrion file using the default
163			mapping and materials:
164			.IP "" .2i
165			oconv source.rad /usr/local/lib/ray/lib/arch.mat '\\!arch2rad building.txt' > building.oct
166			.SH FILES
167			/usr/local/lib/ray/lib/arch.map
168			/usr/local/lib/ray/lib/arch.mat
169			.SH AUTHOR
170			Greg Ward
171			.SH "SEE ALSO"
172			ies2rad(1), oconv(1), thf2rad(1), xform(1)